theAMAZINGPauli

marekzeman91

<h3>Jose el Cactus!</h3>&nbsp;<h4>Gorgeous low poly model with cap, sombrero and glasses.</h4>&nbsp;Assembly of static parts:<ul><li>glue one Joint between Base_top and Base_bot</li><li>glue one Joint between Cactus_no_eyes/Cactus_w_eyes and Mustache</li></ul>&nbsp;Assembly of dynamic ports:<ul><li>glue one Joint to Cap/Sombrero</li></ul>&nbsp;Assembly of glasses:<ol><li>temporary: use BOTH sided tape and Cactus_no_eyes so you can take the Glasses down when you don't want them anymore</li><li>permanent: use 2x Joint, Glasses and Cactus_w_eyes and glue it together</li></ol>&nbsp;Tip: If you don't want the Cap/Sombrero and the Cactus_no_eyes/Cactus_w_eyes moving, just glue it together … heh

LowPoly Jose el Cactus

Funny Stuff

MEAF designs

Easy to print and fun to make!perfect for your candy table, coffee table or any corner of your house&nbsp;&nbsp;Specially designed to fit in the buildplate of any mid size printer.The base is one piece. and every letter is a separated file so you can print it in different colors if you want to.&nbsp;there are a couple of accesories to personalize as you like: -spider and spiderweb-witch hat (to print in multicolor just add a “filament change” at height in your slicer)-witch broom&nbsp;just print them and glue them on top! <img src="https://media.printables.com/media/prints/303320/rich_content/172ab3e6-1b61-40a9-8498-f4536890476e/9e803eff-7369-4b17-93d4-d01349663ff5.gif#%7B%22uuid%22%3A%225dca924b-d91f-47a5-988e-dde55ca77721%22%2C%22w%22%3A640%2C%22h%22%3A640%7D"> &nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,24 mmPrint time: about 7 hours total for all plates Nozzle diameter: 0,4mm or 0,6mmInfill: 10-12%Perimeters: 2Supports: no&nbsp;Printing Tipthe tolerances are a little tight, so make sure you don't have "elephant foot” in your printer to get them to fit right. if you can't avoid it then you just have to scrape or sand the base of each letter a little to make it fit.&nbsp;You can see my other models here:<a target="_blank" href="https://www.printables.com/social/281168-dgoalva/models" rel="nofollow noopener">dgoalva | Printables.com</a>

Halloween Boo Sign

Halloween Deco

MakeIt3D

<h2>Summary</h2>Tired of receipts, dust, and other debris clouding your workspace?This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings.This print features a fully functioning built-in swing allowing you to store items inside without things accidently falling out.This item is easy to print featuring 2 main files<ul><li>LID STL</li><li>Bottom STL</li></ul>Total Size of the product is roughly 6 inches Height, 3.5 inches Width, 3.5 inches Length.Feel free to print out the designs and share photos of your results. I would love to see them. All MakeIt3D Designs are made and designed in-house. When you purchase any of these designs you do NOT have the rights to sell the digital files or printed models. 3D PRINTING SETTINGS Printer Used: Bambu Labs X1 Layer Height: 0.2 Infill: 10% - 15% Honeycomb Print Speed: Slow Speed on First Layers Material: PLA Wall Count: 2 Walls

3D Printable Mini Trash Can for Car and Office Use

useful things

Easy to print and fun to make!Perfect for your candy table, coffee table or any corner of your house&nbsp;&nbsp;Specially designed to fit in the buildplate of any mid size printer.The base is one piece. and every letter and details are separated files so you can print it in different colors even without an AMS.&nbsp;Designed two styles for every “O”. so you can choose what you like.<ul><li>First "O": choose between santa claus or tree ornament</li><li>Second “O”: choose between snowman face or snowman body</li><li>Third “O”: choose between reindeer or christmas elf</li></ul><figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_n84evi4tipld.gif"></figure>&nbsp;split the "Details" file in to parts with your slicer and just print the details you like for each one and glue them on top!<figure class="image image_resized" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/user/1795494732/draft/2023-09-02_o1xtzxx4tz4i.png"></figure>&nbsp;&nbsp;&nbsp;Print SettingsMaterial: PLA / PETGLayer height: 0,28 mm for letters and base. --- 0.2 for detailsNozzle diameter: 0,4mm or 0,6mmInfill: 10 -12%Perimeters: 2Supports: no&nbsp;Printing Tipthe tolerances are a little tight, so you will need some glue depending on your printer and/or filament calibration&nbsp;&nbsp;&nbsp;

