themrketo

nicodeimos

Ring hole: 4.8mm.Model size: 33mm x 40mm x 3.2mm.Filaments: Bambu Lab Matte PLA (only 1 AMS needed).&nbsp;Please do not sell, copy, remix or distribute this model.<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=G5FK3QJJUSW8N" rel="nofollow noopener">Enjoying my models? Make a donation!</a>&nbsp;Likes, boosts, comments and prints help to support me and will be very much appreciated!Feel free to <a target="_blank" href="https://makerworld.com/en/u/2495159158" rel="nofollow noopener">contact me</a> for any information.&nbsp;This 3D model is a unique custom-made version inspired by the work of Universal Pictures and any brand/studio/production/trademark associated with it. I do not take credit for the original drawing.&nbsp;

Characters The Grinch keychain

Keychains 

3Dimension Customs

Happy Halloween! heres an Oogie Boogie with Jack Skellington LED light box.

Oogie Boogie and Jack Skellington LED Light Box

oogie Boogie 

Diru 3D

This Christmas, add a touch of mischief and fun to your decorations with our Grinch-themed light box! This light box is a tribute to Dr. Seuss' most iconic character, known for his dubious Christmas spirit.With its captivating design and a touch of Christmas sarcasm, it allows you to bring the Grinch's humor and quirky charm into your space. Light up the room with a mischievous glow that highlights the Grinch, his growing heart and other iconic elements from the story.Whether you're a fan of the Dr. Seuss stories or simply appreciate the Grinch's spirit that eventually melts away, this light box is a fun way to express your love for this adorably grumpy character. And the best part? Installation is simple; you can glue the pieces together easily and turn your decoration into a Christmas celebration with a touch of mischief. Get ready to bring some fun and laughter to your Christmas!" 🎄🤨🌟💡

Grinch Led Lamp

LED Signs

DarkSword Creations

Hello i created this holder for my esun filament dryer and Ikea Vesken system. i made the holder in a most compatible way with other brands&nbsp;You need tho choose in the plates selection if you want the holder in the right side or left side&nbsp;if you need other size just ask!

Ikea Vesken Filament dryer lateral holder

IKEA Rack

Nakozen

A wee Gingerbread House to sit on your desk or shelf, or loop a thread through the included holes in the roof to hang from a tree, or elsewhere! Designed to be printed with a pause-at-height colour swap! Though I'm sure you could just paint the details after printing with just one colour! EDIT: New V2 files for a tighter fit, a seamless folding roof! =================== Included is a Frameless variant for those uninterested in the sprue card format (refer to photos for assembly help). If the fit is too tight, I suggest setting outer walls to print first in your slicer. You can make it EVEN TIGHTER by increasing the Z-scale by 15%.Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit. Makes greatly appreciated, always glad to see them! Happy Printing!===================<h3>Interested in selling?</h3>All files are marked as non-commercial along with any remixes created from them, however licenses are available via Ko-Fi and Printables Clubs!If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships, or Printables Clubs!

Gingerbread House Kit Card

Card Models

Magic Studio 3D

"Groot 3D Model" 🌱 Bring the heartwarming charm of the Guardians of the Galaxy into your living space with this stunning Groot 3D model! Inspired by the beloved character, this intricately designed piece will add a touch of intergalactic wonder to your decor.&nbsp;Bambu Studio Settings: The settings are just a recommendation, however you can print with the settings you are already used to using! • Preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 • Quality → Wall generator → Arachne • Quality → Wall transitioning threshold angle → 50º • Strength → Advanced → Infill/wall overlap → 20% • Quality → Advanced → Avoid crossing walls • Increasing retraction / reducing temperature can help reducing wisps • I recommend always starting with the lighter colors. Recommendations before and after printing:&nbsp; • Use textured PEI sheet • To make the hole for the USB cable input for the LEDs, you can do it with a soldering iron, drill a hole or you can do it with a slicer by adding a negative model in the place where you want to make the hole • For the pieces to give more light, I recommend using aluminum tape on the inside of the back cover • Be careful to clean the table well&nbsp;Materials and tools used to assemble parts:&nbsp; • Aluminum Tape for the back cover • Hot glue pistol to place in the spacing of the LEDs so they don't come off • Soldering iron to make the hole for the USB cable and/or to solder the LEDs with the USB cable with ON/OFF switch • White or RGB LEDs&nbsp;To find out the list of all the components I use, you can click on the link in my description, and you will find it in the first post!

