tino.decker

Paolo Valli

This is a box for Noctua (but maybe also other vendor) 120mm fans.The fan box can be used with 10cm (4inch) hose to send fumes out of the window.The Noctua NF-F12 iPPC-3000 fits perfectly.If you need to install the box to the wall, there is a mount kit with anti-vibration system (to be printed in TPU).&nbsp;You need to cut anti-vibration pieces according to your needs.You should buy nuts and bolts according to your setup. I used M4x40mm for the box and M6x45mm for wall support. Washers suggested everywhere.&nbsp;For doubts and questions, please ask.

Noctua 120mm fan box for exhaust duct

Cooling

Biochem

Wall mounted shoe rackSpace saver

Shoe Rack Holder / Organizer Wall Mounted

Organize

Reclip

Collection of brackets and braces of different sizes and types.Designed for 4mm screws.&nbsp;Non-countersunk version here:<a target="_blank" href="https://makerworld.com/en/models/167900" rel="nofollow noopener">https://makerworld.com/en/models/167900</a>&nbsp;Print settings:layer height: 0.12-0.16 for max strenghtperimeters: maxsupports: no&nbsp;In case you're missing any type or size, please let me know and I will create a new model and add it to this collection.

Ultimate brackets collection

Garage

papsjundi

This is my second design trying to come up with a solution for the “Jumping Spool” issues. I shared my first design “<a target="_blank" href="https://makerworld.com/en/models/37390#profileId-35773" rel="nofollow noopener">AMS SPOOL GUARD”</a>, but after that… I tried to document and learn a bit more to understand why do the spools jumps in the first place. I shared some slow-mo video on facebook groups and got so many feedbacks (and mockings) I think understanding the cause would help come up with a better solutions… I think up to 3 things contributes to the spool jumps 1. When the filaments are low, the angle becomes sharper / steep.. so the extruder makes a more forward pull instead of downward… 2. Extruder speed is faster than the Front Roller, so it was holding it back (plus sharper angle too) 3. Tangled filament so for Tangled filament, it's probably for someone smarter than me to solve lol I am attempting to eliminate or at least reduce cause number 1, which is height differences. First try, I tried to modify the first design, and move the “bar” from the back to the front, using the same mount (which was a nice secure spot mount it) The problem with that idea I don't have a place for the mount for the left and right side of the AMS… <img src="https://media.printables.com/media/prints/613353/rich_content/e37c8aab-0f0a-44d0-b74a-ccb176d3b0da/screenshot-2023-10-13-at-21225-pm.png#%7B%22uuid%22%3A%226533e8de-8244-4d91-8f45-3027d0872bba%22%2C%22w%22%3A2424%2C%22h%22%3A1488%7D">&nbsp;I also tried the suggestion using the AMS Button + a longer PTFE attached This helped to reduce the wear and tear but it the ptfe tube is so flexible so it will still bend and the spool jumps too. Some one also suggested putting a battery to wedge the spool so it does not wobble, I tried that too (using the same mount as my previous design) with removable “wedges” of various thickness <img src="https://media.printables.com/media/prints/613353/rich_content/698daa02-f726-48fd-9823-36b783c63904/ptfe.png#%7B%22uuid%22%3A%22f9afdcae-21e2-4bfe-9860-de866fae6acc%22%2C%22w%22%3A2275%2C%22h%22%3A1812%7D"> So instead I looked at the possibility of mounting it on the First Stage Feeder, so I took my spare one and measured the openings… <figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://media.printables.com/media/prints/613353/rich_content/d227a3ad-e665-4d91-a4c0-1c112fbb242f/img_5562.jpg#%7B%22uuid%22%3A%222fa0137b-b5e8-45ba-a9bb-89d9003968fa%22%2C%22w%22%3A4032%2C%22h%22%3A2268%7D"></figure>&nbsp;<figure class="image image_resized image-style-align-center" style="width:50%;"><img src="https://media.printables.com/media/prints/613353/rich_content/63fb7587-98e4-45af-b4a7-6221035b0033/screenshot-2023-10-12-at-84758-pm.png#%7B%22uuid%22%3A%22a9663804-c66c-4afc-b38a-89c9d5f7001e%22%2C%22w%22%3A2152%2C%22h%22%3A1550%7D"></figure>Went through several iterations until I come up with the latest one. No… it was NOT modelled after the Iron Throne :) <figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://media.printables.com/media/prints/613353/rich_content/dcc3e938-d22a-416d-80d5-6ffd34569ae0/img_5563heic.jpg#%7B%22uuid%22%3A%22a9574cb1-cbdb-4c55-a05d-9f098a0b067c%22%2C%22w%22%3A3024%2C%22h%22%3A4032%7D"></figure>1 issue I found that, the filament will scar the Helper… This is just after 1 print… &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;So I added a 4x25mm SS rod on top, you can get them on <a target="_blank" href="https://www.amazon.com/dp/B08M33CNS6?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">amazon</a> it should sit flush in the cavity provided. <img src="https://media.printables.com/media/prints/613353/rich_content/384ce9b8-e3f2-46a5-badf-d8dc2bee9a55/amshelper150.png#%7B%22uuid%22%3A%222f61f194-6b24-4b8c-b906-f8761571eeaa%22%2C%22w%22%3A1920%2C%22h%22%3A1080%7D">&nbsp;and here's the finished project… at least for now…<img src="https://media.printables.com/media/prints/613353/rich_content/bcfa4439-d640-4844-8efc-bf0ef2d0c409/img_5565.jpg#%7B%22uuid%22%3A%22dc375791-2af7-4e2b-b3c1-95ac90104a51%22%2C%22w%22%3A5712%2C%22h%22%3A4284%7D"> This is by no means it will fix all… but at least it “should” make the angle less steep… and the filament will go more straight down to the first stage feeder. I am still studying but at least this is for now one solution that might reduce the issues… I would love you to try and give me feedback… I included the 3MF for Bambu Studio, comes in 2 plates… if you want to use the <a target="_blank" href="https://www.amazon.com/dp/B08M33CNS6?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">metal rod</a> and logo, you can print plate 1, if you don't then you can print Plate 2. 0.3 mm first layer , the rest 0.2 mm Layers - Adaptive Layer Gyroid infill at 30% to make it stiffer. Step files are also uploaded if you like to tinker / remix… please do. Any suggestion / comments please hit the reply :) <img src="https://media.printables.com/media/prints/613353/rich_content/b976f4ef-df35-4284-b3e9-64baceb676eb/build-plate.png#%7B%22uuid%22%3A%22dd3f7935-07e1-4c02-8237-642bb1697be8%22%2C%22w%22%3A2462%2C%22h%22%3A1318%7D"> Thank You! NOTE: this was designed for the original AMS, I have not tested with Hydra Mods… &nbsp;&nbsp;