Christmas hohoho Sign

Christmas Deco

Jorge Rui

<h4>Description and contextualization</h4><blockquote>A present to you, a Rack for the Mutil-Modular Storage System (MMSS) that I've been developing. Don't go running to buying a ton of filament, first you must understand how this work....You can do it step by step.You can start with a simple model, and store it in your closet, some drawer, or card box; a month later, you may buy something else and print the corresponding module to store your precious component or accessories. Someday, you may need a box or maybe a case (if you have to transport your things) to store the modules you already have…In the limit, some people, need a complete rack, because they have a lot of things (maybe a print farm).But this rack, on its own, has the Build plate dispenser, and for most people, this project ends there. But you are like my, and make things scalable and that's why this is all modular.</blockquote><h3>Introduction</h3>This rack serves as a support to the different projects carried out around what I can already call an ecosystem, namely; <ul><li><a target="_blank" href="https://www.printables.com/model/556159-multi-modular-storage-system-mmss" rel="nofollow noopener">Multi-Modular Storage System -MMSS</a> </li><li><a target="_blank" href="https://www.printables.com/model/557727-box-with-lid-for-mmss" rel="nofollow noopener">Box with lid for MMSS</a></li><li><a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for the MMSS</a></li></ul><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_yakhnxubxzta.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_h8ksq5b2vafv.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_opyjqt3vl1be.jpg"></figure></td></tr><tr><td><a target="_blank" href="https://www.printables.com/model/556159-multi-modular-storage-system-mmss" rel="nofollow noopener">Multi-Modular Storage System -MMSS</a> </td><td><a target="_blank" href="https://www.printables.com/model/557727-box-with-lid-for-mmss" rel="nofollow noopener">Box with lid for MMSS</a></td><td><a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for the MMSS</a></td></tr></tbody></table></figure><ul><li>The amount of modules you can add is growing fast:<ul><li><a target="_blank" href="https://www.printables.com/model/557566-mmss-2x4-module-glue-stick-and-hexagonal-keys" rel="nofollow noopener">MMSS 2x4 Module - Glue Stick and Hexagonal Keys</a></li><li><a target="_blank" href="https://www.printables.com/model/557452-mmss-1x1-module-microsd" rel="nofollow noopener">MMSS 1x1 Module - MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/557397-mmss-1x1-module-nozzle-wipper" rel="nofollow noopener">MMSS 1x1 Module - Nozzle Wipper</a></li><li><a target="_blank" href="https://www.printables.com/model/557390-mmss-1x1-module-filament-cutter-microsd" rel="nofollow noopener">MMSS 1x1 Module - Filament Cutter + MicroSD</a></li><li><a target="_blank" href="https://www.printables.com/model/570948-mmss-1x1-module-filament-cutter" rel="nofollow noopener">MMSS 1x1 Module - Filament Cutter</a></li><li><a target="_blank" href="https://www.printables.com/model/559405-mmss-1x2-module-hotend-and-silicon-sock" rel="nofollow noopener">MMSS 1x2 Module - Hotend and Silicon Sock</a></li><li><a target="_blank" href="https://www.printables.com/model/561092-mmss-1x3-module-complete-hotend" rel="nofollow noopener">MMSS 1x3 Module - Complete Hotend</a></li><li><a target="_blank" href="https://www.printables.com/model/561215-mmss-2x3-module-small-scraper" rel="nofollow noopener">MMSS 2x3 Module - Small Scraper</a></li><li><a target="_blank" href="https://www.printables.com/model/564616-mmss-2x5-module-liquid-glue" rel="nofollow noopener">MMSS 2x5 Module - Liquid Glue</a></li><li><a target="_blank" href="https://www.printables.com/model/563208-mmss-various-size-modules-pocket-with-lid" rel="nofollow noopener">MMSS various Modules - Pockets with Lid</a></li><li><a target="_blank" href="https://www.printables.com/model/580675-mmss-2x3-module-spool-holder" rel="nofollow noopener">MMSS 2x3 Module - Spool Holder</a></li><li><a target="_blank" href="https://www.printables.com/model/567939-mmss-1x5-module-original-bambu-lab-scraper" rel="nofollow noopener">MMSS 1x5 bambu lab original scraper</a></li><li><a target="_blank" href="https://www.printables.com/model/618034-mmss-2x4-module-pocket-with-lid-for-bolts-and-magn" rel="nofollow noopener">MMSS 2x4 Bolts and Magnets Pockets with Lid</a></li><li><a target="_blank" href="https://www.printables.com/model/686267-mmss-2x2-module-extruder" rel="nofollow noopener">MMSS 2x2 Module - Hardened Steel Extruder