tloper2

ItsM33T00

Printed some modifications for my Bug-a-salt to make it look better. Have listed all mods bellow, and included 3 modified files to make everything work. &nbsp;-First modified file is the Muzzle which has been shortened and bottom has been modified to make it straight bolt on.-Second File is the buffer tube to allow the FGC-9 MKII stock to fit the “Milspec” Buasalt 3.0 Stock Adapter.-Third file is the 3 side Picatinny Muzzle that was extended to close the gap between the Rail and Bugasalt&nbsp;Other Mods used on photo are following:&nbsp;Stock Adapterhttps://www.thingiverse.com/thing:6612288&nbsp;Top Mount Picatinny rail <a target="_blank" href="https://cults3d.com/en/3d-model/various/picatinny-rail-for-bug-a-salt" rel="nofollow noopener">https://cults3d.com/en/3d-model/various/picatinny-rail-for-bug-a-salt</a>&nbsp;MKII Stock <a target="_blank" href="https://www.printables.com/model/886172-fgc-9-mkii-stingrat-adjustable-butt-stock-set" rel="nofollow noopener">https://www.printables.com/model/886172-fgc-9-mkii-stingrat-adjustable-butt-stock-set</a>&nbsp;Vertical pump grip <a target="_blank" href="https://www.thingiverse.com/thing:6444892" rel="nofollow noopener">https://www.thingiverse.com/thing:6444892</a>&nbsp;Angled Foregrip <a target="_blank" href="https://www.thingiverse.com/thing:580466" rel="nofollow noopener">https://www.thingiverse.com/thing:580466</a>&nbsp;&nbsp;&nbsp;

Bug-a-salt modifications 

NERF/Bug Assault

Jakob1508

Easy and fast to print can lidTestet with mezzomix can 0,33l from austria

Sodacan 0,33l lid insect cover

summer

BamBam Design

Knurled handle for Socket Head Cap Screw with hexagon socket (Zylinderkopfschraube mit Innensechskant)<ul><li>Fits perfect ISO 4762 / DIN 912 Screws</li><li>Good little handle for little force</li><li>For M3, M4, M5, M6 and M8</li><li>Add a bit of glue to secure or use it as a tool</li></ul>Check out the perfect match nut handle design: <a target="_blank" href="https://makerworld.com/models/74918" rel="nofollow noopener">https://makerworld.com/models/74918</a><a target="_blank" href="https://makerworld.com/models/74918" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/770443/2023-11-26_2882214a3f319.png"></a>&nbsp;Commercial license you can get here:<a target="_blank" href="https://www.patreon.com/BamBamDesign/membership" rel="nofollow noopener">https://www.patreon.com/BamBamDesign/membership</a>

Knurled handle - M3 to M8 Socket Head Cap Screw 

HARDWARE

michelem

<figure class="image"></figure>UPDATE 05 Feb 2024:<ul><li>added 14.5mm LED size with base of 17.5mm</li></ul>UPDATE 02 Feb 2024:<ul><li>added 10mm LED size with base of 13.2mm</li></ul>UPDATE 13 Nov 2023:<ul><li>added 90° and 180° curved corners</li><li>added 8mm LED size with base of 11.8mm</li></ul>&nbsp;Hello makers,I created this model for a personal project and thought it would be helpful to share it with the community. It&#39;s a support for LED strips that could prove useful to anyone in need.&nbsp;The original project consists of a simple solid wood shelf with a square housing designed to accommodate an LED strip.&nbsp;I began with the basics: a base with an integrated guide for the LED strip. This guide allows you to secure the strip without the need for adhesives; simply slide it into the guide to keep it stable and in place.&nbsp;To attach the support to the wall or any surface (as I did in my case), you can choose between using adhesives or small screws to fit into the designated slots in the base.&nbsp;Screws must have this shape with 6mm head:&nbsp;&nbsp;<figure class="table"><table><tbody><tr><td>&nbsp;<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059751/design/2023-11-08_d66bf9bcae9ce.jpeg"></figure></td><td>&nbsp;&nbsp;<figure class="image image_resized" style="width:51%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000059751/design/2023-11-08_bf7762b4a9d2f.jpeg"></figure></td></tr></tbody></table></figure>&nbsp;Additionally, the base is designed with openings to reduce filament usage and provide better ventilation for the LED strip.&nbsp;I also created a diffuser with guides for easy attachment to the base.&nbsp;Finally, I included two end caps: one with a hole to pass cables to an external controller and one to completely close the opposite end.&nbsp;Printing:&nbsp;There are no specific requirements for printing the base. If your LED strip tends to overheat, I strongly recommend using a high-strength filament like ABS, ASA, or PETG. However, PLA will work well in most cases. No support is required.&nbsp;Regarding the diffusers, I recommend printing them in white (avoid transparent materials as the LEDs will be visible otherwise).&nbsp;Since they are printed with the bottom side being visible, it might be a good idea to use a textured print bed to achieve a better finish (check pictures). However, the most important aspect is to ensure that the side in contact with the print bed is perfect, without any roughness or adhesive residues.&nbsp;Formats:&nbsp;If needed, I may release the source file to make it fully parametric. For now, you can choose between two common formats:<ul><li>LED strip approximately 9 mm wide</li><li>LED strip approximately 12 mm wide</li><li>LED strip (COB) approximately 8 mm wide</li></ul>9 and 12 formats fit a 15.8 mm wide base while the 8mm has a 12mm one.&nbsp;I included also different lengths to be printed in almost any printer (150mm and 250mm), if you need intermediate length just cut it.&nbsp;Remember to get the same led size for each component, a diffuser for 9mm strip doesn&#39;t fit in the 12mm base.&nbsp;If you need different sizes, feel free to ask!&nbsp;I hope this model proves useful for your projects. Happy printing!

LED Strip Holder - Diffuser - Accessories

lighting

franceschellifederico

NOTE: Use my profile and please do not change the print profile settings if you want to get a perfect result! The layers are adaptive and the speed of the external wall is reduced to obtain a wonderful lucidity effect :)&nbsp;Embrace simplicity and contemporary elegance with this meticulously crafted lowpoly vase design. Its minimalist aesthetic seamlessly blends modern artistry with functional design. Carefully sculpted edges and clean lines define its silhouette, offering a striking visual appeal that enhances any space. Add a touch of sophistication to your décor with this unique, artful vase, perfect for showcasing your favorite blooms or standing proudly as a standalone piece. Elevate your surroundings with this fusion of simplicity and modernity.

