Tiberious

MenLoL

Enhance your workspace with this stylish and functionally designed Voronoi pattern pencil holder! &nbsp;The model can be printed without support; however, minor artifacts may occur. I used PLA, which is the recommended material for this project.

Voronoi Pen Holder 

Organization

KenPrint3D

Better scraper that I designed.. there are 2 version of it here, you can also choose to not have color if you wantthe toothed one was the idea of my friend Paul, thx paulThe Scraper also fits very well into the door handle :)&nbsp;Please Like and FOLLOW me for more :)<figure class="image image_resized image-style-side" style="width:26.02%;"><img src="https://makerworld.bblmw.com/makerworld/draft/783702/2023-12-23_ee80dea7f0fb4.jpg"></figure> I have to thank everyone for all the nice messages you wrote and the nice comments, all the nice pictures you uploadThanks to all of you. ♡ ♥💕❤ &nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Disclaimer: The use of the logo or character in this design is for illustrative purposes only and does not imply endorsement or sponsorship. All trademarks, logos and characters are the property of their respective owners. Any reference to specific brands is not intended to infringe upon or challenge the ownership rights of the trademark holders. I respect the intellectual property of all brands and/or characters mentioned or used in this design.

Bed Scraper 

Tools

πxel8ed

Started with designing a “ship in a bottle”. Ended up with this.&nbsp;Updates:<ul><li>1/20/2024: Updated model to double the strength of the webs. Check out the “V2” profiles.</li><li>1/16/2024: Uploaded a few tweaks to the Designer Profile (One, two, and three color versions) which enhance small details on the ship and improve print reliability</li><li>12/26/2023: Added “Optional Uplighting Kit” profile. It&#39;s a fast print, compatible with a variety of LED&#39;s and fits nicely. Makes the base of the model more significant so also a nice upgrade to add a contrasting portion to the base. Pick plate one or plate two depending on your preferred LED&#39;s:<ul><li>Plate 1: Fits the LED puck from the <a target="_blank" href="https://makerworld.com/en/models/13717#profileId-13429" rel="nofollow noopener">Bambu Labs LED Lamp kit</a>.</li><li>Plate 2: Allows the installation of a length of LED light strip (or fairy lights) of various types. If you&#39;re just getting started with custom LED installs <a target="_blank" href="https://youtu.be/exAWzMfmwQ8?si=8TnrTyI9Lngt3264" rel="nofollow noopener">check this video out</a>.</li><li>Plate 3: Includes a lens that fits in the model base to diffuse the light from the LED&#39;s. The Bambu LED is very bright so I prefer printing the lens in white or colored PLA rather than translucent.</li></ul></li></ul>The Designer Profile (One, two, and three color versions) supports all Bambu Lab printers. Just make sure the Designer Profile is selected in Bambu Handy, click Print, then select the plate you want. If you instead open it in Bambu Studio you may need to select your printer model at the top left dropdown and choose to transfer all settings before slicing and sending to the printer.<ul><li>One color takes ~7hrs</li><li>Two color takes ~8hrs</li><li>Three color takes ~24hrs!</li></ul>Big thanks to <a target="_blank" href="https://makerworld.com/en/u/319145709" rel="nofollow noopener">@zviratko</a> for figuring out a work around to make one color prints reliable.&nbsp;Suggestions on removing support material if it does not just pop off initially:First, be sure to let it cool down completely before attempting to remove the support. We want it to be stiff, not flexible.When removing the support; hold the ship portion of the model firmly with one hand, with the other hand use the biggest needle nose pliers you can to grab the support chunk from the bottom where it was attached to the build plate. Make sure you have a firm grip and twist the pliers clockwise/counter-clockwise then pull straight out. Take your time. Don&#39;t expect it to pop off in one go. You&#39;re just hoping to cause some cracking noises. Then move the pliers to a different spot and repeat the twist/pull to hopefully create some more cracking noises. You&#39;re trying to achieve the same effect as when you bend a paperclip back and forth until it breaks. Eventually the support will come loose, just be patient.&nbsp;Enjoy!

A long time ago in a galaxy far, far away....