Bambu Lab AMS Helper

Bambu

Küche

Morris

Cute snowman you can build yourself - DIY!&nbsp;There are different arms, hats, caps, skis and mittens to choose from. Build your own. Print in different colors, put together with ordinary super glue.This enables hundreds of combinations.&nbsp;Please feel free to remix! Add your own accessories and let everyone take part of your creations! Make new arms, mittens, hats or maybe some ice skates?&nbsp;All holes in both head and torso are at a diameter of 5.2mm so it can easily fit arms, buttons, nose etc. with a diameter of 5mm.

Snowman DIY - Choose your own style!

Christmas

wuguigui

<div><h1>Summary</h1><div><h2>06/14/2022 Updated： Upload new version for 3030 profiles. Have a try! Someone said this one might doesn't work, but he tried 4040 25% scaled smaller can fits perfect for 3030.</h2>The same day updated: New parts for 2020 aluminum profile.<h2>If you find it loose when fixing it into the profile, just scale a little in the slicer software.</h2>Sometimes when you want to attach stuff to the aluminum profile, you must disassemble the whole structure. It's really miserable :(Now we have this, just 4 parts can be easily printed without support, just download and follow the diagram pictures and try. You can also use your own parts to replace the "Clip_holder" part.The files uploaded are for "4040" aluminum profile, I will make a new one for "2020" later.Welcome to upload your specific holder parts in remixes. Enjoy! See my other designs at: <a href="/wuguigui/designs" rel="nofollow">https://www.thingiverse.com/wuguigui/designs</a></div><h1>Post-Printing</h1><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=WniC9C6CMLg"><iframe src="//www.youtube.com/embed/WniC9C6CMLg" frameborder="0" allowfullscreen="allowfullscreen"></iframe></div><pre><code> <img src="https://cdn.thingiverse.com/assets/a2/a4/f1/5a/e2/20220511133928-1.jpg"> <img src="https://cdn.thingiverse.com/assets/14/13/87/bb/8a/20220511133921.jpg"> <img src="https://cdn.thingiverse.com/assets/b1/9d/d1/1e/f9/20220511173114.jpg"> <img src="https://cdn.thingiverse.com/assets/9c/43/2a/98/f1/20220511173120.jpg"></code></pre></div>

