thortinton

Matthew Ghost

🔑Design your own key cover so you always know what the key is for🔑<ul><li>The default dimensions (Key_Diameter = 22.7 mm, Key_Width = 2.7 mm)  are intended for the normalized dimension of the key.</li></ul><figure class="image image_resized" style="width: 22.69%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497656/design/2024-06-16_dc4b4e4f5304a.png"><figcaption>Normalized dimensions of the key</figcaption></figure><ul><li>In the case of customizing your key cover size (Key Diameter, Key Width), it is always necessary to add clearance e.g. +0.4 mm!</li></ul>&nbsp;

Key cover | Key Caps | Key Tag | Label | Custom

Keys

Ryschweitzer

A Lord of the Rings book nook inspired by Bilbo&#39;s Hobbit Hole called Bag End.&nbsp;ASSEMBLY GUIDE ATTACHED

Lord of the Rings Bag End Hobbit Book Nook

Estanteria

Dr Operator

It's been quite some time since I've remixed a <a target="_blank" href="https://makerworld.com/en/@soozafone" rel="nofollow noopener">Lucky 13 toys</a> model. Soundwave is a character that I originally wanted to remix for Lucky 13 but I always seemed to have something else on the go, so I'm happy to have finally found time for it.&nbsp;&nbsp;&nbsp;NOTES:<ul><li>This model remixes the Dummy 13 armour only. You will still need to download and print a <a target="_blank" href="https://makerworld.com/en/models/183780#profileId-202639" rel="nofollow noopener">Dummy 13</a> frame.</li><li>In the profile, I had to use white as a colour because there was no option for translucent. I used translucent AMZ3D filament for Chest Door 2. The other filaments used were Bambu PLA tough Silver, Bambu PLA basic Gold, Bambu Matte PLA Marine Blue and Dark Red.</li><li>I haven't made any tapes for Soundwave yet, but I'll try and get some made soon.</li></ul>&nbsp;&nbsp;ASSEMBLY:&nbsp;You will need to download and print a full Dummy 13 frame plus two extra frame-abdomen-v6.stl. You need to add those extra abdomen parts to the shoulders as seen below. The picture on the left is a regular Dummy 13 frame and the picture on the right has the extra pieces added.<figure class="image image_resized" style="width:55.54%;"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_5d0c320ff4d408.png"></figure>&nbsp;&nbsp;Most of the Soundwave armour will assemble the same way regular Dummy 13 armour does, but there are just a few notes about the legs. Even though the leg plate fits snug onto the leg itself, I would still recommend using a bit of glue to help keep it on. The shin frame part will snap into place when inserted into the leg as seen below.<figure class="image image_resized" style="width:65%;"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_17ddc7c3b8c5f8.png"></figure>&nbsp;&nbsp;You will need to attach the knee to the thigh before attaching it to the shin.<figure class="image image_resized" style="width:45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_2d42afd426ac8.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_ae9d678e19cd1.png"></figure>&nbsp;&nbsp;TRANSFORMING:&nbsp;Transforming Soundwave is pretty easy. Start by removing the gun and mic, and put them aside for right now. Turn the head around 180 degrees and fold it downwards as seen below.<figure class="image image_resized" style="width:58.64%;"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_af19ceb4422cc8.png"></figure>&nbsp;&nbsp;Next, fold the arms all the way back and curl the hands.<figure class="image image_resized" style="width:49.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_beabae059e4d98.jpg"></figure>&nbsp;&nbsp;Once you have the arms and the head sorted, turn the legs so that the silver panel is facing forward. You will notice that there is a peg on the leg and a hole in the side of the chest. That will help keep it's shape when transformed.<figure class="image image_resized" style="width:61.23%;"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_942a9e949a956.png"></figure>&nbsp;&nbsp;Once you have the legs in place, the last thing you will need to do is attach the gun and mic. The mic fits into the back of the left leg and the gun fits into the back of the right leg.<figure class="image image_resized" style="width:61.47%;"><img src="https://makerworld.bblmw.com/makerworld/draft/755462/2024-03-23_3345fef53ddd58.png"></figure>

