Great print and used a slow speed and best layer height I could for highest quality.

Great print and the Profile I used appears to have been adjusted to include elephant foot to create a wider surface and a better fit.

Super low weight solution and needs some care removing. Ideally print on a textured build plate and allow to cool for an easy removal. I had some size issues, printing it appeared slightly small for my P1 and I had to make adjustments.

great little print. I printed on a smooth build plate with a new filament and probably could have cleaned up the visual surface given a bit of extra time

I like a lot! I printed in PLA as a bit of a test, but fully expecting to print again when I start needing to use more advanced engineering materials in the future.

Printed copies at once as these are great, but appear more of a disposable item with the edge damaging quite easily and mine needing the corners trimming before first use.

great lid design and like the attempt at retaining features. Perhaps consider removing the logo as its not as clean as the logo built parallel to the bed and the main tool has a different size logo already! It would have been great if it could have had softer edges, like the main scraper! I might attempt a remix and credit you!

Great print using free PLA Basic material. would have loved the top surface to have rnded up flush with the main body and then would’ve debossed the logo-but performance is great!

Printed 2 scaled and 1 at full size on a smooth plate! The result looks great on a black background using the white matte pla! In my setup the top surface wasn’t as perfect as the build plate surface, so i’ll just flip them over to present the best surface!!

Great part and will stay in my bike toolbox now! I even printed a second modified version as my Trek with an e*thirteen chain ring is slightly different. I now have a couple of versions based on a great design! Boosted!!🚀

Great little print and very quick to produce. I was surprised my filament wouldn’t push in-but when threaded in from the end it does pull out away from the face easily. I think its the perfect sizing-and the remover works perfectly too!

Excellent print and no post processing required. Fitted nicely in the Bambu Spool and with an air gap. Perfect for me

printed brilliant! super clean print to allow smooth motion-but unfortunately didn’t take a photo to show. printed with free PLA supplied with P1S

really pleased. perfect for our need!