Groot Lightbox LED Lamp

Characters

Bambu Lab

This is an official component set by Bambu Lab for the A1 printer. The AMS lite Top Mount setup is a tested solution for mounting the AMS lite on top of the A1 printer.&nbsp;The component set consists of two main modules:<ol><li>Top Mount Bracket</li><li>Z-Axis Stiffener</li></ol>The Top Mount Bracket is meticulously designed to be tilted to the front for better balance. Additionally, the upper half of the bracket can spin left and right, providing easier access to the back spools.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000092486/design/2023-12-14_ceeb9c0ed0a76.jpeg"></figure>&nbsp;The Z-axis Stiffener is designed to dampen back-and-forth printer movements. Thanks to the special elastic damper design at the bottom, there is minimum wobble even when printing in ludicrous speed with AMS lite fully loaded.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000092486/design/2024-04-23_cafcdb16e7224.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000092486/design/2024-04-23_4980ec2ffcf67.jpg"></figure>&nbsp;AssemblyHere is a tutorial video for the installation:<figure class="media"><div data-oembed-url="https://youtu.be/RmZOgrcDiRQ"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/RmZOgrcDiRQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;You can also buy the required hardware as a kit from here:<a target="_blank" href="http://store.bambulab.com/products/ams-lite-top-mount-screws-kit" rel="nofollow noopener">http://store.bambulab.com/products/ams-lite-top-mount-screws-kit</a>&nbsp;&nbsp;&nbsp;&nbsp;

AMS lite Top Mount for A1

AMS LITE

Filamaze

Hi,&nbsp;Sunlu/Geeetech spool don't work with the new AMS lite so I made my own adapter for them ! Easy to print !this will make all your sunlu/Geeetech spool work on the AMS LITE ! &nbsp;**UPDATE V3** now print fast since its shorter and easyer to print !&nbsp;Enjoy printing :) &nbsp;If you like this model, please like it, rate it and follow me ! If you have any recommendation I will update it with different version number :) &nbsp;Go see all my other work ! &nbsp;Thank you

Sunlu/Geeetech AMS Lite Adapter ** UPDATED  **

Spool Adapters 

Socal3d

Cat Toy Spinning Ball In Circle

Katie Suter _ Meowgi

MFDesigns3D

San Fransico 49ers LED Lightbox.Be sure to check out my other models!

49ers LED Lightbox

49ers

dohara1985

A quick print, stackable Painters pyramid to keep your paint items raised with a small point of contact. I've included to sizes. Roughly 46 mm tall and 23 mm tall.23mm tall - 0.17 meters - Roughly 5 min print46 mm tall - 1.22 meters - Roghly 30 min print

Painter Triangle (pyramid) quick print, stackable

Home Tools

Christmas X-mas

Star Wars

JDJDJD

<h3>Meet the ProClip!</h3>The ProClip Filament Clip is a pleasure to use and easy to print.&nbsp;ProClip has a built-in handle that works in coordination with a clamping tunnel to manage and secure your filament.<h3>NEW! ProClip V2 features:</h3><ul><li>A extra durable clamp inside the tunnel.</li><li>Symmetrical input holes work for right handed and left handed users.</li><li>Handle flange provides good control and a comfortable grip.</li><li>A Low Profile option designed for tight storage containers.</li></ul>&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000030298/design/2023-09-30_0e45d041d5e2.gif"></figure>&nbsp;<h3>BENEFITS:</h3><ul><li>No Supports</li><li>No Overhangs</li><li>No Brims</li><li>Designed for FDM Printing</li><li>Free to Download!</li></ul><h3> </h3><h3>UPDATES:</h3><ul><li>10/06/23 ProClip V2 Released</li></ul>&nbsp;<h3>TIPS:</h3><ul><li>MUST be printed on side</li><li>Printer tolerances vary. If your ProClip is running tight just slide a piece of filament back and forth to break it in a little bit.</li><li>Glue stick can help condition the print bed for proper adhesion/release and is recommended.</li></ul>&nbsp;<h3>NOTES:</h3><ul><li>ProClip can be used commercially, but can’t be resold.</li></ul>&nbsp;<h3>TESTED PRINT DETAILS:</h3>ProClip has been built around the following conditions.<ul><li>Glue Stick: Yes (without is at your own risk)</li><li>Support: Disabled</li><li>Walls: 2</li><li>Brims: No</li><li>Nozzle: 0.4mm</li><li>Layer Height: 0.2mm</li><li>Infill: 15% Gyriod</li></ul>

