thomas.hunt8910

IndomReps

Milwaukee M18 Tool and Battery Mounts&nbsp;*** Update 1 - 10/28/2023 ***<ul><li>Revised tolerances of model so that fit is a little bit looser and releases from the battery a lot smoother.</li><li>Revised thickness of batteries mounting face so that the larger High Output batteries can be mounted flush to a surface without the battery interfering with the mounting surface.</li></ul>&nbsp;Tool mount will work with most tool types, intended to be underhung mount but can be side mounted if it suites a certain tool. The battery mounts will work with any M18 battery and can me mounted in any orientation as it uses the batteries locking mechanism to hold it into place. Use 2 #8 screws to attach them to whatever you want.&nbsp;I've printed these out of PLA and Pro PLA with no issues with strength but might want to use PETG or ABS if you want to use these in something like a work truck or other environment that might get really hot in warm weather.

Milwaukee M18 Fuel Tool & Battery Mounts

Market

gozer3228

My youngest is a fan of Pokémon so I thought I would make her something she can hang on her wall. It is based off my favorite Pokémon Game and my favorite Pokémon Squirtle who has evolved into Blastoise. I only have one AMS at the moment, so I had to separate the canons on their own plate since I am using 5 colors. If you have multiple AMS, then you can print the canons and Blastoise bust on a single plate. The cartridge of course will need to be printed on its own plate unless you resize the file and items. I've included two different Blastoise busts for you to print. One he is looking straight forward, and the other has him at an angle looking down. I didn't attach the cannons at the moment as I am using it for other decorations. Once done I will attach them.Once you have all the files printed, you would need to attach the bust and cannons however you want to on the cartridge. I would recommend trying a few placements first before finalizing the bust and cannons. I know the print says over 43 hours, but that is due to both busts being on the file and the cartridge. If you remove one of the busts, it will reduce the time. The cartridge takes about 16 hours as well as each bust. I used stock settings on my P1S, used 15% infill, and gyroid for the infill type. I did use adaptive layers on the top layers/mouth to slow it down to smooth out the face. If you have any questions or comments, feel free to leave them down below and I will be happy to help anyway I can.

Market

Stuff