tejawood

chemistinlab

<p><strong>Overview</strong></p><p>This stackable storage box is a <strong>print-in-place model</strong> and does not require additional hardware. Print the lid assembly and the box and follow the gluing instructions below to complete this model. Inside the box are different organizers that can be used for screws, electronics, or other accessories you may have.</p><p>&nbsp;</p><p><strong>Available Sizes (See print profiles)</strong></p><ul><li>4&#34; x 3&#34; x 1.5&#34; (small version)</li><li>8&#34; x 5&#34; x 1.5&#34; (large version)</li></ul><h4>Optional Accessories <strong>(See print profiles)</strong></h4><ul><li>TPU gasket available in both sizes</li><li>Adjust gasket thickness by scaling the Z height in Bambu Studio.</li></ul><p><strong>Materials and Printing</strong></p><p>Any materials such as PLA or PETG will be suitable for this model.</p><ul><li>2-3 walls</li><li>10% gyroid infill</li><li>Tree support enabled (needed for the box)</li></ul><p><strong>Assembly</strong></p><p>Required materials</p><ul><li>Lid</li><li>Box</li><li>Super glue, epoxy, or hot glue</li></ul><p>Instructions</p><ul><li>Follow the gluing instructions in the graphic</li><li>No tools are required.</li></ul><p><img src="https://makerworld.bblmw.com/makerworld/draft/791917/2024-01-14_977eeb4a2ee13.png"></p><p>&nbsp;</p><p><strong>Check out other models</strong></p><figure class="table" style="float:left;width:64.19%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><p style="text-align:center;"><a target="_blank" href="https://makerworld.com/en/models/173048" rel="nofollow noopener">Pill Shape Organizer</a></p><p style="text-align:center;">Print-in-place pill organizer</p></td><td><p style="text-align:center;"><a target="_blank" href="https://makerworld.com/en/models/173556" rel="nofollow noopener">Pocket Sized Pill Case</a></p><p style="text-align:center;">3 day pill organizer</p></td></tr><tr><td><figure class="image image_resized" style="width:90.68%;"><a href="https://makerworld.com/en/models/173048" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/791917/2024-02-05_18709291beed2.png"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/173556" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/791917/2024-02-05_099a37b7e6dd1.png"></a></figure></td></tr><tr><td><p style="text-align:center;"><a target="_blank" href="https://makerworld.com/en/models/146492" rel="nofollow noopener">Mars Rover Desk Organizer Kit</a></p><p style="text-align:center;">Desktop decorative organizer</p></td><td><p style="text-align:center;"><a target="_blank" href="https://makerworld.com/en/models/395814" rel="nofollow noopener">4 Way PTFE Splitter Adapter</a></p><p style="text-align:center;">AMS and external spool adapter</p></td></tr><tr><td><figure class="image"><a href="https://makerworld.com/en/models/146492" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/791917/2024-01-18_e76b4f736ca0c.jpg"></a></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/395814" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/791917/2024-03-25_898eeadc41d8d.png"></a></figure></td></tr></tbody></table></figure><p>&nbsp;</p>

Stackable Organizing Box (No Screws)

Storage and Organization

JC_Offroad (AKA - JeeperJC)

<p>Custom keychain for off-roading Toyota TRDPro&#39;s! This keychain is an easy print, print with .2 Nozzle due to fine details and size. Manually painted text.</p><p>&nbsp;</p><p>Print Settings:</p><p>.2 Nozzle</p><p>.10 layer</p><p>No supports needed</p><p>Iron all top surfaces</p><p>15% infill with Adaptive cubic pattern</p>