Dummy 13 skin: Soundwave

Dummy13

DGs 3D-PRINT

Schraubstock für keine Service arbeitenSchraubstock Klemmbereich von 0-60mmTischhalter Klemmbereich von 12-40mmMit und ohne TischhalterIch Empfehle es in PETG oder ABS, ASA zu Drucken. PLA habe ich nicht Getestet.Ich habe es in PETG von GEEETECH gedruckt im einer Schichthöhe von 0,12mm wegen der Passgenauigkeit der Gewinde.Ich Empfehle es auch mit einer Schichthöhe von 0,12mm zu Drucken.&nbsp;Neu 25.01.2024 Ein Dreibein für den Kleine SchraubstockDas Dreibein kann man einklappen um es leichter zu verstauen.Schraubstock ist mit Dreibein und Tischhalter kompatibelich Empfehle das Oberteil und Unterteil des Mittelteiles zu verkleben ist aber kein Muss.Ich habe das Dreibein in PLA Gedruckt In der STL Liste ist eine Datei mit dem Namen Fuß die Man in TPU aus Drucken kann. Ist aber nicht Erforderlich.Oder was Gummiartiges Ausschneiden und an die Beine Kleben als Antirutschbelag.&nbsp;Neu 05.02.2024Ein neuer Bügel für den Tischhalter mit ein Klemmbereich von 32-60mmDie anderen Teile vom Tischhalter bleiben die gleichen.&nbsp;Die Modelle sind nur für den persönlichen Gebrauch (nicht kommerziell) bestimmt.Geben Sie die Dateien nicht an andere weiter!Für individuelle Designs oder kommerzielle Lizenzen können Sie mich gerne kontaktieren.

Schraubstock

tools

FLOWERS GEAR

“Voyager1” refrigerator magnet  /  旅行者一号冰箱贴

Space

Skeptec Designs

*ONLY USE DESIGNER PRINT PROFILES. TWO PROVIDED PLA PRO/PETG*&nbsp;Tactical Door Stop/Multitool &nbsp;Optimized footprint. To Maximize the grip performance for holding the door in place, while on the other hand smoothly slipping in under the door when placed. If you want to add extra grip to the downside of the door stop you can use a rubbercoating. I tried the spray-on version of Plastidip and it works really great for this purpose available on <a target="_blank" href="https://www.amazon.com/3M-08883-Rubberized-Undercoating-19-7/dp/B000PEQGNQ/ref=sr_1_1_sspa?keywords=rubberized+plastic+dip&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1" rel="nofollow noopener">Amazon</a>. You can remove the coating easily if you don't like the result. Ribbed top. To hold the door in a firm and secure grip. Extra large hole (47mm diameter) with smoothly rounded edges to comfortably handle with 2 Fingers or even with gloves. Easy storage by hanging the doorstop over the door handle. So you have it at hand in a door stop/ self defense emergency. Easy to slide under the door. Even with a small gap to the floor, due to smoothly rounded tip and optimized design of the bottom of the doorstop. Suitable for ~5mm-40mm gaps without scaling. Wall and handle protector. Put it behind the door to avoid slamming the door against the wall. (Try it with the round end facing the door, too. Depending on the size of the handle and the trim on the floor this can give better results.) Can be used to keep windows open. Kid-safe. No sharp edges. Multitool/ Tactical self-defense tool. Hold it with two fingers using the hole and just think about it. If you know what a tactical pen is, you know what I'm getting at ;). And finally use it as door stop. This is what it is intended to be. And it works pretty well for this purpose.