Low Poly Vase

plants

友爱的海苔

泰坦陨落离子

VG models

Emoticon

Note: This version is threaded for common imperial ¼"-20tpi screws. I have uploaded a modified version threaded for Metric M6x1 hardware for use with fiber lasers and metric threaded tables which can be found here: <a target="_blank" href="https://makerworld.com/en/models/193981#profileId-214449" rel="nofollow noopener">"Renzetti Style" Connectible 1-2-3 Blocks v2.0 \ Setup Blocks (M6x1 threaded version) by Emoticon - MakerWorld</a> These are machinist 1-2-3 blocks, but they have 1001 uses for all sorts of fixtures, jigs and now with threaded holes they can easily be connected together like a building set to make whatever you want. 3D printed 1-2-3 blocks are better than no 1-2-3 blocks and 3D printed Renzetti style ones are even better. The outside dimensions are 1"x2"x3" the holes are threaded and chamfered to accept ¼-20 cap screws, but button head ¼-20 machine screws will work as well. These could also be great as a “purge to model” print to make when making other things or just running out the end of a spool. I designed them after seeing this video here where OxToolCo shows off making his own and credits the original inventor, Robin Renzetti. You can see the video showing off their use here:<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=FxVPM08jnGM"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/FxVPM08jnGM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

"Renzetti Style" Connectible 1-2-3 Blocks v2.0 \ Setup Blocks (1/4"-20 threaded version)

tools

Markharris1989

Now you can print piles of cubes and break them free!&nbsp;Reduce your purge/poop and print something helpful for schools!The idea of these cubes is not to print them alone (but you can if you want) but to use to flush into when producing multicolour prints. Once they are printed donate them to your local school, I am sure they will love them!&nbsp;I have added a sacrifical layer that allows the cubes to be seperated and I have made stacks of cubes up to the maximum height.&nbsp;To Use:1. Once you have your object that you want in colour on your build plate inset a pile of cubes that roughly match the height of your print. 2. Paint supports underneath the cube pegs, turn on supports and set type to ‘Tree (Manual)’<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/462472/2024-01-28_fc79f0b6ec23b.png"></figure>3. Go to Process, Objects, Select the Cube, Others and select ‘flush to object’ and ‘flush to object infill’<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/462472/2024-01-28_f27bb1de30594.png"></figure>4. Set Thick Bridges to ‘On’<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/462472/2024-01-28_9412335ba22cb.png"></figure>5. Change bridge speed to ‘25’ (this isn't technically needed, but it should increase the cleanliness of your bridges.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/462472/2024-01-28_711be29bdd9a3.png"></figure>6. Slice the file with 'Preview' and have a look at the ‘Flush’ value, it will have decreased (Note: you can ignore any warnings, these only occur because there is a gap to allow the blocks to be stacked)7. Right click and Clone the Cubes, everyone you add will decrease the purge value (Note: you will see some increase in the total filament used, only keep adding cubes to the point that you are comfortable to use)8. Print your file, seperate the cubes and donate them to a good cause (or build a fort with them!). Use something thin and strong and push through the sacricial middle part to split the cubes.<figure class="image image_resized" style="width:64.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/462472/2024-01-28_18c951940f259.jpeg"></figure>If you have any questions at all please let me know. This is my little project to improve 3D printing and attempt to make the world a better place!

Linking Purge Cubes V2. Now With Stacks Of Single Cubes! For Use As Manipulative In Education

print flushing

Oclure

mount for your DeWalt 20v XR jig saw for wall control pegboard systems&nbsp;this is a centerpiece i made to fit the DDD wall control accessories system made by Allen Dersha his project can be found at <a target="_blank" href="https://github.com/aderusha/DDD-Printable-Wall-Control-System" rel="nofollow noopener">https://github.com/aderusha/DDD-Printable-Wall-Control-System</a> and<a target="_blank" href="https://www.printables.com/model/52618-ddd-printable-wall-control-system" rel="nofollow noopener">https://www.printables.com/model/52618-ddd-printable-wall-control-system</a>&nbsp;the rest of my accessories I've designed for the system can be found here <a target="_blank" href="https://makerworld.com/en/u/2234273742/collections/102156" rel="nofollow noopener">https://makerworld.com/en/u/2234273742/collections/102156</a>&nbsp;the following parts from Allens project were used in mounting this model to my pegboard- 3x2 Angle Bracket Flat Left- 3x2 Angle Bracket Flat Left- 3x4 Locking Spacer- 8mm lock pin x 2&nbsp;

DeWalt Jig Saw Wall Control Mount

pegboard 

Stamatis Sarlis

A spacious desk organizer for your office.Note if you have bed adhesion issues please add a brim to the print profile.Note 2: You can adjust how tight will the parts by slighting unscrew the cylinder<ul><li>Print all plates</li><li>Screw the cylinder on the base</li><li>Put the two storage layers on top of the base through the cylinder</li><li>Press fit the top part on the cylinder</li><li>Ready!</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/410594/2024-01-16_4b509fcf8d888.gif"></figure>

Rotating spacious Desktop Organizer

desk

cartyski

Add a playful twist to your marker with the Sharpie Sword Cap!

Sharpie Sword Cap

Funny

MIPI3D

🎨 Transform Your Walls with Triptych Wall Art Trio! 🖼️✨&nbsp;Key Features:&nbsp;🔷 Dynamic Triptych Design: Immerse your living space in artistry with our set of 3 wall art pieces. The trio's harmonious connection creates a captivating visual story that unfolds seamlessly across your walls.&nbsp;🌈 Versatile Configurations: Explore various arrangements as each piece can be positioned independently, giving you the creative freedom to design a unique and personalized wall display that suits your style.&nbsp;🏡 Easy Installation: Designed for convenience, these wall art pieces are easy to print and assemble, ensuring a hassle-free process from creation to display.How to Showcase:<ol><li>🌐 Explore our Triptych Wall Art Collection.</li><li>🖨️ Download the STL files for your preferred pieces.</li><li>🎨 Print using your 3D printer in colors that resonate with your decor.</li><li>🛠️ Assemble and arrange the pieces to create a stunning triptych display on your walls.</li></ol>&nbsp;Redesign your living space with the captivating beauty of our Triptych Wall Art Trio. 🖼️✨ &nbsp;Download the STL files today and let your walls tell a unique visual tale! #TriptychArt #3DPrintedDecor #WallArtMastery

Wall Art - triple piece sets

wall art

altair3d

DesignI needed something to show pricing at the craft fairs I've been attending. I thought it only appropriate that those price tags be printed (just like the rest of my products). They're simple, but very effective. The magnetic tags take 8x2mm magnets and may require a touch of super glue to keep them in.&nbsp;ChatGPT DescriptionThe 3D printed Craft Fair Price Kit is a compact, customizable tool designed to streamline pricing and inventory management for artisans at craft fairs. Crafted with durable, eco-friendly PLA filament, this kit includes an assortment of labeled price tags, numerical placeholders, and product category markers. The kit's sleek, minimalist aesthetic seamlessly integrates with diverse craft displays, offering a professional and organized approach to showcasing handmade goods while simplifying the pricing process for both vendors and customers.&nbsp;&nbsp;