ProClip Filament Clip

Filament Stuff

Dingus Dude

To be sure you're always downloading the most up to date file, use my “DD” profiles. See changelog below for detailed updates.&nbsp;BetterBoxPrint In Place Double Storage Customizable Divider Parts BoxNot just for Bambu Lab parts! Makes a great jewelry box, too!&nbsp;This is another version of my Print In Place Hinged Box and part of my BetterBox series!Check out the rest of the lineup below to find the ones that fit your needs!<figure class="table" style="float:left;width:35%;"><table class="ck-table-resized" style="border:2px solid hsl(0, 0%, 100%);"><colgroup><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/45645#profileId-47422" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-28_e2af4207409738.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/45645#profileId-47422" rel="nofollow noopener">Customizable Dividers</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/22697#profileId-20609" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-27_f53e9d31a992f8.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">Original Bambu Parts Box</a></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/45918#profileId-47727" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-27_50d65c4b44a158.jpg"></a></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"><a target="_blank" href="https://makerworld.com/en/models/22697#profileId-20609" rel="nofollow noopener">BetterBox</a> <a target="_blank" href="https://makerworld.com/en/models/45918#profileId-47727" rel="nofollow noopener">Empty Storage Box</a></td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;-Now back to the box that you came here for-&nbsp;FEATURES:&nbsp;Print In Place Hinged Box&nbsp;Compartments:<ul><li>Fully customizable! Use all the included dividers or print any of the ones you want plus more. Whatever you want to store, this box can accommodate. Please share how yours is arranged! There are litterally HUNDREDS of variations! Mix and match divider colors to help organize!</li></ul>Flip Top Lid:<ul><li>Allows for double the storage! The Flip Top prints on a separate plate and is super easy to install. When the Flip Top snaps closed it sits tight to the top dividers so even the tiniest screws won't fall out or move to another compartment! In short, your parts STAY where you put them!</li></ul>&nbsp;Flip Top Installation:<figure class="table" style="float:left;width:50%;"><table style="border:2px solid hsl(0, 0%, 100%);"><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/377353/2023-10-31_5a34a1d06579c.gif"></figure></td></tr><tr><td style="border:2px solid hsl(0, 0%, 100%);"> </td></tr></tbody></table></figure>&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;Box Dimensions175mm length107mm width (not including hinge and latch)61mm height (closed)&nbsp;&nbsp;&nbsp;Of course it's not necessary but if you want to add to my <a target="_blank" href="https://paypal.me/davebarbier?country.x=US&locale.x=en_US" rel="nofollow noopener">beer fund</a> it would be much appreciated! 😄&nbsp;

BetterBox - Flip Top Storage Box

storage box

"Mickey Mouse 3D Model" 🐭✨ Step into the magical world of Disney with this delightful Mickey Mouse 3D model! Inspired by the beloved icon, this intricately designed piece will add a touch of classic charm and enchantment to your surroundings.&nbsp;This model does not yet contain the step file, so to import it into Bamboo Studio, you just have to select all the STLs and drag it to Bambu Studio!<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/244744/2023-10-27_6aa316784592c.png"></figure>&nbsp;Bambu Studio Settings: The settings are just a recommendation, however you can print with the settings you are already used to using! • Preferences (ctrl + P) → activate developer settings → Quality →Advanced → First Layer Flow Ratio: 1.04 • Quality → Wall generator → Arachne • Quality → Wall transitioning threshold angle → 50º • Strength → Advanced → Infill/wall overlap → 20% • Quality → Advanced → Avoid crossing walls • Increasing retraction / reducing temperature can help reducing wisps • I recommend always starting with the lighter colors. Recommendations before and after printing:&nbsp; • Use textured PEI sheet • To make the hole for the USB cable input for the LEDs, you can do it with a soldering iron, drill a hole or you can do it with a slicer by adding a negative model in the place where you want to make the hole • For the pieces to give more light, I recommend using aluminum tape on the inside of the back cover • Be careful to clean the table well&nbsp;Materials and tools used to assemble parts:&nbsp; • Aluminum Tape for the back cover • Hot glue pistol to place in the spacing of the LEDs so they don't come off • Soldering iron to make the hole for the USB cable and/or to solder the LEDs with the USB cable with ON/OFF switch • White or RGB LEDs&nbsp;To find out the list of all the components I use, you can click on the link in my description, and you will find it in the first post!