Tactical Door Stop/Multitool

Windows&Doors

Websters Creations

Wall mount for 3D printed helmets it

Wall mount Helmet Holder

Helmet

Becks86

Bottle dryer These are bottle dryers that work for almost all bottles, whether it's a drinking bottle, a baby bottle, a military bottle, it should fit almost any bottle. You put the 2 parts together and it's done. Place the bottle on it and wait until the bottle is dry. At the end, just pull it apart again so it saves space and pack it away.&nbsp;Easy to print. Consumption of around 20 grams of filament per part.&nbsp;Have fun drying bottles.&nbsp;Your Becks&nbsp;____________________________________________________________________________________________________________________________________________________&nbsp;Flaschentrockner&nbsp;Dies sind Flaschentrockner der für fast alle Flaschen funktioniert egal ob Trinkflasche, Babyflasche, Bundeswehrflasche es sollte so gut wie jede Flasche passen. Man steckt die 2 Teile ineinander und fertig ist er. Aufstellen Flasche darauf und warten bis die Flasche trocken ist. Am Ende einfach wieder auseinanderziehen so ist es platzsparender und wegpacken.&nbsp;Einfach zu drucken. Verbrauch pro Teil etwa 20 gramm Filament.&nbsp;Viel Spaß beim Flaschen trocknen.&nbsp;Euer Becks

Bottle dryer / Flaschentrockner

Kitchen

Vixvvo 3D

I've created a desk drawer design before, and it received a lot of positive feedback. Building on that success, I've crafted a new version that features three separate drawers for organization! Attach it with double-sided tape or opt for drilling holes for a more permanent fixture. I'm open to hearing your ideas, so feel free to share them in the comments!&nbsp;&nbsp;All Commercial License, Will be available on my Patreon "Vixvvo3D" For a Low Price of 6$/Month. (currently trying to post & model 1/Weeks) <a target="_blank" href="https://patreon.com/Vixvvo3D" rel="nofollow noopener">https://patreon.com/Vixvvo3D</a>&nbsp;

Desk Organizer Drawer

Desktop

Kardes.Design

The Kiyomi Japanese Lamp is a sleek and stylish lighting fixture that embodies the essence of simplicity. Its interchangeable panels that are influenced by Japanese design, create a relaxing and beautiful ambiance, making it the perfect addition to any space.&nbsp;The <a target="_blank" href="https://makerworld.com/en/models/31480#profileId-33790" rel="nofollow noopener">panel template</a> is available for the community to remix as they wish. I will add more panels in the future as well.&nbsp;<ul><li>Effortless Printing: No support material needed for printing, making it a hassle-free experience.</li><li>Works seamlessly with <a target="_blank" href="http://shrsl.com/4k363" rel="nofollow noopener">Bambu Lab&#39;s LED lamp kit</a> and a generic LED strip.</li><li>Assembly Made Easy: Snap together with ease - no glue or extra hardware required.</li><li>Everything is printable on all Bambu lab printers including the A1 mini</li><li>Print profiles for Non-AMS and AMS users</li><li>Fully compatible with my <a target="_blank" href="https://makerworld.com/en/u/2706903410/collections/57878" rel="nofollow noopener">mystic lamp panels collection</a>. Dozens of panels available!</li></ul>Print instructions:colored AMS and Non-AMS 3MF Files with perfect print settings are available for all models!Main structureLayer height: 0.2Infill: 10%Bottom/top layers: 4Walls: 2&nbsp;I uploaded an alternate simple version in case you wanted a more basic look.