thomasmerrick1

FiBaLi

Servus eggs in multiple sizes have fun with it&nbsp;&nbsp;

Egg XXL

Easter

XaioLTD

Vortex Planter The name might be confusing, it doesn't look like the vortex vase however they share one key feature that are the same hence the name. Also totally forgot how much I like this specific silk filament really a perfect fit for this! Will it hold water?You can seal the bottom with wood glue(The one for outdoor use) It's the easiest way. Make sure it gets in all corners and let dry, can take quite some time 48hrs.&nbsp;SizeIt's almost exactly 130x130x130, you will lose some effective size on the inside.&nbsp;Printed infoCreated in Blender. Printed with Bambu lab X1C, 0.4mm nozzle, 0.6mm line width, 0.2mm line height, vase mode. "Addnorth PLA Premium Silk (Green)" NoteAs of right now this is the only version available, I have an untested one with thick walls ready to be printed so perhaps before the weekend when the printing que clears up!&nbsp;

Vortex Planter

Planters

ChoCho

&nbsp;Did you like this model? Check out my entire collection! (and give me a like! :D)<a target="_blank" href="https://makerworld.com/en/u/1326665423" rel="nofollow noopener">https://makerworld.com/en/u/1326665423</a>&nbsp;Remember that you can resize/scale this model to fit the size you want. I always make the models in sizes of 40 x 40 or 80 x 80, but you can enlarge or shrink it according to your tastes :)&nbsp;You can share or modify my models, but please quote me and share my profile as a thank you for my work.&nbsp;You can sell my models. If you want me to make a personalized model for you, write a comment below and I will try to make it for you.&nbsp;

Leaf Earring

jewelry 

JamesThePrinter

***Christmas and Halloween Cases are identical - Just add your new scenes*** Light up different Christmas scenes in this display. An LED tea light candle is required. &nbsp;The display features a door that opens to allow access to the tea light. Use a section of 1.75mm filament inside the hinge to connect the door to the case. Depending on your printer/setup, this hole may be on the tight side or a bit loose. If tight, drilling out the hole may help. If it is slightly oversized, I suggest melting the end of the filament piece with a soldering iron or lighter.&nbsp;I have included a separate liner. This allows you to print the case in a dark color, but line the inside with a lighter color to allow for more reflection of light outward, making everything brighter.&nbsp;For a complete display, you will need:<ul><li>1x Case</li><li>1x Door</li><li>1x Knob</li><li>1x Snap Ring</li><li>1x Liner - Optional</li><li>1x (minimum) Scene - You can easily remove the snap ring to swap out scenes as desired</li></ul>Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;<h4>Print Settings</h4>No special setting are needed for the display case, door, knob, snap ring and liner. &nbsp;Scenes Print SettingsPrint the scenes with 100% infill. The scenes also require color changes:<ul><li>The bottom 3 layers <ul><li>white or clear</li></ul></li><li>The top 2 layers <ul><li>should be black for most scenes</li><li>Blue works well for the snowflake</li><li>If you have an MMU/AMS, other colors can be added as well</li></ul></li></ul>&nbsp;<h4>Assembly</h4>Glue the knob into the door. Only a very small amount is needed.<figure class="image image_resized" style="width: 535.5px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/c2ff42e5-4f47-41e8-8905-382ea68f6cfe.webp"></figure>Put the door in place and latch it. Use a 20mm piece of 1.75mm filament to connect the 3 sections of the hinge. If the filament goes in very easily, it may be a good idea to heat up the top end of the filament ‘pin’ and press it flat. This will prevent the pin from falling through later on.<figure class="image image_resized" style="width: 535.5px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/230e3f93-7a69-4e0a-8026-060800c5ea3a.webp"></figure>Open the door. Insert a scene into the opening (image facing outward). Insert the snap ring behind the scene by gently squeezing and placing it into the groove (see red arrow below).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/164034e6-1484-4bc7-a435-e0a956565206.webp"></figure>If you are using a liner, slide it inside the case. This may be a tight fit. Go slowly and be sure to slide it in evenly on all sides.<figure class="image image_resized" style="width: 535.5px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000041177/design/96f9e1cf-982a-4e8f-be08-881a51506e3b.webp"></figure>Turn on your tea light and close the door.&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The following filaments were used in the pictures above:Display Cases<ul><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Dark Green PLA</li><li>Bambu Lab Matte Dark Red PLA</li><li>Bambu Lab Silk Gold PLA</li></ul>Liners<ul><li>Bambu Lab Matte Ivory White PLA</li><li>Bambu Lab Basic Bambu Green PLA</li></ul>Scenes<ul><li>Bambu Lab Matte Ivory White PLA</li><li>GIANTARM Transparent Clear PLA</li><li>Bambu Lab Matte Charcoal PLA</li><li>Bambu Lab Matte Mandarin Orange PLA</li><li>Bambu Lab Matte Lemon Yellow PLA</li><li>Bambu Lab Matte Marine Blue PLA</li></ul>