Craft Fair Price Kit

amanda

GrafXP

<h2>Modular Rack System for Gridfinity Drawers</h2>This is a completely modular customizable rack system for gridfinity drawers.&nbsp;Please scroll down to find the list of all available models and links to the download pages.&nbsp;The system currently consist of three types of elements. Elements for a single rack tower, elements for a double rack tower and elements for a customizable rack multi tower / drawer wall.&nbsp;All elements are housing drawers with space for a 5x5 gridfinity base plate and are currently available in the following heights:3U, 4U, 6U, 8U and 10U.&nbsp;A xU drawer can fit standard xU gridfinity boxes.&nbsp;The side, back and connector elements contain dove tail connectors with friction fitting.To connect and disconnect them, a little bit of force is needed. I found that lightly tapping with the back of a scredriver does the trick.To connect the elements vertically, connection pins have to be printed.The top of a rack tower can be finalized with the modular top lid elements. To connect these lid elements, screw in connection pins are provided.&nbsp;Every element can be printed on a Bambu Lab X1C or P1P/S build plate (256x256).&nbsp;I drew a lot of inspiration from the FOSBOS and BaBo systems, but I wanted to create a system that would not need screws or glue and could be reconfigured at any time.<h3>Print settings</h3>Every element has its own print profile (follow the links below) with the following settings included:<figure class="table" style="width: 56.4%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Layer height</td><td>0.2</td></tr><tr><td>Walls</td><td>4</td></tr><tr><td>Material</td><td>Structural Parts (PLA+, ABS etc.)  Connection Pins / Screw in Pins (PETG)</td></tr><tr><td>Infill</td><td>15 %</td></tr></tbody></table></figure><h3>Connection Test</h3>If you are unsure about the calibration of your printer, you can use the following test print.&nbsp;<figure class="table" style="width: 31.6%"><table class="ck-table-resized"><colgroup><col></colgroup><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2024-01-13_06fc36b103019.png"></figure><a target="_blank" href="https://makerworld.com/en/models/134987" rel="nofollow noopener">Connection Test</a></td></tr></tbody></table></figure><h3>Dove tail connections to tight?</h3>If your Bambu lab printer (or any other 3d printer) prints the dove tail connections to tight, you can try one of the following suggestions by users that were successfull:<ul><li>User bvogl changed the settings (Bambu Lab / Orca Slicer) in Quality → Precision (X-Y hole compensation and X-Y contour compensation) to make the dove tail connections slightly less tight.</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2024-06-03_3aeebd2707a1d.png"></figure><ul><li>One user reduced the flow rate of the material by 7%, which led to the dove tail connectors fitting nicely.</li><li>Make sure to run the flow dynamics and flow rate calibrations for your chosen filament to get the required tightness.</li></ul><h3>Overview</h3><figure class="table" style="width: 86.17%"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td><h3>Single Tower</h3><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_e01d718c823f.png"></figure></td><td><h3>Double Tower</h3><img class="image_resized" style="width: 100%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_c67869ec30151.png"></td><td> <h3>Customizable Multi Tower</h3>Please download the STEP file to get all parts.<figure class="image image_resized" style="width: 84.18%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_78a40b312a80d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_edd164e3dcd6f.png"></figure><a target="_blank" href="https://makerworld.com/de/models/84388" rel="nofollow noopener">5x5x3U</a>254mm x 256mm x 33mm</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_2c343b472c0cb.png"></figure><a target="_blank" href="https://makerworld.com/de/models/110751" rel="nofollow noopener">5x5x3U</a>490mm x 256mm x 33mm</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_8a78ae8dd53b1.png"></figure>5x5x3U</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_55b6dce44f955.png"></figure><a target="_blank" href="https://makerworld.com/de/models/87380" rel="nofollow noopener">5x5x4U</a>254mm x 256mm x 40mm</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_fb757f49d8ac3.png"></figure><a target="_blank" href="https://makerworld.com/de/models/110781" rel="nofollow noopener">5x5x4U</a>490mm x 256mm x 40mm</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_6238d5bbb41b8.png"></figure>5x5x4U</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_1d0b47626731.png"></figure><a target="_blank" href="https://makerworld.com/de/models/87382" rel="nofollow noopener">5x5x6U</a>254mm x 256mm x 54mm</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_3947b3d4de8.png"></figure><a target="_blank" href="https://makerworld.com/de/models/110791" rel="nofollow noopener">5x5x6U</a>490mm x 256mm x 54mm</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_e91f9bc384fc8.png"></figure>5x5x6U</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_591bd9f03c6ee.png"></figure><a target="_blank" href="https://makerworld.com/de/models/87383" rel="nofollow noopener">5x5x8U</a>254mm x 256mm x 68mm</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_ff333f2cf79a3.png"></figure><a target="_blank" href="https://makerworld.com/de/models/110817" rel="nofollow noopener">5x5x8U</a>490mm x 256mm x 68mm</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_9ce4e42f0bcf1.png"></figure>5x5x8U</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_54de9ddc754e7.png"></figure><a target="_blank" href="https://makerworld.com/de/models/87384" rel="nofollow noopener">5x5x10U</a>254mm x 256mm x 82mm</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_1695666dcbb0d.png"></figure><a target="_blank" href="https://makerworld.com/de/models/110823" rel="nofollow noopener">5x5x10U</a>490mm x 256mm x 82mm</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_994a691dcc7cd.png"></figure>5x5x10U</td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_da082adf8555a.png"></figure><a target="_blank" href="https://makerworld.com/de/models/87385" rel="nofollow noopener">Lid</a>254mm x 256mm x 10mm</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_a371eb43475a6.png"></figure><a target="_blank" href="https://makerworld.com/de/models/110831" rel="nofollow noopener">Lid</a>490mm x 256mm x 10mm</td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000085205/design/2023-12-28_02c666d9d2951.png"></figure>Lid</td></tr></tbody></table></figure>&nbsp;

Modular Rack System for Gridfinity - Overview

Gridfinity

QuackDocta

Clothes Hanger I designed to allow me to store my pants on a hanger in a compact way. Not a new concept but why buy a 20 dollar product when you can instead spend hours designing, prototyping and printing something yourself? Design assembles with no hardware required. I've found that PLA 5 Wall Loops 15% infill suffices.