Profile Clip

SIM Racing

Jal Shah

To continue on the previously designed tetrahedron lamp, I designed dodecahedron lamp. I also found tetrahedron lamp to be a bit on a smaller side, so this time I wanted something larger. This lamp is 360mm (≈ 14 inches) tall and 320mm (≈ 12.6 inches) wide and deep.You can use LEDs with this lamp and there is a special frame designed for LED wiring. You can also use E26 \ E27 standard pendant light with this lamp and there is a special insert for that. You also get a stand if you decide to put the lamp on some surface or you can hang the lamp with pendant light.You will also find two types of films this time. One is simple and plane, but the other has numbering on it to make the D12 dice lamp for your gaming room.<h3>Printing</h3>Depending on the version you choose to print, you can refer to the guide below for the number of pieces that need to be printed.<h5>LED Version</h5><ul><li>11 Frame Pieces</li><li>1 Frame with Hole for LED Strip Wire</li><li>12 Insert Pattern Pieces</li><li>12 Insert Films (Pattern 1 or Pattern 2)</li><li>30 Alignment Keys</li></ul><h5>Pendant Light Version</h5><ul><li>12 Frame Pieces</li><li>11 Insert Pattern Pieces</li><li>1 Insert Pattern - For E26_E27 Pendant Lamp</li><li>11 Insert Films (Pattern 1 or Pattern 2)</li><li>1 Insert Film - For E26_E27 Pendant Lamp (Pattern 1 or Pattern 2)</li><li>30 Alignment Keys</li></ul><h5>Stand</h5><ul><li>1 Stand Top</li><li>1 Legs Connector</li><li>5 Legs</li></ul><h3>Assembly</h3><ul><li>Glue \ Press fit inserts into frames.</li><li>I used Vellum paper as the inside backing to diffuse the light. You can print and use either of the inserts for light diffusion as well.</li><li>Stick printed inserts or vellum paper to the inside of the frames.</li><li>Glue all frames together using alignment keys and keeping the bottom side open.</li><li>Finish led work or pendant lamp before inserting the bottom insert. I used pendant light wiring kit myself.</li><li>Lastly attach the bottom panel. I used tacky craft glue to attach the bottom panel to be able to take it off if I need to change the bulb.</li></ul>

Dodecahedron Lamp

Lampen

BrandedAbstract3D

I just wanted to drop you a quick note of thanks and share a link to the creator that inspired this phone holder. The incredible <a target="_blank" href="https://makerworld.com/en/@StepanK" rel="nofollow noopener">@StepanK</a> here on Maker World. Your original creation sparked some creativity on my end, and I ended up doing a simple remix of it. Go checkout all of his new Maker World creations. His work has been a fantastic source of inspiration, and I&#39;m happy to honour that by sharing what I&#39;ve come up with. Thanks again for sharing your creativity with the world.&nbsp;Wanna Sell This and Other Items? Check out my Patreon for a commercial license. <a href="patreon.com/BrandedAbstract3D" rel="nofollow">patreon.com/BrandedAbstract3D</a>&nbsp;Phone holder designed to resemble a Recaro Racing Seat, unique and functional, great for any space. It&#39;s a top conversation starter for anyone who loves cars. Always adds a touch of car scene to your surroundings.&nbsp;To complete the phone holder you&#39;ll need:<ul><li>1 x Seat (printable)</li><li>1 x Roll Cage (printable)</li><li>2 x Support Struts (printable)</li><li>8 x M3 Screws</li></ul><h3>Print Settings</h3>I usually go for the BBL “Standard” 0.20mm settings. It seems to strike the right balance between quality and speed compared to other profiles. I&#39;m a fan of the consistent layer height of 0.2mm, but variable layer height is good too! Feel free to play around with the print quality settings to see what works best for you. I&#39;ve had success with BBL Filaments and various other brands, but for Silk PLA, slowing down the outer walls to around 50mm/s seems best.&nbsp;<ul><li>Seat: Use a 10% grid infill—it&#39;s sturdy enough to hold a phone. I used to two bottom shell layers; once the support struts are fitted, the seat base doesn’t touch the tabletop. And, I set the seam position to “back”. I’ve found it looks more intentional, and you kind of forget it’s there!</li><li>Roll Cage: A 0% infill will save print time and is still pretty strong, even for two perimeters.</li><li>Support Struts: Use a 15% grid infill. This part is mostly top and bottom shell layers, but a good scaffold is needed for the top layers to build on. Important: set the top surface to 50mm/s for a smoother finish! You could turn on ironing, but I prefer seeing some industrial layer lines.</li></ul><h3>Assembly</h3>Assembly is a breeze! You&#39;ll get it from just looking at the photos. Insert the M3 screws into the holes and tighten all parts together. Avoid screws longer than 10mm to prevent them from sticking out of the holes in the roll cage. It won’t break anything, but you’ll see the backs of them protruding.&nbsp;Happy Printing!&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/ba3d" rel="nofollow noopener">Buy Me A Coffee</a> ☕(Appreciated but absolutely not required)