Sci-Fi

TrendtB

Easily add labels to your Bambu Lab reusable spools, with a remaining filament estimator!Compatible with Make My Sign for custom labels.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/212190/2023-11-28_115305ad38652.gif"></figure>&nbsp;I absolutely love the Bambu Lab reusable spools, but you're either stuck with the original label, or have none at all.I also like the indicator on their labels that gives you an estimate of how much filament is remaining.&nbsp;So I designed this press-fit label holder for the spools!<h3>FEATURES</h3><ul><li>Indicator shows estimated remaining filament (200g, 400g, 600g, 800g)</li><li>Coloured zone for under 200g (a reminder to order more filament!)</li><li>Press-fit design snaps onto the spool</li><li>Compatible with AMS</li><li>Easily change labels for different materials</li></ul><h3>INCLUDED LABELS</h3>I've included many common material labels, all generated through Make My Sign.Just duplicate the labels you want from “Common Filamanet Labels” to the “Copy labels to print here” plate, and your project will remain organized.<ul><li>PLA</li><li>PLA Matte</li><li>PLA Tough</li><li>PLA Marble</li><li>PLA Metal</li><li>PLA Silk</li><li>PLA Sparkle</li><li>HTPLA</li><li>PLA-CF</li><li>PLA Aero</li><li>PLA Alu(minium)</li><li>PLA Steel</li><li>Polylite PLA</li><li>PETG</li><li>PETG-CF</li><li>ASA</li><li>ASA-CF</li><li>ABS</li><li>PA</li><li>PC</li><li>PA6</li><li>PAHT-CF</li><li>TPU95</li><li>Supp(ort) PLA</li><li>Supp(ort) PETG</li></ul>Label designs powered by Make My Sign from MakerWorld(<a target="_blank" href="http://makerworld.com/makerlab/MakeMySign" rel="nofollow noopener">makerworld.com/makerlab/MakeMySign</a>)<h3>MAKE YOUR OWN LABEL</h3>You can create your own labels in Make My Sign, as long as you use the following settings:<ul><li>Rectangle Base Plate, 1mm thick, 1mm corner radius, Hole: None</li><li>10mm Height</li><li>43mm Width</li></ul>I used Roboto font for the included labels at size 36. If you have a 0.2mm nozzle, I'd recommend using a smaller font if you want to fit more text on the label.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/212190/2023-11-28_8864da819adf2.png"><h3>MATERIAL CHOICE</h3>When choosing the material to print in, consider the environment your spool may be in.If you dry your materials, try to choose a filament that won't soften when your spool is in a dehydrator/heater.<ul><li>PLA is fine for PLA spools, and may be ok for PETG (not tested)</li><li>PETG and ABS are better for higher temp filaments.</li></ul>The example models used:<ul><li>Bambu Lab PLA Matte White</li><li>Bambu Lab PLA Basic Red</li><li>Bambu Lab PLA-CF</li></ul>&nbsp;<h3>REMOVAL</h3>If you want to remove the label holder for whatever reason, you can pop it off using a scraper. Wedge the blade underneath the holder and lift. If the pins break off, you can just push them through the holes in the spool using a small tool (e.g. hex key) and remove the debris.

Bambu Lab Spool Label - with indicator

X1 Upgrades

jarvizar

3d miniature of Seattle, Washington!&nbsp;Model created in Blender using the <a target="_blank" href="https://github.com/vvoovv/blosm" rel="nofollow noopener">Blosm</a> addon.&nbsp;Check out my collection of other miniature cities: <a target="_blank" href="https://makerworld.com/en/u/1935755220/collections/146964" rel="nofollow noopener">https://makerworld.com/en/u/1935755220/collections/146964</a>&nbsp;This model was designed to be printed with a 0.4mm nozzle and 0.16mm layer heights. Try using a 0.2mm nozzle (0.08mm layer heights) or scaling up for even finer detail!&nbsp;Note: If roads or other small details disappear after slicing, try lowering the extrusion/line width of external perimeters (outer walls) closer to 0.4mm OR use Arachne walls.&nbsp;Framing Details&nbsp;This model measures almost exactly 6.7in by 4.7in (170.5mm X 119.5mm) and should fit most 5x7 frames (assuming frame lip/overlap is around a quarter inch). Feel free to change the scale/size of the model(s) to meet your needs.&nbsp;Personally I use these cheap frames from Amazon: <a target="_blank" href="https://www.amazon.com/dp/B0C8HY7YSQ" rel="nofollow noopener">https://www.amazon.com/dp/B0C8HY7YSQ</a>And blue printer paper: <a target="_blank" href="https://www.amazon.com/Astrobrights-491618-Multipurpose-8-5-Inch-11-Inch/dp/B00006IDQT" rel="nofollow noopener">https://www.amazon.com/dp/B00006IDQT</a>&nbsp;I also included a fully printable frame (including a 1mm thick water plate) designed to fit all my miniature cities.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/478221/2023-12-27_7536c6348b762.webp"><figcaption>Gif of the Printable Frame</figcaption></figure>&nbsp;A frame is not required! This model looks great by itself and can be displayed almost anywhere.&nbsp;