Tiered Clothes Hanger

travel

Meister Edel

HeyhoBefore you print these parts I have to say in advance: I only printed the Version Dyson_Medium. I created all the other parts only if they fit your situation and I cant tell how good they will do their job ,-)To understand all the parts:Version Long: Fits all Adapters. Even if you screw the Mount directly to the wall.Version Medium: Fits most of the adapters. But some will be too close to the wall if you dont screw them additionally to a piece of wood.Version Short: Is like the medium one but even shorter. So you need a bigger piece between the wall and the mount to guarantee a good fit. But needs less plastic.I created a Top and Bottom version of all these Mounts. This is if you only need one adapter. But they arent as stable as the normal versions, because they have only 1 screw to hold them in place.Have fun and keep printin ;_)&nbsp;Update 2022: Added a version for the dyson slim parts. (I dont have one so it doesnt fit 100% but it works :))&nbsp;<h3>Print Settings</h3>Printer Brand:Prusa&nbsp;Printer:I3 MK3SRafts:&nbsp;No&nbsp;Supports:Doesn't MatterResolution:&nbsp;200&nbsp;Infill:15 Filament: DC Plastics PLA Schärri&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Category: Organization

Dyson Acessory Holder Mount "Simple" Design

Household 

CreativeRenditions

Spice up your holiday decorations with these festive presents. The model was created to allow for the individual components to be printed separately. No AMS needed. The main ribbon slides right into the box and the remaining components stack ontop followed by the ball/pin to hold everything together. The Ball/pin included in the print profile is tight and requires a little force to snap into place. If the tolerance is too tight, a second looser version is on the build plate that can be used with superglue to hold everything together. Happy Holidays!&nbsp;If you would like to use the physical prints for commercial purposes or would like to support me please visit my Patreon. Commercial License subscription can be found there. <a target="_blank" href="https://www.patreon.com/CreativeRenditions" rel="nofollow noopener">https://www.patreon.com/CreativeRenditions</a>

Christmas Present Mult-Piece no AMS Needed

Christmas 

Nico

<h2>PixelCase ~ iPhone 15 pro case</h2><h3>Support the designer:</h3><ul><li>Donate Bitcoin here: bc1q9mhh7l53mmlnqqmazdnr6gele0smrzkunclfvj</li><li>Donate Ethereum here: 0x36CA6EEF3700ff18858f195706C5E3A9d6458241</li></ul>&nbsp;This phone case is designed for you to create your own pixel art designs on the back of your phone's case. This design also has really super clicky buttons even for the action button, which other cases don't have. There's also a version of this print that supports magsafe with a cutout for an additional magnet ring.&nbsp;This design profile page includes 2 options:<ul><li>No magsafe design: simpler to print but won't support magsafe accessories. Pixels are thicker and easier to handle.</li><li>Magsafe design: a few extra steps to print and assemble but supports magsafe accessories.</li></ul>&nbsp;If you're looking for an even simpler print with a neat design, check out <a target="_blank" href="https://makerworld.com/en/models/56125#profileId-57712" rel="nofollow noopener">my other design here</a>.<h3>The print is split in 4 parts:</h3><ul><li>phone case</li><li>camera bump protector: this is split from the case so that its easier to print both on flat surfaces without support for a smooth finish.</li><li>buttons (volume x2, action button and power button)</li><li>pixels: these can be print in any color to create your pixel art.</li><li>(optional 1): pixel fillers if you're printing the magasafe version.</li><li>(optional 2): a protective TPU sheet that goes between your phone and the pixels to protect the phone even more.</li></ul><h3>How to print:</h3><ul><li>TPU 95: a strong flexible filament is required for the case</li><li>Camera bump guard can be print in TPU or PLA.</li><li>Buttons also printable on PLA or TPU.</li><li>Some supports on the case. Mainly the buttons andthe speaker grill and charge port. Minimal tree supports recommended.</li><li>Raft needed for the pixels to improve bed adhesion</li><li>Protective sheet needs to be printed on TPU.</li><li>Added 1 pixels type which has a -0.2 tolerance on the bigger side (that fits in the case). This one with a little tolerance works better for me.</li><li>I recommend 15% infill for the case.</li></ul>&nbsp;Some pixel art ideas here: <a target="_blank" href="https://www.brik.co/pages/gallery-search?q.size.height.max=15&q.size.width.max=11" rel="nofollow noopener">https://www.brik.co/pages/gallery-search?q.size.height.max=15&q.size.width.max=11</a>&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/234491/2023-10-29_193633496f9628.png"><h4> </h4><h3> </h3><h3>Assembly:</h3><ul><li>insert the camera bump guard first in the right direction</li><li>insert pixels with the desired pattern</li><li>(optional) lay over a protective sheet of TPU (STL/3MF also uploaded) over the pixels on the inner side of the case to add extra protection to your phone.</li><li>Insert the buttons on each of the sides.</li><li>for the magsafe cutout to work you will need a strong extra ring magnet that you also need to add before the phone. Or slap it in the phone and it should settle in the cutout nicely. You will also need to print pixel stoppers of which there's 2 options:<ul><li>individual stoppers. These are 1mm thick stoppers for each pixel outside the magsafe cutout.</li><li>grouped stoppers. There's 2 of these one for inside the magsafe ring and one for the outside.</li></ul></li><li>finally insert your phone!</li></ul>&nbsp;<h4>Comments about magsafe:</h4>You can also print the “no magsafe option” and avoid thinking about this next section altogether.&nbsp;The magsafe print profile and files use different pixels. These pixels are thinner (1mm in thickness). This is so that the additional magsafe magnetic ring which is usually around 0.4mm to 1mm thick can sit in between the pixels and the phone. Its also so that the magnets attach firmly to other accessories.&nbsp;here are some pictures that illustrate it:&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/234491/2023-11-27_0ff184e94b7978.png"><img src="https://makerworld.bblmw.com/makerworld/draft/234491/2023-11-27_68b82dac695198.png">&nbsp;In order to prevent the pixels from falling back into that 1mm gap in places where there isn't an extra magnetic ring. You also need to print 1mm pixel stoppers that fill that gap here illustrated in grey:&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/234491/2023-11-27_613c94011fbaa.png">&nbsp;<h3>Requests:</h3>if you’d like one for your phone model, drop me a comment!&nbsp;Also please make sure to share your design :).&nbsp;<h3>Change log:</h3><ul><li>2023/11/03 - Added a longer overhang on the face of the phone for tighter grip and speaker grill holes</li><li>2023/11/05 - Added extra padding on buttons and a fillet on the overhang around the phone to reduce stringing</li><li>2023/11/08 - More tolerance around action buttons and deeper button trenches around the button</li><li>2023/11/10 - pulled back 1mm off the top boarder and smoothened it out so that it doesn't interfere with the screen gestures off the sides.</li><li>2023/11/11 - added chamfers to the edges of the case to make the print bulging proof and a better design altogether. Also added a channel to add an extra magsafe ring you can get on amazon or aliexpress with an inner diameter of 43mm and outer diameter of 48mm max.</li><li>2023/11/15: improved placing of camera bump cutout and a fillet that makes the camera bump flush with the phone.</li><li>2023/11/18: Improved buttons by making them separate from the case. This makes them more clickable, customizable and easier to print.</li><li>2023/11/27: added a new slimmer design for the magsafe option with new pixels and case design.</li><li>2023/12/04: added a new method of pixel stoppers that is much easier to use. All pixel stoppers are printed in a 0.2 mm sheet.</li></ul>