Recaro Racing Seat Phone Holder

Büro

Kocyns

<h3>Basic info:</h3><ul><li>Toroidal propeller launcher with double planetary gearbox.</li><li>Update: Part 13-256.stl - extended stick for bed 256x256mm (A1/P1/X1).</li></ul><figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-12-17_c4bb05a73c6fe.gif"></figure><figure class="image image_resized" style="width: 39.63%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_83uzwi9s2ww6.gif"></figure>&nbsp;Gearbox:<ul><li>Non-printable parts: You just need one type of screws (M3x16 Countersunk screw, DIN 7991) for assembly.</li><li>Gear ratio 1:12 with smooth move.</li></ul><figure class="image image_resized" style="width: 28.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_zynkq0o8slne.gif"></figure><h3>Printing:</h3><ul><li>No supports!</li><li>Layers height are 0,12-0,2mm.</li><li>Recommended material for gears is PETG, see below to BOM.</li></ul><h3>BOM:</h3><figure class="table"><table><thead><tr><th colspan="4">Printed parts/Purchased parts</th></tr><tr><th style="border: 1px solid #000000">Item</th><th style="border: 1px solid #000000">File</th><th style="border: 1px solid #000000">Qty</th><th style="border: 1px solid #000000">Description</th></tr></thead><tbody><tr><td style="text-align: center">1</td><td>1.stl</td><td>8</td><td>PETG</td></tr><tr><td style="text-align: center">2</td><td>2.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">3</td><td>3-Ring-up.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">4</td><td>4-Ring-down.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">5</td><td>5.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">6</td><td>6.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">7</td><td>7.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">8</td><td>8.stl</td><td>1</td><td>PLA (1)</td></tr><tr><td style="text-align: center">9</td><td>9.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">10</td><td>10.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">11</td><td>11.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">12</td><td>12.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">13</td><td>13, 13Low ,13-256</td><td>1</td><td>PETG (2)</td></tr><tr><td style="text-align: center">14</td><td>14.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">15</td><td>Tor_170.stl, Tor_200.stl</td><td>1</td><td>Propeller (3)</td></tr><tr><td style="text-align: center">-</td><td>Tor_base.step</td><td>-</td><td>to create remixes</td></tr><tr><td style="text-align: center">16</td><td>Screw M3x16</td><td>11</td><td>Countersunk screw (DIN 7991)</td></tr></tbody></table></figure><ol><li>Recommended high of layers 0,12mm</li><li>13Low.stl is for printer bed size under 250x210mm. 13-256.stl - extended stick for bed 256x256mm (A1/P1/X1).</li><li>170mm or 200mm toroidal propeller +105mm. Recommended high of layers 0,12mm.</li></ol><h3>Assembly:</h3>STEP 1:<figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_wkmqsgwz6zyl.png"></figure><figure class="image image_resized" style="width: 40.03%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_lbjrwlyynvsa.png"><figcaption>Note: Screw (red) in detail A shouldn&#39;t be too tight!</figcaption></figure>STEP 2:<figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_ozf5yzznmp1z.png"></figure>STEP 3:<figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_oog17ne6f0uq.png"></figure>STEP 4:<figure class="image image_resized" style="width: 39.99%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_sstcnap2p6qk.png"></figure>STEP 5: Let&#39;s fly!!<figure class="image image_resized" style="width: 40.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_4qb6fj7yq7z3.png"></figure><h3>Commercial uses:</h3>If you want permission for commercial use: <a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a>&nbsp;&nbsp;Note: By downloading and using the model, you agree that it is provided &#34;as is,&#34; without any warranties. The authors of this model are not liable for any accidents, damages, or other issues that may arise from its use. Users are encouraged to exercise caution and use the model responsibly. The author disclaims any responsibility for any losses or damages incurred through the use of this product.