Mickey Mouse Lightbox LED Lamp

Disney 

BamBam Design

Nice little Compartment for the great Bambulab “Marble Run Kit”<ul><li>The Box has space for 10+X marbles.</li><li>It fits under the screw/nut and could clamped there.</li><li>The lid can be closed and hold the marbles secure</li><li>The hinge is Print in Place, no tools needed</li><li>Little neat Podium included ;)</li></ul>Happy Printing and enjoy! 😉👍I hope you like the parts and it would be great if you follow me!&nbsp;Check out my other Marble run Kit tuning files as well:Battery Box: <a target="_blank" href="https://makerworld.com/models/71213" rel="nofollow noopener">https://makerworld.com/models/71213</a><a target="_blank" href="https://makerworld.com/models/71213" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/242306/2023-11-22_fcd9e6062ee92.png"></a>Better Y-Part: <a target="_blank" href="https://makerworld.com/models/52635" rel="nofollow noopener">https://makerworld.com/models/52635</a><a target="_blank" href="https://makerworld.com/models/52635" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/242306/2023-11-22_58cb6882010e7.png"></a>

Compartment Box for Marble Run 003 kit

Marble Run

cwills75

***Update 2*** Another user reported that this extension cable works with the AMS Lite to extend it if you do not want to make your own: <a target="_blank" href="https://www.aliexpress.us/item/3256802718701254.html" rel="nofollow noopener">https://www.aliexpress.us/item/3256802718701254.html</a> ***Update 1*** I've uploaded a new angled wall mount as I had requests for one. Depending on which direction you mount it, the PTFE tubes will either angle up or down slightly. I have some pictures uploaded with it mounted at an upward angle. This does move it out a little over an inch further from the wall, which was necessary to make sure all of the spools cleared. The mounting holes, TPU gasket and TPU cable channel do not change, so if you have already printed/mounted the non-angled one, you can use the same gasket, cable channel and mounting holes as the first one if you want to switch. This is a wall mount for the Bambu A1 Mini AMS Lite. It doesn't require the original AMS Lite stand to save space and make a more clean design. The main wall mount uses four screws on either side to connect the AMS Lite to. The original stand only uses two screws per side, but it has holes for four. All eight holes are untapped and when you insert screws, it will self-tap threads into the plastic, just as the screws that Bambu supplies for this purpose do. The walls of the mount have also been increased in thickness from the original stand, so the stock screws Bambu supplies are too short. This thickness increase adds much more rigidity to the stand. There is a 3mm thick gasket that is the size of the base of the wall mount, designed to be printed in TPU and placed between the mount and the wall. This is to help reduce any vibration from the AMS Lite being transmitted into the wall, along with some slight strain relief. Finally, there is a cable channel piece that should also be printed in TPU, which is then inserted into the bottom of the mount. You can then press-fit the AMS Lite cable into this channel, which will keep it out of the way from possibly catching on your spools. The AMS Lite can be mounted upside-down, and you will have to do that if you don't make/purchase an extension cable, as the cable is very short. Ideally, you should obtain or make an extension cable, allowing you to mount the AMS Lite in the proper position so the numbers are right-side up, and then the AMS spool slots will correspond correctly in the Bambu Studio slicer and A1 AMS screen. With the AMS Lite mounted correctly, the cable will come out of the top, feed through the center of the wall mount and then down through the cable channel. I have been playing with the vertical placement of my AMS Lite, along with the distance of it to the A1 Mini to see how much I can shorten the PTFE tubes without having any issues. I have had limited success with printing some harder shore TPU from the AMS Lite, but if in doubt, mount it higher than I have mine in the pictures and don't cut your PTFE tubing. Like I said, I'm still experimenting and don't mind buying some extra PTFE tubing as it is cheap. Just make sure wherever you mount it, each AMS slot can reach the A1 extruder head in all positions it can move (left to right, and up and down). You should also use some common sense regarding wall mounting your AMS Lite. It isn't terribly heavy, even when loaded with four full spools. A full spool is roughly 2.2 lbs, so the entire assembly with the wall mount, AMS Lite and spools is probably 12-13 lbs total. Ideally, the wall mount can be mounted into a wall stud, but even if mounting in drywall, relatively basic drywall anchors are capable of holding around 40-50 lbs. Still, if mounting in drywall, I would recommend heavy duty drywall anchors for piece of mind. Most local hardware stores sell drywall anchors that can individually hold well over 100 lbs. For print settings, it doesn't really matter much how you print the TPU pieces. I wouldn't print them with very high infill, maybe like 10-15% so they still have some squish to them. The cable channel piece should fit snugly in the hole of the wall mount. I cannot predict all the materials, profile settings and ambient temperatures of everyone's setup, so giving you exact settings on printing the wall mount for the best strength is something you should work out for yourself. I would recommend using a PLA+ or Pro