<figure class="table" style="width: 62.82%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td>Default Stylized version</td><td><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-11-11_8cb6067ebbc09.jpg"></figure></td></tr><tr><td>Basic Version (The stylized top fits the basic version)</td><td>&nbsp;<figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-11-11_9a6bc6179ffd2.jpg"></figure>&nbsp;</td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Panels:&nbsp;Non-AMS VersionPrint the NON-AMS version print profile if you do not have the AMS. It has preprogramed Pauses for color changes. I made them only 2 or 3 colors per panel to make it easier. just start with white or another light color and end with black. You can choose the color in between.&nbsp;&nbsp;AMS Version&nbsp;Print directly with from the print profile and easily change colors. I separated each color change to a separate object.You can choose green for example instead of Purple by just changing the second layer object.&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-11-11_d5abd30b602c8.png">You can use 3 colors instead of 4 if you do not have different shades. In the examples below I only used <a target="_blank" href="http://shrsl.com/4k35g" rel="nofollow noopener">White</a>/<a target="_blank" href="http://shrsl.com/4k35k" rel="nofollow noopener">Purple</a>/<a target="_blank" href="http://shrsl.com/4k35q" rel="nofollow noopener">Black</a>. And <a target="_blank" href="https://shrsl.com/4k35g" rel="nofollow noopener">White</a>/<a target="_blank" href="http://shrsl.com/4k35u" rel="nofollow noopener">Green</a>/<a target="_blank" href="http://shrsl.com/4k35q" rel="nofollow noopener">Black</a>.<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-11-11_a6d00ec8974f.jpg">&nbsp;Colors used for other panels:<a target="_blank" href="https://shrsl.com/4k35k" rel="nofollow noopener">Bambu Lab PLA Sparkle Royal Purple</a><a target="_blank" href="https://shrsl.com/4k35g" rel="nofollow noopener">Bambu Lab PLA Matte ivory white</a> (Alternatively <a target="_blank" href="http://shrsl.com/4k35x" rel="nofollow noopener">Basic Jade White</a>)<a target="_blank" href="http://shrsl.com/4k362" rel="nofollow noopener">Bambu Lab PLA Matte Sakura Pink</a><a target="_blank" href="https://shrsl.com/4k35q" rel="nofollow noopener">Bambu Lab PLA Matte Charcoal </a>( Alternatively <a target="_blank" href="http://shrsl.com/4k361" rel="nofollow noopener">Basic Black</a>)&nbsp;Lighting:&nbsp;All pictures were taken with the <a target="_blank" href="http://shrsl.com/4k363" rel="nofollow noopener">Bambu Lab Led lamp kit 001</a>. It is perfect for the lamp and provides more than enough lighting.&nbsp;Print the LED channel if you don&#39;t have the Bambu lab LED kit.&nbsp;The channel can fit around a 2 meters. you do not need to cut the strip if its longer. instructions below.&nbsp;<figure class="table" style="width: 278.968px"><table class="ck-table-resized" style="border: 1px double rgb(179, 179, 179)"><colgroup><col><col></colgroup><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><a target="_blank" href="http://shrsl.com/4k363" rel="nofollow noopener">Bambu Lab LED lamp kit</a></td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-11-11_6ca67e2e24af1.jpg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-11-11_034b388203e19.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-11-11_26d242b5e773a.jpg"></figure></td></tr><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em">Generic LED strip( 2meters)</td><td style="border: 1px solid rgb(191, 191, 191); padding: 0.4em"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061878/design/2023-10-24_572427393436.gif"></figure></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Hi, I&#39;m a student and love creating functional and beautiful designs optimized for 3D printing.if you like my work consider supporting me with these options:<ul><li><a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=6VL4LD2NAJJ86" rel="nofollow noopener">Paypal</a></li><li><a target="_blank" href="https://www.buymeacoffee.com/KardesDesign" rel="nofollow noopener">Buymeacoffee</a></li></ul>

