Fits good

I don’t know what I’m looking at. How does it do that.

I printed in Translucent PETG because it’s the only PETG on hand. It helps well and snaps in nicely.

Printed okay quality. One color because I’m not printing for 35 hrs. I use it for the non-poop junk like the lines or supports

It works. I wish it was a little less wide so the pliers don’t have to fully open to fit.

It is fun to play with and high quality. I turned off supports because my first print the supports were stuck

It fits well and looks really good

It fits well

It printed and prints way above what i expected. I used pink and blue to make a bubblegum color

ahhhhh oo oo ah oo ah, oo oo ah oo ah oo, EEAAAH, ahhhhh oo oo ah oo ah, oo oo ah ah oo ooh 🔥 I shrunk them down 50% and more to scale compared to each other. The quality was okay

It printed and prints well. I used pink and blue to make a bubblegum color.

I made diy two color filament and it fits perfectly on this. There are some very tiny unnoticeable supports that need to be removed in order for it to lock. Edit: Doesn’t work in AMS

Perfect and looks good. It fits perfectly but some buttons needed sanding because the holes were too small. Otherwise it is very nice

Very sturdy but the controller connect and usb port is blocked

I moved my Xbox outside of the cabinet and need a dust cover. This looks really good. Cone came out rough though.

It’s very large

Printed very well

I printed at the normal size but no .2mm nozzle like the description says so it’s less detailed

I made the AMS version 100% but I don’t have a .2mm nozzle so it’s not as detailed but it looks very good.

Very nice looking but the lower hanging plate needed pliers to connect.