tim.sherrill

bestboi3d

6 color HueForge print of a Boy Scout montage

Boy Scout Montage

scouts

plucbernier

Simple cage for mobile photography or videography. You will need to provide a phone holder. all holes are threaded with 1/4 20 or 3/8 16 threads. Good for mobiles or small mirrorless cameras.&nbsp;See my other print «Phone Cage NATO handle» for a simple, compatible handle to fit the cage.

Cage for phone photograhpy or small mirrorless cameras

Photography

RP47 Designs

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;You can complete this print without an AMS. Use the profile that says NO AMS and it will pause at the correct height instead of doing a filament change. At that point you change your filament and let it continue until the next pause where it will wait for the next manual filament swap. This being a four color Hueforge, it will require three pauses with manual filament changes.&nbsp;&nbsp;Filaments Used: PLA+ Sunlu Black Transmission Distance: 0.6 PLA+ Sunlu Grey Transmission Distance: 2 PLA+ IIID Max Space Gray Transmission Distance: 5 PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Grey At layer #28 (2.32mm) swap to Space Gray At layer #34 (2.8mm) swap to White for the rest.

Stormtrooper Helmet Sign Hueforge NO AMS Needed

HueForge

Stevo99

Summary<ul><li>I added feet and additional thicknesses to <a target="_blank" href="https://www.thingiverse.com/LMF5000" rel="nofollow noopener">LMF5000</a>'s original design.</li><li>I also enlarged the original tile size</li></ul>Printing&nbsp;I sliced 3 different versions of the model.<ol><li>Normal size, my standard lithophane slicing presets (Print Time: 1H 45M)</li><li>Normal size, adaptive layer height (Print Time: 1H 6M)</li><li>Reduced size, adaptive layer height (Print Time: 0H 34M)</li></ol>

scouts

Photography

HueForge

Lithophanes