Unit</a></li><li><a target="_blank" href="https://www.printables.com/model/613965-bambu-lab-ams-service-and-spares-parts-for-the-mms" rel="nofollow noopener">MMSS for AMS Modules</a> <ul><li>4x Active extrusion wheel assembly;</li><li>4x Active support shaft assembly;</li><li>4x PTFE Tube Fast Connector;</li><li>4x Driven Support Shaft Assembly</li><li>1x First Stage Feeder</li></ul></li><li>More to come… I'm always adding new modules, please check <a target="_blank" href="https://www.printables.com/@jorge_rui" rel="nofollow noopener">my profile </a> and here on <a target="_blank" href="https://makerworld.com/pt/u/3059492201" rel="nofollow noopener">makerworld.com</a> for the later information, some are free, others are only available as exclusives for members of "<a target="_blank" href="https://www.printables.com/@jorge_rui/exclusive-models" rel="nofollow noopener">my club</a>".</li></ul></li><li>This rack adds now support for the build plates.</li></ul><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_028behu1ai4g.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_r0t2wpt4b0hc.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_iynsbv28k7qz.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_e0zdl1u2l61m.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_0xxhhupg1j68.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_b96wxyl4ivi0.jpg"></figure></td></tr></tbody></table></figure>… and more<h3>Assembly info</h3><blockquote>Read carefully the explanation that fallows. I've tried to be systematic for anyone to understand. This os not a print of a small toy or a vase, you will need to make decision, so make them informed.</blockquote>1- Start here - Assemble the base that will serve the build plates. if you have many you can stack them together. 1.1 - All you need, and more, is available withing the file “rack_lower_module.3mf”.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_90fcltoa6t1b.png"></figure>2 - Now you have a choice to make: 2.1 - Stop here on the basic module for the build plates, or; 2.2 - continue to add other parts from the MMSS ecosystem.If MMSS = 2.1 then; You will need a cover like this to finish the job, you will find that part on the 3mf file regarding the rack for build plates<figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_v5wp6a6k3st9.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_6wmgn4kaqu97.png"></figure>Tip:For the <a target="_blank" href="https://shrsl.com/4cpnz" rel="nofollow noopener">PETG </a>springs, flex the back plate a little for them to slide on the dovetail. <figure class="image image_resized" style="width:75%;"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_cg9pvea3vxof.png"></figure>If MMSS = 2.2 then;<ul><li>you can add other rack for build plates, if really like build plates :) or;</li><li>add a MMSS box or case, or several of them. </li></ul> 2.2.1 Ok, you need to add more modules on top of the “Base module" that serves the build plates. Now you can choose to continue with the barebone or the complete version.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_xvcygijnz78z.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_dgrggf1uh6w5.jpg"></figure></td></tr><tr><td>2.3 - Barebone rack</td><td>2.4 Complete rack</td></tr></tbody></table></figure>If MMSS = 2.3 then;2.3 Barebone RackIf you go this way, you will need some new parts that you can find on the 3mf file “rack_middle_modules.3mf”.<blockquote>This drawing will help you choose the right heights for the spacers, almost all the parts are the same for any modules you choose, with the exception of the top.</blockquote><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_ezkcpjon3vvn.png"></figure>Easy, isn't it? ;) 2.3.1 There are some parts that you will need to go up, in what I call, the middle steps. These parts can be found on the 3mf file stated on 2.3 point. You can stack modules on top of each other, most parts are the same, just be careful to choose the “Pillars” A, B or C depending on what you need, these will give you the space necessary for each module (see drawing above).&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_max8ix3ip37e.png"></figure><blockquote>See does red pins? They have to go with a tight fit, if you notice them loose on the guides or on the Pilar’s see if the filament is calibrated, sometime, certain materials shrink more than others, petg tends to be more stable… anyways if all fails, use the scale tool on the slicer to compensate.</blockquote> 2.3.2 At some point you will reach the top, and you will need to close the rack top.<figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_mzlwingfk9g9.