ToroSpin Turbo - Launcher with planetary gearbox

Spielzeug

Waikikiprod

<h2>02/02/24 : a Valentine's day variation is available <a target="_blank" href="https://makerworld.com/en/models/168156" rel="nofollow noopener">HERE </a></h2><figure class="image image_resized image-style-side" style="width:22.76%;"><a href="https://makerworld.com/en/models/168156" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2024-02-02_897099cc5abb18.gif"></a></figure><h2> </h2><h2>15/12/23 Update : Foldable ribbons availiable</h2><h2>12/12/23 Update : a <a target="_blank" href="https://makerworld.com/fr/models/90640" rel="nofollow noopener">special Makerworld edition is availiable here</a></h2><h2>For <a target="_blank" href="https://www.printables.com/fr/model/677685-lockable-present-ingenious-mechanism-commercial-us" rel="nofollow noopener">Commmercial use it'is possible here</a></h2><figure class="image image_resized image-style-side" style="width:26.19%;"><a href="https://makerworld.com/fr/models/90640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-12-12_a3b0161c841d58.png"></a></figure><h2>12/12/23 Update : new mono 3Dprinter profils !</h2><h2>11/12/23 Top 20 in the Christmas competition 2023</h2><h2>A Christmas gift with an ingenious locking system !</h2><h2>Simply twist the knot to lock or unlock the present !</h2>No need screws.<figure class="table"><table><tbody><tr><td><h4>You want to sell my 3D printed model : </h4><a target="_blank" href="https://www.printables.com/@Waikikiprod#join:367" rel="nofollow noopener">Subscribe to my club for 3$/month to be authorized to sell my physical 3D printed objects as long as you are subscribed</a></td><td><figure class="image"><img src="https://media.printables.com/media/prints/676503/rich_content/87883904-771e-4333-9188-40de5706c034/image.png"></figure></td></tr></tbody></table></figure><h2><a target="_blank" href="https://www.instagram.com/reel/C0R34OFrZxP/?utm_source=ig_web_copy_link&igshid=N2ViNmM2MDRjNw==" rel="nofollow noopener">Video of assembly Here</a></h2><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_a244242c3194c8.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_01c02e164c2a28.gif"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_d007994e3e8f18.png"></figure></td></tr></tbody></table></figure>Precautions :- do not change the first layer speed of 3mf files.- Your print bed must be completely clean.&nbsp;Advices :- Use 3D Lake Spray<h2>Different ways to print :</h2>&nbsp;<figure class="table" style="width:85.93%;"><table class="ck-table-resized"><colgroup><col><col><col><col></colgroup><tbody><tr><td><h2>The Box</h2></td><td>.3mf files</td><td>.stl files</td><td>Note</td></tr><tr><td style="text-align:center;"><figure class="image image_resized" style="width:50.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_4b9ce7cee2a09.png"></figure>Dual Color</td><td style="vertical-align:top;"><ul><li>box dual color .3mf</li></ul></td><td style="vertical-align:top;"><ul><li>box corp.stl</li><li>Box Ribbon dual color.stl</li></ul></td><td style="vertical-align:top;"><ul><li>best visual</li><li>long</li><li>no assembly steps</li><li>No need glue or screws</li><li>Need AMS</li></ul>&nbsp;</td></tr><tr><td><figure class="image image_resized" style="width:58.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_ddaa4e66428928.png"></figure>Dual color More Fast</td><td style="vertical-align:top;"><ul><li>Box Dual Color more fast .3mf</li></ul></td><td style="vertical-align:top;"><ul><li>box corp.stl</li><li>Box Ribbon plate.stl</li><li>Box Side Ribbon one.stl x4</li></ul></td><td style="vertical-align:top;"><ul><li>Best speed/time ratio</li><li>Need Glue</li><li>Need AMS</li></ul></td></tr><tr><td style="text-align:center;">NEW<figure class="image image_resized" style="width:65.1%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-12-07_6e8f3d496abfb8.bmp"></figure><figure class="image image_resized" style="width:66.03%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-12-07_3b1aaeabb335d8.bmp"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-12-15_b6ca630d0f031.png"></figure>Best mono 3dprinter profil</td><td style="vertical-align:top;"><ul><li>box mono 3d printer.3mf</li></ul>&nbsp;<ul><li>box lid mono 3d printer.3mf</li></ul>or<ul><li>Foldable Ribbons.3mf</li></ul></td><td style="vertical-align:top;"><ul><li>Box corp.stl</li></ul>&nbsp;<ul><li>Box Ribbon Mono 3D printer.stl x4</li></ul>or<ul><li>Foldable lid ribbon mono.stl</li><li>Foldable box ribbon mono</li></ul></td><td style="vertical-align:top;"><ul><li>Good visual</li><li>Faster</li><li>no need AMS</li><li>Need Glue</li><li>Support</li></ul></td></tr><tr><td style="text-align:center;"><figure class="image image_resized" style="width:50.42%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_58aadd48792f6.png"></figure>2 single color print</td><td style="vertical-align:top;"><ul><li>Box Single Color.3mf</li><li>Box Ribbon Single Color.3mf</li></ul>&nbsp;</td><td style="vertical-align:top;"><ul><li>Box corp.stl</li><li>Box Ribbon plate.stl</li><li>Box Side Ribbon one.stl x4</li></ul></td><td style="vertical-align:top;"><ul><li>Faster</li><li>no need AMS</li><li>Need Glue</li><li>Support</li></ul></td></tr></tbody></table></figure>&nbsp;&nbsp;<figure class="table" style="width:84.66%;"><table class="ck-table-resized"><colgroup><col><col><col><col></colgroup><tbody><tr><td><h2>The Lid</h2></td><td>.3mf files</td><td>.stl files</td><td>Note</td></tr><tr><td style="text-align:center;"><figure class="image