iPhone 15 pro case customizable

phones

MakerWorld

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/281253/2023-09-20_ca373507d148d.png"></figure>This 3D printed version of the tank strives to replicate the authentic details in terms of appearance, including intricate undercarriage details. It features a rotatable and elevating turret, three accessible hatches, rotating wheels and tracks, as well as a suspension system with articulated movement. Through careful disassembly, arrangement of components, and the addition of auxiliary structures, all parts can be printed without the need for supports. Furthermore, the openable chassis design preserves the potential for future internal structural DIY work.&nbsp;Parts count: 157Estimated build time: 1hTools: CA Glue-medium, hand drill, pen knife, sand paper&nbsp;More Details version print profileRecommended filaments:Bambu PLA Matte Desert Tan (11401)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043</a>&nbsp;Bmabu PLA Matte Latte Brown(11800)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035</a>&nbsp;Bambu PLA-CF Lava Gray(14101)<a target="_blank" href="https://store.bambulab.com/products/pla-cf?variant=40828231581811" rel="nofollow noopener">https://store.bambulab.com/products/pla-cf?variant=40828231581811</a>&nbsp;Hotend: 0.2mm Stainless Steel & 0.4mm Hardened SteelPrint time: 50.8h&nbsp;&nbsp;&nbsp;Time Saving version print profileRecommended filaments:Bambu PLA Matte Desert Tan (11401)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043</a>&nbsp;Bambu PLA Matte Latte Brown(11800)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035</a>&nbsp;Bambu PLA-CF Lava Gray(14101)<a target="_blank" href="https://store.bambulab.com/products/pla-cf?variant=40828231581811" rel="nofollow noopener">https://store.bambulab.com/products/pla-cf?variant=40828231581811</a>&nbsp;Hotend: 0.4mm Hardened SteelPrint time: 13.9h&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures when printing small parts&nbsp;Follow the Assembly Guide below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.

Panzerkampfwagen IV Tank

Army

ryanlakey1

pi case which encaptulates the cables so they cant fall out and hs space for fan.

pi case with power and HDMI encaptulated

Raspberry Pi

shoooo

Holes are designed for screwing together with M4 bolts (threads not modelled, should adequately hold in the 3.5mm holes) or can just be glued together with CA glue.Cam lobe tires work great printed with TPU for friction, but a version with the cam lobe in full is also attached (may need some electrical tape or similar to provide enough friction for engaging the cam).

Saw and thin tool holder with French cleat backer

French Cleat

TallackMedia

This Gridfinity Bearing holder fits in a 1x2 space and holds up to 12 608ZZ bearings. The bearings fit snugly in place for easy transport. &nbsp;There are two versions in this bundle, a 3u version and a 6u version that's stackable. &nbsp;Check out my other models for a different version that holds 15 bearings but doesn't hold them in place.&nbsp;Based on the Gridfinity organization system by Zach Freedman

Gridfinity 608ZZ Bearing Holder - 12 Bearings

Gridfinity Parts Bins

KYZ Design

Update 17/09/2023<ul><li>Added “HSW Ez-V1 Round Object Holder - 65mm Left”</li></ul>Update 29/04/2023<ul><li>Added “Ez-V1” and “Ez-V2" hooks (14 files) which supersedes all other versions. These have been completely remodeled for improved strength, easier bed adhesion for ABS/ASA, more secure fit with easier clipping, less side-to-side movement when installed and a cleaner look.</li><li>Added 2 base clips for remixing.</li></ul>Update 24/04/2023<ul><li>HSW Simple Hook 50mm Type 1 v1.1 added - stronger vertical section</li><li>3 “Ez” hooks added for easier install - these work better for PLA wall pieces, and the firm ones work better for PETG wall pieces.</li></ul>---I wasn't happy with the current hook designs as the layer direction was always sub-optimal, seemed wasteful and they do not hook on securely. Here are some easy print strong designs. No screws or supports needed and no need to print separate pieces to be able to mount them.You will need good first layer adhesion - clean your build plate and get your first layer squish right or use a brim if you are using a warp-y material.Print setting recommendations:Material: PLA, PETG, ABS, ASA (PETG hooks will be a little less secure due to the reduced stiffness)Temperature: print on the hotter end of your material's temp range, the overhangs are 45 deg at most so it should print fine0.4mm nozzle, 0.25mm all layer heights2 walls, 30% grid infillIf you have issues with fitment, you can try scaling it in only the "vertical" direction by adding or removing 1% or 2% (vertical direction when installed, not when lying flat) to give the detents more or less bite. Alternatively, try printing outer walls first for better dimensional accuracy.Installation and removal:Install like a pegboard hook - get the top in first, then the bottom.Remove by pushing up on the hook.Make sure you install your Honeycomb the right way around! It seems to be a very common mistake. The thicker part of the honeycomb faces YOU. These hooks will not fit properly if you have your honeycomb the wrong way around. I made a diagram to clarify:<figure class="image image_resized" style="width:53.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/131755/2023-09-25_nppzjja4u8d4.png"></figure>Check out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/18964" rel="nofollow noopener">this collection</a> for my other Honeycomb Storage Wall models andcheck out <a target="_blank" href="https://makerworld.com/en/u/11128021/collections/26498" rel="nofollow noopener">this collection</a> for my Gridfinity models.&nbsp;To support me, simply share my models :)&nbsp;

Easy Print Super Strong Hook - Single Piece - No Screws - No Supports - HSW Honeycomb Storage Wall