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_572cuaywt1k1.png"></figure></td></tr><tr><td>2.3.2.1 - Normal top</td><td>2.3.2.2 - Top made with the lid from the Box for the MMSS</td></tr></tbody></table></figure> 2.3.3 After choosing the top, you can print the corresponding modules from the “rack_tops_modules.3mf”.If MMSS = 2.4 then;2.4 The complete rack - This will add some panels to the side of the rack, making it look like this:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_kft5olj06k4q.jpg"></figure><blockquote>The aspect may vary depending on the modules you have chosen on the previous steps.</blockquote> 2.4.1 You can see that you will need different panels depending on the height of the modules, something very similar to the situation of the Pillars A, B and C.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/354238/2023-09-18_qren5ivpbsnu.png"></figure>To print this, you must choose what you need on the file “rack_lateral_panels.3mf”<blockquote>If you have the “<a target="_blank" href="https://www.printables.com/model/556615-case-for-the-mmss" rel="nofollow noopener">Case for the MMSS</a>” with the lower Lid for the PTFE tubes, use the “Cover E”If you plan to use the case with lid in one of the middle stages, you should use Pillar C and a new Cover; Cover F (Cover lateral panel_F.step)</blockquote>Material to use<ul><li>If you use this affiliate links to buy filament, it will cost you the same and I will get a small "kickback". Thanks !<ul><li><a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&u=4026304&m=138211&urllink=&afftrack=" rel="nofollow noopener">Filament used on this project</a>, choose any color you like. For the greatest result and if your printer can do it, use <a target="_blank" href="https://shrsl.com/4cvrd" rel="nofollow noopener">PLA with carbon fiber</a>, amazing finish! Maybe it is time to test that sample you may have received with your printer (X1C users).</li><li>I've used in this project some <a target="_blank" href="https://shrsl.com/4cpnz" rel="nofollow noopener">PETG </a>too.</li></ul></li></ul><h3>Change log:</h3><ul><li>19-09-2023 - change the diameter of the TPU feet for better fitting. If you already have them, just put a little of TPU filament on the side if you find it to lose. </li><li>21-09-2023 - Better layout of the “rack_lower_module.3mf” file . Thanks to <a target="_blank" href="https://www.printables.com/@amateur3d_939146" rel="nofollow noopener">Amateus3D</a></li><li>22-09-2023 - Back_plate_narrow has now stronger “pegs”. File changed “rack_middle_modules.3mf”. Thanks to <a target="_blank" href="https://www.printables.com/@hoonu_203988/makes" rel="nofollow noopener">hoonu</a>.</li><li>22-09-2023 - Lateral panels pegs should be stronger now. Change to some aspects of the layout on the 3mf file.</li><li>24-09-2023 - Small change to the small pin diameter, for stronger fit. File changed “rack_middle_modules.3mf”.</li><li>01-10-2023 - Added a new panel if you decide to use the box with lid in one of the middle stages (see description above in 2.4.1) - Thanks to <a target="_blank" href="https://www.printables.com/@thedevilsjeste_18993" rel="nofollow noopener">thedevilsjester</a></li><li>10-10-2023 - Some members(1) reported some instability of the structure, namely the configuration that presents the top the “normal top” and already has some modules, so already with a certain height. This update is intended to address those issues. Thus, the updated components are:<ul><li>rack_tops_modules.3mf - in there the steps updated are:<ul><li>Top_plate_for_back.STEP</li><li>Top_plate_for_front.STEP</li><li>Top_plate_for_Front_right.STEP</li><li>Top_plate_for_Front_left.STEP</li><li>Top_plate_for_BPlate_right.STEP</li><li>Top_plate_for_BPlate_left.STEP</li></ul></li><li>If the structure is ok to you, that's because the fits are ok and all is working fine.</li></ul></li><li>12-10-2023 - Bambu Lab logo was inverted, this can be found on file: “rack_tops.3mf” <ul><li>A new version of the pin was added that may offer a better fit in some situations. This new pin is found on file: “rack_middle_modules.3mf”</li></ul></li><li>18-10-2023 - Added a lid for the plain drawer: “lid_simple_drawer.step”</li></ul><h4>Support the designer:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.buymeacoffee.com/designrepcom" rel="nofollow noopener">buymeacoffee </a>or <a target="_blank" href="https://www.paypal.com/donate/?business=BUM67EMDJRXSN&no_recurring=0&currency_code=EUR" rel="nofollow noopener">PayPal</a>.

Funny Stuff

Halloween Deco

useful things

Christmas Deco

Usefull Printer Stuff