image_resized" style="width:50.56%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_74f043e9cc08a.png"></figure>Dual Color</td><td style="vertical-align:top;"><ul><li>Lid Dual Color.3mf</li></ul></td><td style="vertical-align:top;"><ul><li>Lid.stl</li><li>Lid DualColor Ribbon.stl</li></ul></td><td style="vertical-align:top;"><ul><li>best visual</li><li>long</li><li>no assembly steps</li><li>No need glue or screws</li><li>Need AMS</li></ul>&nbsp;</td></tr><tr><td><figure class="image image_resized" style="width:73.82%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_981e1ca55db52.png"></figure>Dual color More Fast</td><td style="vertical-align:top;"><ul><li>Lid dual color more fast.3mf</li></ul></td><td style="vertical-align:top;"><ul><li>Lid.stl</li><li>Lid Ribbon Plate.stl</li><li>Lid Ribbon Side one.stl x4</li></ul></td><td style="vertical-align:top;"><ul><li>Best speed/time ratio</li><li>Need Glue</li><li>Need AMS</li></ul></td></tr><tr><td>NEW<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-12-15_b6ca630d0f031.png"></figure><figure class="image image_resized" style="width:75.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-12-07_f325f2210fc95.bmp"></figure><figure class="image image_resized" style="width:73.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-12-07_259ab40c4f41e.bmp"></figure>Best mono 3dprinter profil</td><td><ul><li>Foldable Ribbons.3mf</li></ul>or<ul><li>Lid ribbon mono 3d printer.3mf</li></ul>&nbsp;<ul><li>Lid mono 3d printer.3mf</li></ul></td><td><ul><li>Foldable lid ribbon mono.stl</li><li>Foldable box ribbon mono</li></ul>or<ul><li>lid ribbon mono 3D printer.stl</li></ul>&nbsp;<ul><li>Lid.stl</li></ul></td><td><ul><li>Good visual</li><li>Faster</li><li>no need AMS</li><li>Need Glue</li><li>Support</li></ul></td></tr><tr><td style="text-align:center;"><figure class="image image_resized" style="width:50.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_ba266743c2fad8.png"></figure>2 single color print</td><td style="vertical-align:top;"><ul><li>Lid Single Color.3mf</li><li>Lid Ribbon Single Color.3mf</li></ul>&nbsp;</td><td style="vertical-align:top;"><ul><li>Lid.stl</li><li>Lid Ribbon Plate.stl</li><li>Lid Ribbon Side one.stlx4</li></ul></td><td style="vertical-align:top;"><ul><li>Faster</li><li>no need AMS</li><li>Need Glue</li><li>Support</li></ul></td></tr></tbody></table></figure>&nbsp;<figure class="table"><table><tbody><tr><td> </td><td> </td><td> </td><td> </td></tr></tbody></table></figure>&nbsp;<figure class="table" style="width:84.41%;"><table class="ck-table-resized"><colgroup><col><col><col><col></colgroup><tbody><tr><td><h2>The Node</h2></td><td>.3mf files</td><td>.stl files</td><td>Note</td></tr><tr><td style="text-align:center;"><figure class="image image_resized" style="width:51.32%;"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-11-29_d6b57df443bf58.png"></figure>Single Color Print</td><td style="vertical-align:top;"><ul><li>Node Single Color.3mf</li></ul></td><td style="vertical-align:top;"><ul><li>node.stl</li><li>node Ribbon.stl</li><li>node half.stl x2</li><li>Lock Disc.stl</li><li>Pin.stl</li><li>Lock Pen.stl x2</li></ul></td><td><ul><li>best visual</li><li>Fast</li><li>No need AMS</li><li>No need glue or screws</li></ul></td></tr></tbody></table></figure>&nbsp;<h3>Thanks to you and your downloads, this 3D model is free! Thank you so much !!! <3</h3>Follow me on<a target="_blank" href="https://www.instagram.com/waikikiprod/" rel="nofollow noopener"> Instagram</a> / <a target="_blank" href="https://www.tiktok.com/@waikikiprod" rel="nofollow noopener">TikTok</a> / <a target="_blank" href="https://www.facebook.com/waikikiprod" rel="nofollow noopener">Facebook</a> / <a target="_blank" href="https://beacons.ai/waikikiprod" rel="nofollow noopener">Beacons</a>Discover My Best 3D Models<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/14009?profileId=13993" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-09-11_49db957f2d46d.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/14009?profileId=13993" rel="nofollow noopener">X1C Keychain</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13847?profileId=13645" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-09-11_03b57abb0262f.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13847?profileId=13645" rel="nofollow noopener">Axe Magnet</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13841?profileId=13635" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-09-11_d454006b5cde4.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13841?profileId=13635" rel="nofollow noopener">Tank toy - Print in place</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/fr/models/13159?profileId=13163" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-09-11_ec02bcb1e833b.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13159?profileId=13163" rel="nofollow noopener">Foaming Soap Dish</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13723?profileId=13450" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-09-11_e177dc4e45a09.jpg"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13723?profileId=13450" rel="nofollow noopener">The console of your childhood</a></td><td><figure class="image"><a href="https://makerworld.com/fr/models/13846?profileId=13640" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/485424/2023-09-11_2d9999d3ea301.png"></a></figure><a target="_blank" href="https://makerworld.com/fr/models/13846?profileId=13640" rel="nofollow noopener">The Ultimate Fidget Avocado Keychain</a></td></tr></tbody></table></figure>