or Tough filament, which is a lot stronger than basic PLA. I made mine with PolyLite PLA Pro with 50% infill, slower speeds and low fan speeds to increase layer bonding. Obviously the faster you print things, and the more fan that you use, the weaker your parts are. If in doubt, do some test prints of cylinders and then try snapping them in half to see what settings you are happy with. Bambu's PLA Tough is very similar to PolyLite PLA Pro, and would also be a good choice. PETG would also be a good choice, and I have had many garage tools, jack stands, hose mounts, etc., made with PETG hanging in my garage for years with no issues. For mounting the AMS Lite to the wall mount, you will need eight #4 x ½" pan head sheet meal screws. To mount the wall mount to the wall, #10 x 1 ½" screws are recommended for mounting in wall studs. If you are mounting in drywall, use your best judgement based on my advice above. Unfortunately, the biggest issue with wall mounting this is the short AMS Lite cable length. I ended up using these parts to make my a cable. I had everything on-hand except the male/female connectors, but I will post links for everything required if you were to build a cable from scratch and do not have any of the other parts. The connectors are Molex Micro-Fit 3.0 2x2. They are cheapest on Aliexpress, but you can get them faster from Amazon here: <a target="_blank" href="https://www.amazon.com/dp/B078Q798L9" rel="nofollow noopener">https://www.amazon.com/dp/B078Q798L9</a> There may be crimpers that are cheaper, but this is the pair I have and used to crimp the connectors onto the wires: <a target="_blank" href="https://www.amazon.com/gp/product/B00YGLKBSK/" rel="nofollow noopener">https://www.amazon.com/gp/product/B00YGLKBSK/</a> Most thin wires you have on-hand will probably work, as the AMS Lite doesn't send much voltage/current through. I used this: <a target="_blank" href="https://www.amazon.com/gp/product/B07G2LRX68/" rel="nofollow noopener">https://www.amazon.com/gp/product/B07G2LRX68/</a> If you would like to make your cable look nice and clean/professional, I would also recommend some braided sleeving: <a target="_blank" href="https://www.amazon.com/dp/B07FTN4VSP" rel="nofollow noopener">https://www.amazon.com/dp/B07FTN4VSP</a> And some heat shrink tubing for the two ends: <a target="_blank" href="https://www.amazon.com/gp/product/B0B1D19LVW/" rel="nofollow noopener">https://www.amazon.com/gp/product/B0B1D19LVW/</a> I have an image uploaded that shows the correct pinout for the extension cable ends. If you've never crimped connectors like this before, there are some Youtube videos such as this one that shows the basic process: <figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=D1ErLvXlOTs"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/D1ErLvXlOTs" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure> Alternatively, Molex sells male-to-male and female-to-female pre-wired Micro-Fit 3.0 cables, and they have various distributors that also sell them such as Digi-Key and Mouser Electronics. This would probably be the easiest method to extend your AMS Lite cable if you are not used to creating your own cables connector ends/wires. You can go to Molex's site here: <a target="_blank" href="https://www.molex.com/en-us/part-list/cable-assemblies?taxonomyPathValueLast=Power+and+Signal+Cable+Assemblies&physical_circuitsLoaded=4&materialMaster_promotable=true&physical_numberOfRows=2&productNameList=Micro-Fit+3.0&page=2&general_connectorToConnector=Micro-Fit+3.0+Both+Ends" rel="nofollow noopener">https://www.molex.com/en-us/part-list/cable-assemblies?taxonomyPathValueLast=Power+and+Signal+Cable+Assemblies&physical_circuitsLoaded=4&materialMaster_promotable=true&physical_numberOfRows=2&productNameList=Micro-Fit+3.0&page=2&general_connectorToConnector=Micro-Fit+3.0+Both+Ends</a> And look for the parts you would like, and see what distributors show stock in your location. Molex makes 150mm, 300mm and 600mm cables, and as you will need a M-M and F-F cable and then plug them into each other to create a M-F extension cable, your total cable length would then be 300mm, 600mm or 1200mm. They also sell versions with tin-plated or gold-plated connectors. I made my extension cable about a foot and a half (450ish mm), and have no issues with the AMS Lite operation. As with anything electrical, the longer you extend a cable, and the more adapters/connectors from the source to the target, you have the possibility for more cable resistance, resistance based heat, signal loss, etc, so Vulcan logic would dictate to use the shortest extension cable length necessary for your application. ;) Once everything is printed and an extension cable is made, installation is easy: 1. Determine where you are going to mount the AMS Lite, ideally on a wall stud. 2. Place the TPU gasket or wall mount vertically on the wall and mark the two mounting hole positions. 3. Drill appropriately sized holes in the wall/studs. 4. Place the TPU gasket between the wall and the mount and use two screws to mount the wall mount to the wall. 5. Place the AMS Lite into the wall mount (a helper is useful here for an extra hand or two), and feed the AMS Lite cable through the wall mount, then insert all eight screws, securing the AMS Lite to the mount. 6. Insert the TPU cable channel piece into the bottom of the wall mount, pull the AMS Lite cable taught and press-fit the cable into the TPU piece. 7. Attach the AMS Lite cable to the extension cable you made, and plug the extension cable into the A1 Mini.

