thelunatikk

fsprock

REMIX Original from <a target="_blank" href="https://www.printables.com/de/@ChrisK_1555906" rel="nofollow noopener">Chris K. | Printables.com</a>&nbsp;Text from Chris K.For ease of use, I have added two versions with a Handle. There is one with a 12.5mm recess in order to fit over the axle nut directly and a slightly more stiffer version with no recess. &nbsp;I relaxed / changed my print settings and can confirm that it works very well for me in PLA with 0.16mm layer height, 6 outter walls and top and bottom layer minimum 1.5mm, 15% infill. &nbsp;I also flipped the model to the correct side teeth facing upwards as suggested below. &nbsp;Print time is approx. 50mins on my P1S&nbsp;The model was designed to tighten a chainring on my home trainer Garmin Tracx by hand. Its not designed for tightening with tools, however I can add a hexnut instead the grip, if requested. &nbsp;I printed this tool in ASA with following parameters: 4 wall perimeters 6 top and 6 bottom layers 15% infill (adaptive cubic) Arachne generator for walls on my P1S with 0.4mm nozzle and 0.20mm Layer height. &nbsp;The model prints in 8m42s, weights 3.31 gramms and costs about 7 cents

Shimano lock ring tool remove rear cassette chainr

bike

trixs3D

I added a model without holesWithout supports

Knitted cat / pencil holder

misc

make 3D

This riser adds 18.5mm to the top glass height. This does help some with the “filament pull out error” as the PTFE tubes is not bend by the glass.&nbsp;This riser design allows for a LED strip to be installed with 3D printed diffusers for a softer light.&nbsp;Benefits of this design:<ul><li>Soft inner corners allows the LE strip to follow along without any sharp bends. And no soldering is needed.</li><li>The riser is designed so you can install 4 diffusers so the LED strip does not shine too hard.</li><li>The design of the riser does not need any support for printing. (no additional clean-up is needed)</li><li>All parts snap perfectly together and does not require screws or glue.</li><li>All 4 main parts are labeled with numbers to ensure an easy assembly.</li><li>No Support material is needed - the riser only needs assembly.</li></ul>&nbsp;My riser are printed in:SUNLU PLA+ BlackGEEETECH Matte PLA White&nbsp;For P1S users: you can just use a regular USB LED strip with the USB port next the the screen. (inside the printer)&nbsp;When installing the diffusers, make sure you assemble them in the correct orientation.The two long cutouts on the diffusers should be on the front of the riser:<figure class="image image_resized" style="width:42.03%;"><img src="https://makerworld.bblmw.com/makerworld/draft/501591/2023-12-19_6fa5cbffef518.png"></figure>LicensingAll my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.For some designs it is possible to buy a individual license for a fixed fee. Please contact me for any details regarding this.&nbsp;How to Support MeIf you like my designs, please give them a ‘like’ as this helps the model being more visible to other users.Also please consider donating via <a target="_blank" href="https://www.buymeacoffee.com/make3d" rel="nofollow noopener">https://www.buymeacoffee.com/make3d</a>  All support is highly appreciated!&nbsp;UPDATE 21-12-2023:I have changed the design of the front panels for it to fit the P1P model - I was informed the P1P was a tiny bit smaller and the original riser would not fit.I have not tested this myself, but got the dimensions from another user.&nbsp;UPDATE 24-12-2023:I have added a hole on the back left side for wiring to external power supply. This is mostly for all X1C users.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/501591/2023-12-24_66023a61afd7d8.png"></figure>UPDATE 26-12-2023 (Version 4):I have changed the hole shape so you are able to wire a USB plug or power supply without having to solder any wires.<figure class="image image_resized" style="width:61.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/501591/2023-12-26_a3eb603bd25768.png"></figure>