Christmas Tea Light Display

Christmas 

MakeIt3D

<h2>Summary</h2>Tired of receipts, dust, and other debris clouding your workspace?This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings.This print features a fully functioning built-in swing allowing you to store items inside without things accidently falling out.This item is easy to print featuring 2 main files<ul><li>LID STL</li><li>Bottom STL</li></ul>Total Size of the product is roughly 6 inches Height, 3.5 inches Width, 3.5 inches Length.Feel free to print out the designs and share photos of your results. I would love to see them. All MakeIt3D Designs are made and designed in-house. When you purchase any of these designs you do NOT have the rights to sell the digital files or printed models. 3D PRINTING SETTINGS Printer Used: Bambu Labs X1 Layer Height: 0.2 Infill: 10% - 15% Honeycomb Print Speed: Slow Speed on First Layers Material: PLA Wall Count: 2 Walls

3D Printable Mini Trash Can for Car and Office Use

useful prints 

Sevro

InstructionPour water into model and make bird music :)Water level should be like on a picture or a little more.<figure class="image image_resized" style="width:387.047px;"><img src="https://media.printables.com/media/prints/444581/rich_content/df3ed6c0-28ff-431c-a50b-145af8c98ac3/thumbs/cover/800x600/jpg/img_20230406_203911.webp"></figure>If bird only whistle try tilt it forward. You have to find spot where water is bubbling by you blow. Different tone of tweeting is achive by tilting bird and strenght of blowing.VersionsThere are two versions of TweetyBird1. TweetyBird of normal size. It can produce a little different tones and a little different types of tweeting like on movie below. It is easy to make proper sound. However print time is about 1.30 h2. TweetyBird smaller by 50% of normal version. I had to make some adjusment to it work and proper print. It sound quite similar to normal size bird, but can produce only one tone of tweet and it is a little harder to make proper sound. However print time is only 30 min.PrintingPrinted with Prusa mk2: 0.6 mm nozzle, 0.2 mm layer height, filament: Print-me Ecoline, Plast-Spaw.PresentationAnd how it works.&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/xpk65SlGmp8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/xpk65SlGmp8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Have fun :)

Tweeting Bird

toys

thrutheframe

Update 22 April 2023I have made some minor edits to the design and also included the STEP file if anyone needs it to do some editing. All the best. &nbsp;<h4>INTRODUCTION</h4>The nozzle wiper on the X1/X1C is one of the most abused parts of the printer. Especially if you are printing multi-colours. It gets smacked left-right by a hardened steel nozzle. The PTFE tube gets scarred very quickly, making the wiping less efficient. Instead of throwing away after replacing it with one of the spares. You can straighten it up and replace the PTFE tube. The length needed is around 11.7 - 11.8mm. This is a small jig for cutting the tube (OD4mm ID2.5mm) to replace the used ones on the nozzle wiper.&nbsp;&nbsp;To date, my designs are free to download and use. There is no Patreon or OnlyFan (hahaha). If you like them and want to contribute to my coffee addiction & help fund the filaments I need for prototyping, a donation of $5-$10 to <a target="_blank" href="https://ko-fi.com/thrutheframe" rel="nofollow noopener">Ko-fi</a> or <a target="_blank" href="https://www.paypal.com/paypalme/shannonheng" rel="nofollow noopener">paypal.me</a> will be greatly appreciated. &nbsp;CaveatAs with all my designs, it may and may not work for you. So print and install at your own discretion. &nbsp;

Easter

Planters

jewelry

Christmas

useful prints

toys

Bambu tools