Bambu A1 Mini AMS Lite Heavy Duty Wall Mount

Nightmare before Xmas

Tailored3D

Hold onto your knitting needles for this one. I took a little creative license on my decorative pumpkin series to make something a little more “spooktastic” for Halloween. This Knitted Jack-O-Lantern was printed on my X1C with AMS using Elegoo orange PLA, Ziro black PLA pro, and Polymaker Wood Brown PLA. 15% lightening infill with painted on tree supports at 0.16 layer height. The model can be scaled to desired size and you can fit two on a built plate at the 5" tall default size if desired. I recommend calibrating your filament prior to printing and testing flush volumes to ensure no bleed through is seen. You can also print in 1 color and paint which may end up being faster. The stock STL and colored 3mf file are available for download. Let me know what you think and Happy Halloween!!

Decorative Knitted Jack-O-Lantern

Pumpkins 

Panda63

For all those who do not want to be without your X1C. You can take it to work, or on vacation or to the office. The print head is movable. Only the base needs support. All other parts can be printed without support. The fan and the logos need a drop of glue to hold them. I printed the case with silver colored PLA filament and it looks very nice.

X1 Carbon model 1:5

Mini

Char-ly

Test for bridging, overhangs, frame/rail/belt alignment/tightness.

BestTest - Test Your Printer Setup

Test Prints

LayerModels

<h4>Create your own name in 3D!</h4>The file contains the complete alphabet in the standard font. Print the letters you need and snap them together. Don't forget to print the endcaps to complete your nametag.You can even use the letters to print your own message or slogan.&nbsp;Other fonts are available <a target="_blank" href="https://cults3d.com/en/design-collections/LayerModels/3d-letters" rel="nofollow noopener">here</a>&nbsp;<a target="_blank" href="https://cults3d.com/en/design-collections/LayerModels/3d-letters" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/364477/rich_content/68da15ea-d698-41a1-8dbf-c369975fbdd6/thumbs/cover/800x1208/png/overview-fonts.webp"></a>If you like my work please consider supporting me by downloading one of these cool fonts for less than the price of a coffee, thanks!&nbsp;Print settings&nbsp;The 3D letters were tested in PLA with 0.2mm layer height. Print in the given orientation and no support is needed. Ensure a good first layer adhesion with sufficient bed temperature and slow first layer speed. Avoid elephant footing.&nbsp;----------&nbsp;Subscribe to <a target="_blank" href="https://patreon.com/LayerModels" rel="nofollow noopener">my patreon</a> if you are interested in a license to sell your prints commercialyFollow me on <a target="_blank" href="https://www.instagram.com/layermodels/" rel="nofollow noopener">instagram</a> to stay up to date with my latest 3D Models