Kiyomi Japanese Lamp (Bambu Lab Led Lamp kit 001)

Lamps

Sevro

Simply print and wrap monkey with cables as you wish.It works with a cable with a diameter of about 3.5 mm, for example with a cable like in a telephone charger or a USB cable. If you want to use a larger cable you have to enlarge the monkey.

Cable monkey

Cable

Nils Kal

Battery Missle Launcher for AAA and AA batteries<ul><li>AA variant holds up to 20 batteries (10 per side)</li><li>AAA variant holds up to 34 batteries (17 per side)</li><li>The missle launcher can rotate 360°</li></ul>&nbsp;<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1693159323/draft/2023-08-24_0ldq9hlydgw8.gif"></figure>&nbsp;Assembly is pretty straight forward, just put all parts together like in the picture, may use a bit of glue. Dont use glue between the base and the pilot chamber so it can move freely.You will find the files for the AAA variant in the AAA folder.&nbsp;&nbsp;Happy printing!NK&nbsp;This work is licensed under the 'Creative Commons NonCommercial' license. Please do not sell any physical or digital copies of it.

Battery Missle Launcher - AAA and AA - rotatable

Batteries

martin.taichl

This is my Rocinante model which is supposed to represent the Rocinante ship as it featured in the very last episode of the season 6 of the show Expanse. It has CSL plating, railgun, PDCs and torpedo tubes. The model is 50cm long and has several features. - Retractable PDCs - Posable landing legs - Retractable Airlock cover - Extendable Air-bridge. - Attachable stand Model is once again a kit so you do not need a glue (with one exception described in the assembly video). I highly recommend to look at this video to know, how to assemble everything together: <figure class="media"><div data-oembed-url="https://youtu.be/M02tMysBd8A"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/M02tMysBd8A" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Rocinante from the Expanse

Ships

Meister Edel

As a family we have several KleanKanteen bottles.But after cleaning them they always stay a little wet inside and we had several issues with mold inside the Sportcaps.Until now we stored the Cap separated from the bottom. But with many of these bottles it got quite messy in the closet.So I designed this simple adapter to fix this problem. Now you can store the bottle with its cap and it should keep dryin.<h3> Print Settings</h3>Printer Brand:PrusaPrinter: <div>I3 MK3S</div>Rafts:NoSupports: <div>No</div>Resolution:200Infill: <div>100%</div> Filament: DC Plastics PLA GreenCategory: Organization

Klean Kanteen Bottle Dry and Organizer

Klean Kanteen

TripleGWorkshop

<figure class="media"></figure>Prints with no supports, slow down for best results. Rear door does not open.<figure class="image image_resized" style="width:62.5%;"><img src="https://makerworld.bblmw.com/makerworld/draft/119901/2023-10-25_ddwst9anot41.jpg"></figure>Also available: Original PIP Helicopter: <a href="https://www.printables.com/model/510524-print-in-place-helicopter-no-supports" rel="nofollow">https://www.printables.com/model/510524-print-in-place-helicopter-no-supports</a><figure class="image image_resized" style="width:65.49%;"><img src="https://makerworld.bblmw.com/makerworld/draft/119901/2023-10-25_qi1wq3mxtyjz.jpg"></figure>

Chinook Helicopter - No Supports - Print in Place

Toys

Astaroth

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLa SUNLU Black Transmission Distance: 0.3 PLA SUNLU Gray Transmission Distance: 2.5 PLA SUNLU Light Gray Transmission Distance: 3 PLA SUNLU White Transmission Distance: 6Swap Instructions: Start with Black At layer #4 (0.4mm) swap to Gray At layer #8 (0.72mm) swap to Light Gray At layer #13 (1.12mm) swap to White for the rest.

Hingry Vampire - Hueforge

Paints

DonMatis

Wolverine joins the Super-Hero week.&nbsp;Model is too complex to upload a printing profile, so please download the .3mf file from here and open it with Bambu Slicer&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used:<ul><li>PLA Overture Black</li><li>PLA PolyTerra Charcoal Black</li><li>PLA Overture Cement Gray</li><li>PLA+ Sunlu Gray</li><li>PLA BambuLab Basic Gray</li><li>PLA Overture Light Gray</li><li>PLA+ Esun Bone White</li><li>PLA Overture White</li></ul>Swap Instructions:<ul><li>Start with Black</li><li>At layer #10 (0.88mm) swap to Charcoal Black</li><li>At layer #12 (1.04mm) swap to Cement Gray</li><li>At layer #14 (1.2mm) swap to Sunlu Gray</li><li>At layer #18 (1.52mm) swap to BambuLab Gray</li><li>At layer #20 (1.68mm) swap to Light Gray</li><li>At layer #24 (2mm) swap to Bone White</li><li>At layer #28 (2.32mm) swap to White for the rest.</li></ul>&nbsp;<blockquote>Enjoy my work? Support me by joining my club on <a target="_blank" href="https://www.printables.com/@DonMatis" rel="nofollow noopener">printables</a>. Tier 1 offers exclusive models, while Tier 2 allows you to sell my 3D printed artwork.</blockquote>

Wolverine (fanart)

Wall Art

user_3257010834

My printing suggestions:Filament : ABS （When printing ABS, the room temperature can reach 50 degrees Celsius. Please try to choose materials that can withstand it.）Layer Height: 0.2Support : YesSupport Style : Tree SlimOn build plate only : YesRemove small overhangs : No （Otherwise the top of the sliding door track will collapse）Brim Type : Auto&nbsp;*Please be careful when cleaning the door support, it is easy to tear.&nbsp;The connector is not necessary. If you need it, you can download it here.https://www.printables.com/model/560887-over-engineered-bambu-lab-x1c-riser-with-shutter-d