Lockable Present - Ingenious mechanism

Boxen

Prestige Prototype

Introducing the Mid Century Modern Planter:Transform your green space with our Mid Century Modern Planter – a masterpiece of minimalist design and modern aesthetics. This easy-to-print model seamlessly blends sophistication with simplicity, offering a touch of timeless elegance to any environment.Crafted for both form and function, our planter boasts a watertight design to make plant care a breeze. No need to worry about excess water – we've included a seamlessly integrated plate that effortlessly catches overflow during watering. Experience the perfect harmony of style and practicality as you bring this sleek planter to life in your 3D printing projects. Elevate your plant game with our Mid Century Modern Planter – where beauty meets functionality.

Mid century modern - Medium Planter

Pflanzen 

franceschellifederico

Description: Introducing the Universal Kitchen Bag Clip, a versatile solution for sealing open bags in your kitchen. Crafted at 125mm in length, this clip is meticulously designed for durability and convenience. I was Inspired by <a target="_blank" href="https://www.printables.com/it/model/619676-the-ultimate-bag-clip-very-strong-various-sizes/files" rel="nofollow noopener">this</a> (I redesigned it from scratch introducing a lot of things), it optimizes closure efficiency, keeping your food fresher for longer periods.Material Recommendation: I recommend using PLA, PETG, ABS, or similar materials based on user preferences. These materials ensure a sturdy, reliable clip suitable for various bag types and kitchen needs.Print and enjoy this efficient, reusable clip to maintain the freshness of your favorite foods while reducing waste.<figure class="image image_resized" style="width:56.55%;"><img src="https://makerworld.bblmw.com/makerworld/draft/415357/2023-12-13_96c2aa92abe32.png"></figure>

Kitchen Bag Clip

Sven97

<h2>1. Model Overview</h2>Have you heard of <a target="_blank" href="https://en.wikipedia.org/wiki/Rubber_duck_debugging" rel="nofollow noopener">Rubber Duck Debugging</a>?<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/72654698-7073-41ca-a480-ce07c4a5ae8e.jpg"></figure>Good news! You can upgrade your rubber duck to a more powerful dinosaur now! A dino a day keeps the bug away!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/2023-12-11_4f8a177daa696.jpg"></figure>This model is designed based on Google Chrome Dinosaur Game, you can see the lonely T Rex when your chrome being offline. The game can also be accessed by inputting chrome://dino or chrome://network-error/-106 on a Chromium based browser.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/529dfef9-0517-467a-9460-33997ea53bea.gif" alt="As the Chrome dino runs, we caught up with the Googlers who built it"></figure><h2>2. Model Specifications</h2><ul><li>Dimensions: <ul><li>Dino: 77mm (H) x 70mm (W) x 21mm (D)</li><li>Standing Plate: 7mm (H) x 73.5mm (W) x 35mm (D)</li></ul></li><li>Weight:<ul><li>Dino: 22g</li><li>Plate: 7g</li></ul></li><li>Material &amp; Color Recommendations:<ul><li>Dino body and standing plate feet attachment: White <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/2024-01-10_2f8f0e4215f7a.png"></li><li>Dino eyes and standing plate: Black <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/2024-01-10_38c02d7479b6b.png"></li><li>Or vice versa</li></ul></li></ul><h2>3. Printing Parameters</h2><ul><li>Layer Height: 0.08mm is recommended to ensure a smooth finish</li><li>Infill Percentage: 15% for optimal balance of strength and material usage.</li><li>Support/Adhesion: No support</li><li>Plate: Smooth PEI Plate or Textured Plate all works great</li></ul><h2>4. Assembly Instructions</h2>The model is designed in two pieces to avoid the need for supporting structures. This allows you to achieve a flawless printing surface with your finest printing profile.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/2023-12-11_34551b411e528.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/2023-12-11_dd7233def4be5.png"></figure>A snap-fit structure is designed to help the two parts join together easily and precisely. Glue is not necessary for the assembly, but there is space for glue if you want to ensure a permanent joint.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/2023-12-11_ee9d30978cfc2.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/2023-12-11_052fdeb64d305.gif"></figure>If you printed with an older profile, the hooks might be thinner and easy to break. Please be gentle when assembling the two pieces. This issue has been fixed with the 2024/01/02 updated profile.<blockquote>This issue is fixed with my 2024/01/02 Updated profile</blockquote><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/2023-12-11_db80786065c73.jpg"></figure>Have fun printing your own little dino🦖! Don&#39;t forget to share a picture of your dino in the comment!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/2023-12-11_03a963241fafc.jpg"></figure>Additional notes:If you don&#39;t have AMS for multicolor printing, you can remove the eye components from the printing profile. The model will still print fine, and you can then use a pen or marker to draw the eyes afterward.<h2>5. Gallery of Finished Prints</h2>&nbsp;<h2>6. Version History and Updates</h2><ul><li>2024/05/12 Update<ul><li>Update document</li><li>Add demo section for finished prints</li></ul></li><li>2024/02/11 Update:<ul><li>Add chamfer in the body internal part to make the assembly easier and avoid breaking the snap structure.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/2024-02-11_8a0bd717a93e3.png"></li></ul></li><li>2024/01/02 Update<ul><li>Combine two components into one profile, hide old print profile</li><li>Make hooks and grooves in the snap-fit structure thicker and stronger to avoid breaking issue mentioned in the comments<ul><li>I was using PLA Tough for the body structure print, so I didn&#39;t encountered this breaking issue in the past. One day I tried PLA Basic for the body and I noticed this issue might be very common as some comments mentioned (So I found out PLA Tough is a little bit different from PLA Basic indeed LOL). Thanks so much for sharing your printing experience!</li></ul></li><li>Add chamfer for the hook structure to support the new change</li><li>Update raw model file and print profile with new design</li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/2024-01-02_9e907b380651a.gif"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/2024-01-02_09621c153a2a8.png"></figure><ul><li>2023/12/12 Update<ul><li>Add model and print profile of a base for the T-Rex to help it stand on the desk more stably.</li></ul></li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/2023-12-12_80cbc3da1b7e8.jpg"></figure><h2>7. Support Me</h2>☕ Enjoying this small dino? Fuel the creativity and let&#39;s keep the adventures roaring with a cup of coffee for the road!<a target="_blank" href="https://buymeacoffee.com/sven97" rel="nofollow noopener">Buy me a coffee</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000090219/design/2024-05-16_897a3bd841edf.png"></figure>