Seattle Washington 3D Miniature

Josh-3D

[Intro]I would like to introduce to you my fancy Scifi Box! Or crate? Treasure chest? Do I need to model some gold coins for you to fill this thing up with? Hehe.&nbsp;I wanted to produce a crate of sorts that'd be larger than the print volume, but assembled in a way that it didn't feel like it was just a model chopped up to fit into a printer's build volume. This is the results of those efforts. Part of my goal with this too was to make it easy to print, have cool styling, and have some sort of latch/locking mechanism (although it is primitive, it is still cool). For bonus points, I made it stackable!&nbsp;[What you'll need]&nbsp;<figure class="image image_resized" style="width:37.91%;"><img src="https://makerworld.bblmw.com/makerworld/draft/683999/2024-02-09_b6ff735a9db58.png"></figure>Tools:Hex Driver #3 & #2.5Drill bits for clearing out holesFile for cleaning up edges where berm is used, or whatever tool you like for that job.&nbsp;Hardware:16 M4 Nuts (Used for connecting the End Caps, Ends, And Mid section together. 8 M4x25 (Used to connect the Ends to the Mid section) 2 M4x30 (Used for the hinge) 2 M3x5 (Used on the Lock. You can Use M3x6 screws, but don't over tighten them, as it'll push through and show on the front) 14 M4x10 (6 for the Lock, and 8 are used to connect the End Caps to the Ends)&nbsp;Filament I used: (For reference! Use the colors you see fit!)Mid - Bambu PLA Iridium Gold MetallicEnds - Bambu PLA Matte CharcoalHardware - Bambu PLA Basic Bronze   [Getting ready to print]You're going to need about 2kg of filament for this case. It'll be about 1kg for the ends, and a little less for the mid/lid section. I modeled everything to be relatively easy to print, but they're still big full plate models, so make sure you've got things like warping under control (On the P1/X1 for example, turning off the aux fan!), that your bed is super clean, and yeah. These are big prints, so let's check ourselves before we wreck ourselves, because a failed print here can be costly.&nbsp;There is a little post processing that should be done with the models once they're off the build plate. Holes will need to be cleared for where the screws go, as I modeled a flat plane in place to help keep them clean. Additionally, on the lid, you'll want to make sure a screw can insert into the hole freely, and use a drill to clear it out if need be.&nbsp;[Assembly]Let's get to it, shall we? We'll start with the lid. Make sure a m4 sized screw will fit freely into the hole. We don't want it super loose, but we shouldn't have to screw it in. <figure class="image image_resized" style="width:55.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/683999/2024-02-10_c9999fe6e110c.png"></figure>Next, we'll assemble the lock mechanism. Two M3x5mm screws are used as stops for turning the lock. You can use 6mm length screws, but be careful not to put them in too far, as it'll push out and blemish the front surface of the lid. For everything else, use M4x10mm screws.<figure class="image image_resized" style="width:55.83%;"><img src="https://makerworld.bblmw.com/makerworld/draft/683999/2024-02-10_41aad9dca556f.png"></figure>Now it's time for the body.&nbsp;1. Clear out the holes using a drill, so the screw can pass freely through.  (Planes were modeled in to help support the screw holes during printing)2. Inset 8 M4 nuts on either side of the mid section into the slots. &nbsp;<figure class="image image_resized" style="width:55.28%;"><img src="https://makerworld.bblmw.com/makerworld/draft/683999/2024-02-10_f1141dd059fd4.png"></figure>(Keep in mind these drawings show the assembly of one side, but both sides should be done at the same time)3. Make sure you clear out the holes with a drill bit, like we did in Step 1 for the main body.4. Now, we'll use M4x25mm screws to attach the ends to the main body. Do this for both sides.5. For the hinge, we'll use a M4x30mm screw, or longer. These are just pushed in, and to hold them in completely, we'll insert a plug/dowl to help keep them in place. Before you put the screw/dowl in for the lid, position the lid in place (This step is not pictured!). Make sure you're happy with the fit of everything before you secure the lid, as once you get the screws and plugs/dowls in, it'll be difficult to remove them.<figure class="image image_resized" style="width:59.3%;"><img src="https://makerworld.bblmw.com/makerworld/draft/683999/2024-02-10_0b45c572681a.png"></figure>6. The lid should be installed at this point, with both ends installed. From here we'll attach the end caps. Firstly we'll insert 4 M4 nuts on each end.<figure class="image image_resized" style="width:58.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/683999/2024-02-10_e51dd47e5aea7.png"></figure>7. We'll use 4 M4x10mm screws on each side, screwed into the holes inset into the bigger holes! Once we have all of those in, we'll cover them up with the end plugs. The slot in the plugs is sized to work best with a coin. <figure class="image image_resized" style="width:60.06%;"><img src="https://makerworld.bblmw.com/makerworld/draft/683999/2024-02-10_35cdd6dea4d61.png"></figure>That's it! Enjoy!&nbsp;-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you're looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information.

Organization

Tools

Sci-Fi

X1 Upgrades

Fun

Various