BuildyBryce

Turn your ████ bricks into keycaps!Compatible with MX style switches, tested with Outemu switches.<h3>Styles:</h3><ul><li>2x2<ul><li>Regular Size</li><li>Small Size (For some off-brand bricks, use this if the regular size is too big)</li></ul></li><li>3x2<ul><li>Centre Stem</li><li>3.5mm Offset Stem</li><li>5.5mm Offset Stem</li></ul></li><li>4x2<ul><li>Single Stem</li><li>Triple Stem</li></ul></li><li>DIY<ul><li>2x2 Base</li><li>3x2 Base</li><li>4x2 Base</li><li>Stem</li></ul></li></ul><h3>Instructions:</h3><ol><li>3D Print Brickcaps.</li><li>Remove the inner plastic from your construction bricks.<ul><li><img src="https://media.printables.com/media/prints/551716/rich_content/ccfeb92a-4f2c-4f2d-a06a-920137aec4b3/removingplastic.gif#%7B%22uuid%22%3A%22f473edaf-fb6b-431d-a6e8-617bc67ff761%22%2C%22w%22%3A360%2C%22h%22%3A360%7D"></li></ul></li><li>Insert Brickcaps into your construction bricks.<ul><li><img src="https://media.printables.com/media/prints/551716/rich_content/19fe4cb8-a815-4ff1-ae87-9f78c5085b19/insertingadapter.gif#%7B%22uuid%22%3A%2238b2c7d2-31a4-4ade-bda4-ac8377c3cc3a%22%2C%22w%22%3A450%2C%22h%22%3A450%7D"></li></ul></li><li>Glue (optional).</li><li>Place Brickcaps onto your keyboard.<ul><li><img src="https://media.printables.com/media/prints/551716/rich_content/7d2385ad-7b40-4dd9-b0ec-347e3b784103/addingkeycaps.gif#%7B%22uuid%22%3A%22f4e8dc2a-bbcb-4eeb-b887-8df1a7478aa4%22%2C%22w%22%3A338%2C%22h%22%3A338%7D"></li></ul></li><li>Upload your makes - I'd love to see them! I also made a video about it: </li></ol><figure class="media"><div data-oembed-url="https://youtu.be/ZndYzuFG4ME"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/ZndYzuFG4ME" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Brickcaps - Brick to Keycap Adapters

Keyboard 

Jenson.hainke

Ich habe mir hier einen Organizer konstruiert der auf die Bambu Lab Leer Spule Passt. (Enthalten sind 7 Spulen Organizer von 2 Fächern Bis 8 Fächern )--------------------------------I constructed an organizer that fits on the Bambu Lab empty spool.(Included are 7 spool organizers from 2 compartments to 8 compartments)&nbsp;

Bambu Lab Spool Organizer

Spool Upcycle

Dieter W

Inspiriert von <a target="_blank" href="https://www.printables.com/de/model/213175-spray-bottle-wall-hanger" rel="nofollow noopener">DJMac</a>, habe ich selber eine 4 fach Halterung erstellt. Gedruckt in PLA 0.4 Düse und 0.28 layer höch, ohne Support und Brim.&nbsp;Variante 2: Für eine bessere Stabilität habe ich die Dicke der Rückseite um 1 mm erhöht.&nbsp;__________________________________________________&nbsp;Inspired by <a target="_blank" href="https://www.printables.com/de/model/213175-spray-bottle-wall-hanger" rel="nofollow noopener">DJMac</a>, I created a 4-way mount myself. Printed in PLA 0.4 nozzle and 0.28 layer high, without support and brim.&nbsp;Version 2: I increased the thickness of the back by 1 mm for better stability.&nbsp;Quality Layer height - 0.28 Only one wall on top surfaces - not applied Strength Wall loops - 3 Sparse infill density - 10% Others Brim type - No-brim

Spray holder

kitchen 

JamesThePrinter

This roll top box includes 2 optional containers that mount to each side. If you choose to add one or two side containers, a connector will be needed for each. Both side containers can be used on either side of the roll top box.&nbsp;<h5>Print Settings</h5>No special settings are needed. &nbsp;<h5>Assembly Instructions</h5>Slide the roller into the groove on one of the roll top box pieces. Add a small amount of glue in the 2 holes and the slot of the right piece. Slide the left and right pieces together - be sure that the roller seats into the groove.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/1360890085/draft/2023-09-15_8gzvx9mj3zyy.png"></figure>***Optional***Slide connectors into each side of the roll top box. If desired, glue in place.Slide the side containers in place.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/1360890085/draft/2023-09-15_tkc0c75jkgtm.png"></figure>&nbsp;&nbsp;<a href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:<ul><li>Inland Lulz Green Matte PLA</li><li>Inland Blue Tough PLA</li><li>Inland Pink Tough PLA</li></ul>

Roll Top Storage

Containers

kerngebiet

Universal holder for any cordless drills and tools. I used it mainly for Makita, but other power tools should fit as well of course.The following Makita tools have been tested so far in the 40mm version:<ul><li><a target="_blank" href="https://amzn.to/43EvbGk" rel="nofollow noopener">Makita DTD171</a></li><li><a target="_blank" href="https://amzn.to/418LxoO" rel="nofollow noopener">Makita DDF484</a></li><li><a target="_blank" href="https://amzn.to/3KH0RSL" rel="nofollow noopener">Makita DDF484B</a></li><li><a target="_blank" href="https://amzn.to/3KKXTMS" rel="nofollow noopener">Makita DHP484</a></li><li><a target="_blank" href="https://amzn.to/3L1Jk99" rel="nofollow noopener">Makita DDF459</a></li><li><a target="_blank" href="https://amzn.to/41iBQUT" rel="nofollow noopener">Makita DHP481</a></li><li><a target="_blank" href="https://amzn.to/3GNdGK7" rel="nofollow noopener">Makita DTW300</a></li><li><a target="_blank" href="https://amzn.to/3UJI2D4" rel="nofollow noopener">Makita DTW302</a></li><li><a target="_blank" href="https://amzn.to/3ojGUKh" rel="nofollow noopener">Makita DHG180</a></li><li><a target="_blank" href="https://amzn.to/3obRMJP" rel="nofollow noopener">Makita DHG181</a></li><li><a target="_blank" href="https://amzn.to/46xfsJ9" rel="nofollow noopener">Festool T18+3</a></li><li><a target="_blank" href="https://amzn.to/40VRPc2" rel="nofollow noopener">Milwaukee 2553 M12 Fuel</a> **</li><li><a target="_blank" href="https://amzn.to/3TgM9rB" rel="nofollow noopener">Milwaukee 2504 M12 Fuel</a> **</li><li><a target="_blank" href="https://amzn.to/3RqUbNf" rel="nofollow noopener">DeWalt DCE530</a> **</li><li><a target="_blank" href="https://amzn.to/40XWAlF" rel="nofollow noopener">DeWalt DCD771</a> ** (seems also to fit in 35mm)</li><li><a target="_blank" href="https://amzn.to/3Gijfj2" rel="nofollow noopener">DeWalt DCF887</a> ** (seems also to fit in 35mm)</li><li>DeWalt DCF885 ** (seems also to fit in 35mm)</li><li>DeWalt DCD985 **</li><li><a target="_blank" href="https://amzn.to/40W9IHO" rel="nofollow noopener">Surebonder Ultra DT-3100FAMZS</a> **</li><li>Porter Cable PCC601</li><li>Porter Cable PCC641</li></ul>The 35mm version fits good for:<ul><li><a target="_blank" href="https://amzn.to/3L8u4HD" rel="nofollow noopener">Makita DDF487</a></li><li><a target="_blank" href="https://amzn.to/41BBmsN" rel="nofollow noopener">Makita DHP487</a></li><li><a target="_blank" href="https://amzn.to/3sUPVMj" rel="nofollow noopener">DeWalt DCD778</a> **</li></ul>The wide version fits:<ul><li><a target="_blank" href="https://amzn.to/46goMlB" rel="nofollow noopener">Makita DWT700</a> **</li><li><a target="_blank" href="https://amzn.to/46eql3g" rel="nofollow noopener">Makita DWT701</a> **</li><li>Ryobi PBLIW01 **</li></ul>Smaller tools will probably better fit in the smaller holder with a 35mm cut-out. If someone needs a different measurement, feel free to leave a comment, I'll see if I can implement this.<h3>Printing</h3>Very easy, no supports needed if printed standing. I used PETG for my prints and three walls with 20% infill. This is very solid. If you want, you can print it with 100% infill and get it even stiffer. But you will need ~220g of filament for this. ;)<h3>Update 04.05.2023</h3>I've added another design for the holder, based on the idea of <a target="_blank" href="https://www.printables.com/@mnemic" rel="nofollow noopener">@mnemic</a>. I has the same sizes as the other, but saves even more filament.<h3>Update 06.10.2023</h3>I've added a wider version of the holder, for Tools like the <a target="_blank" href="https://amzn.to/46goMlB" rel="nofollow noopener">DWT700</a> or <a target="_blank" href="https://amzn.to/46eql3g" rel="nofollow noopener">DWT701</a>. This version is identical to the 40mm default version. Only difference is, that that the inner width is 81mm instead of 70mm.&nbsp;* = Amazon Affiliate Links ** = Information from users who printed the model