Chrome Dinosaur

Figuren

MIPI3D

&nbsp;Added a new piece to the collection. Sphere 2 (UPDATE 13/12)&nbsp;Introducing our candlelight collection! 🕯️✨&nbsp;Elevate your ambiance with the perfect blend of sophistication and functionality. This candlelight features a thoughtfully crafted base and clickable parts, allowing you to customize the lighting experience with a simple click.&nbsp;<figure class="table" style="width:60.76%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image image_resized" style="width:72.12%;"><img src="https://makerworld.bblmw.com/makerworld/draft/363440/2023-12-13_3362b75a341e.jpg"><figcaption>THEE 1</figcaption></figure></td><td><figure class="image image_resized" style="width:70.43%;"><img src="https://makerworld.bblmw.com/makerworld/draft/363440/2023-12-13_b8fa159a52546.jpg"><figcaption>THEE 2</figcaption></figure></td></tr></tbody></table></figure>&nbsp;🌟 Key Features:<ul><li>Clickable parts.</li><li>Elegant base for stability and a touch of refined aesthetics.</li><li>Crafted for versatility: Perfect for cozy nights, dinners, or as a unique decor piece.</li></ul>🕯️ Versatile Vibes:<ul><li>Set the mood.</li><li>Enhance your home decor with a stylish and functional accent.</li></ul>💡 LED TEA CANDLE:<ul><li>Do NOT use a real candle. Opt for an LED tea light for safety and ambiance. <a target="_blank" href="https://amzn.to/3RPRELj" rel="nofollow noopener">I bought my LED candle lights from amazon</a></li></ul>!! important notice: start building sphere 2 from the bottom to the top !!&nbsp;✨ Why Choose Our Candlelight?Because it's not just a candle—it's a customizable experience, tailored to your mood and style.&nbsp;&nbsp;Illuminate your space with our Interactive Candlelight—where sophistication meets simplicity in a click! 🌌🕊️&nbsp;&nbsp;<figure class="image image_resized" style="width:48.56%;"><a href="https://makerworld.com/nl/models/95559#profileId-101921" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/363440/2023-12-17_fa69024a84103.png"></a></figure>&nbsp;&nbsp;&nbsp;

Modern Candlelight Collection: Sphere

Candles

BODY3D

This waste really makes 3d printing sad ! So I created a little waste Eater to make it a little more joyful haha =)&nbsp;And of course, it is printable without supports !&nbsp;If you like these model, don't hesitate to like and follow =)&nbsp;IMPORTANT :&nbsp;If you want to sell 3D prints from my designs&nbsp;Please become a Patreon here : <a target="_blank" href="https://www.patreon.com/BODY3D" rel="nofollow noopener">https://www.patreon.com/BODY3D</a>&nbsp;Or Become a Triber here : <a target="_blank" href="https://www.myminifactory.com/users/BODY3D" rel="nofollow noopener">https://www.myminifactory.com/users/BODY3D</a>&nbsp;All my Links : <a target="_blank" href="https://beacons.ai/BODY3D" rel="nofollow noopener">https://Beacons.ai/BODY3D</a>