Absolutely love this milk crate, it's my favourite skadis attachment I've seen so far. Luckily i read a lot of comments about the pegs not fitting the skadis board or breaking easily, so I scaled the whole model down to 98.6% size to give more clearance and it fits perfectly. I hope this helps anyone else wanting to print this because it's a really funky piece to have on the board. Printed in bambu PLA silk+ gold with outer wall and top surface speeds at 60mm/second, supports on and 7% infill.

Fantastic model, it works great and printed perfectly first try. I ran out of green halfway but thanks to the printing orientation it accidentally looks kinda cool. Thanks for the model!

This bridge piece came out great. I used a negative modifier in Bambu Studio to remove the bubbly shapes on top just to simplify the shape, and my friend (who I printed this for) was very impressed with the outcome. I printed with 0.4mm nozzle using Bambu's PLA Silk + Gold and slowed the external wall speed down to about 120mm/s. Also used auto tree supports which broke off easily. Thanks for the model!

Just the right fit!

Exactly what I needed to stop my riser from deforming from the weight of four kg of filament

Definitely helps with quickly aligning the build plate

Perfect little stand to keep in my toolbox at work. Very snug fit, great design!

Works great for holding kitchen hand towels too

Fits very well and works even better!

I printed this for my fiance's birthday and she absolutely loves it... though maybe not as much as i love it. The printing was fine but the assembly of the forklift was a lot of fun (for me, not so much for her). There's a lot of small parts and wiring but the assembly guide is great and easy to follow. I've been wanting a remote control forklift for years and this is the best thing I've printed so far.

Absolutely great idea, I'm surprised this isn't most popular because I much prefer a functional door handle that's easy to grab. It's fairly sturdy, it twists on the mounting screws if you pull the top or bottom of the handle but some double sized tape would fix that easy. The print failed on me twice, possibly bad bed adhesion so I gave the build plate a soap wash and added a brim to the print profile and it worked perfectly after that. The thin walls seemed to make it hard to adhere to the bed, but I'm still giving 5 stars cause it might just be that the bed wasn't clean enough. Thanks for the awesome design!

I absolutely love this fan cover. I spent weeks looking for the right design but this is what I needed. The profile is great, printed perfectly first try in only 11 minutes.

A great idea! Unfortunately the stands are too short for my Mitutoyo 200mm verniers, but I'm thinking that a simple riser plate will be enough to fix that. If I get the time I'll try to remix with my adjustments and see if that helps anyone with the same size verniers. The only other suggestion I have is to bring the round cut out for a pen to the front of the tray, as it feels a bit too cramped to grab the pen when the verniers are sitting right above. Other than that it's a great design, great print with no issues at all!

Such a great idea! The print was good with only a few small smudges around the text, but i wasn't expecting perfection with a 0.4mm nozzle. I ran out at 50% speed and admit 80% of the fine detail is great, the rest is decent. Easy assembly, it all clips together in less than a minute from start to finish. The gears are a bit too snug from the 20-30 mark, but that could just be a bit of excess i didnt trim off before assembly. Photo taken with and printer 20mm endmill, and the gauge correctly measuring a 10mm radius.

Great design! I love the pop of colour this gives my printer, and it's a much better cover for the Z axis bearings than the last one I tried. Printed perfect first try, I used the paint tool with "detect edges" to select the layer below the honeycomb and make it blue. The fit is very snug, I wasn't sure it was going to fit at first but just needs to clip into place and it's not going anywhere.

This print is great, nice and quick. The only issues I had printing with Bambu PLA basic were the letters looked a little patchy or thin in some spots, like the white isnt thick enough and has a bit of blue coming through from below. When looking at the sliced layers on bambu studio you can see the first two layers of the lettering are a mix both colours, and then the rest are the text colour. The patchy parts seem to line up with the spot where the text has a blue base instead of white. Changing that little bit make the text all one colour instead of two could solve the thin looking colour and also save wastage between colour changes. I only noticed because I wondered why there was 4 colour changes but only two colours. All in all though it's barely noticeable and I still love it. Thanks for the design!

The quality of this print is great and works perfectly for different sizes and shapes of pot lids

This print is a fantastic idea! The surface came out really smooth and is a great way to store my two favourite coffee pods. I printed it with white PLA basic and it matches the colour of my coffee machine really well.