Universal cordless Drill Holder/Mount (Makita, DeWalt, Bosch, Festool, ...)

Tool Holding

Adam L

Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove my design is original from scratch and not a “remix” of that model. It is only a remix of my OWN model. I do respect licenses of others. Note to everyone else: Now includes Fusion360 Model (because reasons.. ) !&nbsp;Some people suggested that they would prefer to use a toothbrush or brass bristle brush to clean their threads instead of the parent <a href="https://www.printables.com/model/476890-super-screw-scrubber-a-sensational-solution-for-sp/remixes" rel="nofollow">Super Screw Scrubber </a>design with paper towel. For them, I've designed this alternative version of the scrubber that lets you slap on a cut-off toothbrush or brass bristle brush or similar and glue it onto the guide. This simple but effective modification lets you get a deeper clean with a longer reach!This version is the more reliable tapered version from the parent that should reduce any first layer print issues. Since the brush bristles are the key to cleaning in this version, the exact tightness of the threads is less important.<h4>Versions</h4><ul><li>DefaultSize (Recommended)</li><li>ShortBrush - if you have a brush that's not quite long enough to comfortably reach, this offers a closer spacing of the flat part to the lead screw by ~ 4 mm. </li></ul>&nbsp;<h3>Print Instructions (same as parent)</h3><ul><li>Print at high layer resolution, I recommend 0.1 or 0.08 if possible on your printer, so that the threads fit nicely. There are slight tolerances built into the thread design so that it should clamp nicely.</li><li>Most filaments should be fine.. but I would avoid anything like carbon fiber or glow in the dark filament to avoid any scratching of the screws (though most are made of steel that probably would not scratch anyways).</li><li>Orient the flat side down. I designed the part slightly asymmetrically so this is intentionally hard to screw up when placing on your bed :).</li></ul><h3>Use instructions </h3><ul><li>Find an old toothbrush or brass bristle brush, cut off the head. Use hot glue (recommended) or some other suitable glue to attach the head to the flat section as shown in the pictures.</li><li>Attach the clamp and brush to your lead screws as shown.. run the bed up and down (make the screws rotate), and hold the clamp in place as you do so.</li><li>Remove the widget, and clean the gunk off (can just rinse with IPA and/or acetone for most greases).</li><li>Re-grease your threads if you stripped all the grease off.</li></ul>&nbsp;<ul><li>Don't use as a regular toothbrush anymore, the ADA has informed me this is not an approved dental product after this modification :). <img src="https://media.printables.com/media/prints/477870/rich_content/50fb1bab-9bd4-4c1c-b9c8-59d26d9d371c/image.png#%7B%22uuid%22%3A%222da5821e-19c2-4860-832f-116d5b83b985%22%2C%22w%22%3A652%2C%22h%22%3A600%7D"></li></ul>&nbsp;3MF & STEP file included!

Super Screw Scrubber: A Sensational Solution for Sparkling Screws (Brushy Edition)

Prop maker

i love this little cat print for halloween and i decide to make a hollowed version for save filament an dprinter faster

Cute Cat Ghost Halloween reix

Halloween 

AP Engineering

Remixes Available for other Food Dehydrators:<ul><li>Silvercrest 350W / Quigg 350W Food Dehydrator: <a target="_blank" href="https://makerworld.com/en/models/14105" rel="nofollow noopener">https://makerworld.com/en/models/14105</a></li><li>MisterChef® Professional Food Dehydrator, 250W: <a target="_blank" href="https://www.printables.com/model/499723-2-spool-dryer-base-for-us-model" rel="nofollow noopener">https://www.printables.com/model/499723-2-spool-dryer-base-for-us-model</a></li></ul>16/05/2023: Added Assembly manual to support assembly._________________________________________________________________________________________________________I was using a generic food dehydrator as a filament dryer (Muhler DHY-500T). It was not very handy to use to dry filament because the spool sits its side, and was weird to put it in and out and I could only dry one spool at a time, which was not very energy efficient. So I took out the electronics from the dehydrator and designed a box from scratch.&nbsp;This is a fully functional 2 spool food dehydrator with a 250W motor (in my case it's 250W, but there are food dehydrators ranging from 150W to 450W). As expected, please use PETG or above (ABS, ASA, etc) to print all the parts since the temperatures should be above 50degC. For the feet you can print in PLA, but I advise in TPU for a nicer feeling. I also included in the rear a nice power cord lock, so even if you pull it up strong it won't rip anything. The lid on the top opens with two hinges in the back, for this M4 Screw and Heated brass inserts is needed, but if you don't have brass inserts you should be fine just with a long M4 bolt and a M4 nut.&nbsp;I included the STEP file in case the electronics of your food dehydrator doesn't fit on those holes you can easily modify it to fit your electronics.&nbsp;This filament dryer is compatible with filament spools as big as 21.5cm (exterior diameter) & 8.5cm (thickness)! So should be compatible with any filament spool available. There's also plenty of space to put some silica bags to keep the humidity down.&nbsp;BOM: Mandatory:<ul><li>Food dehydrator (should be quite generic) - You can buy these used from 5$ to 15$ max</li><li>4x Bearings 608 (608 / 608rs / 608zz, etc…)</li><li>Round Cheap Hygrometer - 2$ for a pair (Search AliExpress “Mini hygrometer”)</li><li>2x Heated Brass Insert M4 (any lenght) and 2x M4 bolts (any lenght above 10mm) OR 2x M4x25mm bolts + 2x M4 nuts - For the hinges</li><li>2x PTFE Tube (to feed filament out of the dryer)</li><li>2x zip ties (to lock the PTFE tube)</li><li>Self tapping screws to lock the electronics in place, to lock the power cord.</li></ul>Optional:<ul><li>5mm heating insulation pad to cover the whole inside walls and increase the heating capabilities and efficiency.</li></ul>If you enjoy it, consider tipping (any amount, even 0.05$ is appreciated) to my Paypal (affp_93@hotmail.com) to keep funding more nice projects like this. Even if you don't feel like donating, putting a like and dropping a appreciation comment goes a long way to support it!

