Printed nicely. Good model.

This was a challenging print for me, using an H2C with Bambu PETG-CF and "Support for PLA" filaments as specified. I found the bond between the support interface and PETG-CF was basically unbreakable - no amount of picking or chiseling would separate them. Switching to PLA for both support material and interface solved this. The tolerances are very tight. Every part needed gentle hammering to fit, which sometimes caused layer separations requiring reprints. (Maybe due to my machine's calibration or this batch of PETG-CF?) The TopLeft and TopRight parts failed several times in the final 20 layers. (The support corrugations running the entire part length caused Y-axis wobble while printing the final overhang.) Changing support pattern to grid fixed this. All that being said, I'm grateful this design exists - I have very limited space so it was worth the tinkering to get it printed correctly. Thanks!