3D Name from letters - Standard font

Kids Room Stuff

TechJeeper

Forget the sugary sweets for Halloween, be the “cool house” on the block and give out some amazing fidget toys! A fun gyroscope gear fidget. The inner part is gyroscopic and the outer gear spins.Check out my other designs for more styles of this fidget!I printed mine at .16 layer height with 15% infill with AMS.

Gyroscope Gear Fidget - Halloween Spider

Fidget Spinners

BODY3D

Juste a cute Ghost !Print it without supports =)&nbsp;Video : <a href="https://www.tiktok.com/@body3d_/video/7151361561372691717" rel="nofollow">https://www.tiktok.com/@body3d_/video/7151361561372691717</a>

Ghost Booh

Halloween 

ShakaStudio

&nbsp;Print at 100% infill with a layer height of 0.16mm with a base layer of 0.24mmFilaments Used: PLA+ Creality CR Black Transmission Distance: 0.5 PLA+ IIID Max Night Gray Transmission Distance: 0.8 PLA+ Creality Orange Fluorescent Transmission Distance: 3.6 PLA+ JAYO Meta White Transmission Distance: 6Swap Instructions: Start with Black At layer #5 (0.88mm) swap to Night Gray At layer #6 (1.04mm) swap to Orange Fluorescent At layer #10 (1.68mm) swap to White for the rest.

Halloween Mansion - 4 Color Hueforge Filament Painting

Hue Forge

Williams Industries

I have added all plate types to fit whatever need you have. I have also created the key ring that it is for earrings or a keychain to be removed so you can also make it as a pin. If you do make a pin, I would paint the backside a solid color as to save on filament. These also make a great magnet. These are a great blast from the past.&nbsp;We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>

McDonalds Halloween Buckets (keychain, earring, pin, coaster, magnet)

McDonald's 

woodward.landscapes

quick design to keep the kids happy while waiting for the motor to come in stock

marble run manual handle turning mod (v2 now with improved clip in moving handle)

Charlie toys 

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014265/design/2023-09-19_8d08d601f168.png"></figure>Let&#39;s start a marble race with friends! This marble run features a series of elements including elevator, starting line, randomized dividers, elevated track, large funnel, spiral, and loop section. It allows competition of multiple marbles, with each segment introducing an element of unpredictability. The excitement continues all the way to the end!&nbsp;Recommended filaments: Bambu PLA series, PLA Basic is recomended for more smooth track<a target="_blank" href="https://store.bambulab.com/collections/bambu-lab-3d-printer-filament?gf_60645=279355719795" rel="nofollow noopener">https://store.bambulab.com/collections/bambu-lab-3d-printer-filament</a>Hardware Kit: Marble Run Components Kit-003<a target="_blank" href="http://store.bambulab.com/products/marble-run-components-kit-003" rel="nofollow noopener">http://store.bambulab.com/products/marble-run-components-kit-003</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the video tutorial step by step to print and assemble your build. <figure class="media"><div data-oembed-url="https://youtu.be/8_Su9jdzgNA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/8_Su9jdzgNA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Marble Run 003

Bambu

Coasters

Picture_it

I made this in Fusion 360. I used battery operated fairy lights on wire (a set of 20 from Amazon) and glue dots (zots) on the back to hold the lights in place. 3 Pieces, the front, back and base to sit on.

Mickey Pumpkin Light Box LED Lamp Halloween

Mickey Mouse

Black Glovz

Halloween Lego Head Pack&nbsp;Instructions:1 x Head 1 1 x Head 2 1 x Head 3 3 x Cap&nbsp;Please use led candle light and not a normal one as you will burn down your house.