2 Spools Printable Filament Dryer

printing projects

MEAF designs

Say bye to boring afternoons with this amazing maze game! This will not only challenge your solving capabilities but also your collaboration and coordination skills with other people.&nbsp;It consists of a game for two people, where the objective is to take the marble from the initial point to out of the board but you must do it by pulling the corners through a rope to tilt the board and take it through the entire route. <figure class="image image_resized image-style-align-center" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_4crfxnliq8st.gif"></figure>&nbsp;&nbsp;Once you achieve it, you can increase the difficulty by changing one of the ropes and pulling in a cross, or trying to do it in the shortest possible time.&nbsp;<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_tcqmrkplsgno.png"></figure>&nbsp;I have designed this for a 6mm ball bearing, and the max build volume of an ender 3 or similar. so you will be able to print it in almost any printer&nbsp;I´ve made 2 levels: <ul><li>level 0 = easy to achieve, with little travel. to familiarize yourself and learn </li><li>level 1 = with more travel and possible paths. ideal to compete and improve </li></ul>&nbsp;and I'm working on an even more difficult one, let me know if you'd like it. &nbsp;every level starst at the circular wall (there is only one in each), and you have to take the marble to the path until it leaves the board.if you achieve both levels you can use them in other ways, for example starting at each of the corners and taking the marble to the official start or official exit. doing so they practically become 3 versions each&nbsp;you will need:Printed parts1 - game board4 - poles1 - maze of any level you want&nbsp;Not printed parts4 - rope sections of 30cm each (you can use whatever rope you have on hand, from a shoestring to paracord. just make sure you don't use fishing line and pretty much anything can work)&nbsp;1- hot glue gun, 3D gloop, or any glue of your choice for pla or printed material&nbsp;to assembly you just need to glue the poles to the board, and then pass the rope through them to tie the maze at the other end. you can check the pdf for more datailed instructions. &nbsp;&nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,28 mm for board and holders. 0.2 for mazeNozzle diameter: 0,4mm or 0,6mmInfill: 12-15%Perimeters: 2Support: noif you want a multi color maze just insert a filament change at: 1mm&nbsp;&nbsp;you can check all my other designs here<a target="_blank" href="https://www.printables.com/@dgoalva" rel="nofollow noopener">dgoalva | Printables.com</a>&nbsp;&nbsp;&nbsp;

Party Maze challenge

family

Stemfie3D

A rubber band-driven toy car made of parts of the new 3D-printable Stemfie3D construction set. This toy car is easy to 3D-print and quick to build. It is the first <a target="_blank" href="https://makerworld.com/en/u/2144800777/collections/13181" rel="nofollow noopener">project</a> demonstrating the new and fully 3D-printable educational construction set toy.&nbsp;This project exhibits the retention and controlled release of energy to achieve motion. The inspiration for this design is borrowed from science classes in schools, using the mousetrap challenge.<ul><li>Assembly instructions: <a target="_blank" href="https://stemfie.org/sps-000001" rel="nofollow noopener">stemfie.org/sps-000001</a></li><li>Assembly video: <a target="_blank" href="https://youtu.be/8AIVcwuRmV4" rel="nofollow noopener">youtu.be/8AIVcwuRmV4</a></li><li>STEMFIE news 👉 <a target="_blank" href="https://x.com/stemfie3d" rel="nofollow noopener">X.com/stemfie3d</a></li></ul>&nbsp;<figure class="media"><oembed url="https://www.youtube.com/watch?v=LDidml1T6aM"></oembed></figure>&nbsp;<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Please help the @Stemfie3D project by boosting this model.</boostcontent></boostme><figure class="table" style="width: 98.58%"><table class="ck-table-resized"><colgroup><col><col><col><col><col></colgroup><tbody><tr><td><h4 style="text-align: center"><a target="_blank" href="https://makerworld.com/en/@Stemfie3D/collections/13181" rel="nofollow noopener">STEMFIE Projects</a></h4><figure class="image"><a href="https://makerworld.com/en/@Stemfie3D/collections/13181" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014653/design/2024-07-02_ae525c6ab2313.webp"></a></figure></td><td><h4 style="text-align: center"><a target="_blank" href="https://makerworld.com/en/@Stemfie3D/collections/74289" rel="nofollow noopener">STEMFIE Tools</a></h4><figure class="image"><a href="https://makerworld.com/en/@Stemfie3D/collections/74289" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014653/design/2024-07-02_7ff99a852cf11.webp"></a></figure></td><td><h4 style="text-align: center"><a target="_blank" href="https://makerworld.com/en/@Stemfie3D/collections/20500" rel="nofollow noopener">STEMFIE Parts</a></h4><figure class="image"><a href="https://makerworld.com/en/@Stemfie3D/collections/20500" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014653/design/2024-07-02_6b1029cafa348.png"></a></figure></td><td><h4 style="text-align: center"><a target="_blank" href="https://makerworld.com/en/@Stemfie3D/collections/180889" rel="nofollow noopener">STEMFIE Samples</a></h4><figure class="image"><a href="https://makerworld.com/en/@Stemfie3D/collections/180889" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014653/design/2024-07-02_6ea0f6ce68368.png"></a></figure></td><td><h4 style="text-align: center"><a target="_blank" href="https://makerworld.com/en/@Stemfie3D/collections/1505922" rel="nofollow noopener">BL Maker&#39;s Supply</a></h4><figure class="image"><a href="https://makerworld.com/en/@Stemfie3D/collections/1505922" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014653/design/2024-07-02_c5e439c744f3a.png"></a></figure></td></tr></tbody></table></figure>