Toyota TRDPro Traction Board Keychain

Auto Stuffs

austinvojta

<blockquote><h3>Buy a printed cube from me directly: <a target="_blank" href="https://austinmakes.etsy.com/listing/1614801206/textured-fidget-infinity-cube-3d-printed" rel="nofollow noopener">AustinMakes.etsy.com</a></h3></blockquote><p>The latest and greatest fidget cube that you won't be able to set down! Prints in one piece and works right off the print bed.</p><p>&nbsp;</p><p>Redesigned ground-up following the success of <a target="_blank" href="https://makerworld.com/en/models/23734" rel="nofollow noopener">Yet Another Fidget Infinity Cube v2</a>, my latest version includes multiple shapes and fun new textures, plus hinges that are even smoother without the need for break-in!</p><h4>Variations</h4><figure class="table"><table style="border:2px solid hsl(0, 0%, 0%);"><tbody><tr><td style="border:2px solid hsl(0, 0%, 0%);text-align:center;"><figure class="image image_resized" style="width:34.88%;"><a href="https://makerworld.com/en/models/65426" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/338534/2023-11-15_832ffd9a07f34.png"></a></figure><p><a target="_blank" href="https://makerworld.com/en/models/65426" rel="nofollow noopener"><strong>Angled Pack</strong></a> includes:</p><ul><li>no texture</li><li>honeycomb</li><li>knurled</li></ul></td><td style="border:2px solid hsl(0, 0%, 0%);text-align:center;"><figure class="image image_resized" style="width:34.98%;"><a href="https://makerworld.com/en/models/65442" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/338534/2023-11-15_b386df7193c3d.png"></a></figure><p><a target="_blank" href="https://makerworld.com/en/models/65442" rel="nofollow noopener"><strong>Rounded Pack</strong></a> includes:</p><ul><li>no texture</li><li>concave</li><li>ribbed</li></ul></td><td style="border:2px solid hsl(0, 0%, 0%);text-align:center;"><figure class="image image_resized" style="width:34.88%;"><a href="https://makerworld.com/en/models/65448" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/338534/2023-11-15_43b7cd34fd3f6.png"></a></figure><p><a target="_blank" href="https://makerworld.com/en/models/65448" rel="nofollow noopener"><strong>Spherical Pack</strong></a> includes:</p><ul><li>no texture</li><li>grooved</li><li>rippled</li></ul></td></tr></tbody></table></figure><h4>Printing tips</h4><ul><li>use <strong>0.2mm layer height</strong> or lower to avoid hinges fusing</li><li>set vertical shells to <strong>2+ perimeters</strong> for strength</li><li>try <strong>100% infill</strong> for extra satisfaction!</li></ul>

Textured Fidget Infinity Cube: Angled Pack

Stop Fidgeting!

LemonArts

<p style="text-align:center;"><strong>This is my remix of Hugo's model. optimized for Bamboo and PLA. The cards fit in perfectly and are easy to slide out.</strong><br><strong>The tolerances on the model have been adjusted.</strong></p><p style="text-align:center;"> </p><p style="text-align:center;"><strong>* Space for 10 Cards</strong></p><p style="text-align:center;"><strong>* Clip for Cash</strong></p><p style="text-align:center;"> </p><p style="text-align:center;"><strong>5 card Version here:</strong></p><p style="text-align:center;"><a target="_blank" href="https://makerworld.com/de/models/112609#profileId-120603" rel="nofollow noopener"><strong>https://makerworld.com/de/models/112609#profileId-120603</strong></a></p><p style="text-align:center;"> </p><p style="text-align:center;"> </p><p style="text-align:center;"><strong>26.01.2024 Upload New Design</strong></p><figure class="image image_resized" style="width:55.82%;"><img src="https://makerworld.bblmw.com/makerworld/draft/454635/2024-01-26_0821f7eef2714.jpg"></figure><figure class="image image_resized" style="width:55.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/454635/2024-01-26_084053fd8a8ae.jpg"></figure><p style="text-align:center;"> </p><p style="text-align:center;"> </p><p style="text-align:center;"> </p><p style="text-align:center;"><br><span style="background-color:rgb(248,249,250);color:rgb(32,33,36);"><strong>the width was adjusted by +0.4mm</strong></span></p><p style="text-align:center;"> </p><p style="text-align:center;"> </p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/454635/2024-01-02_40696c6b31cfe.gif"></figure><figure class="image image_resized" style="width:42.71%;"><img src="https://makerworld.bblmw.com/makerworld/draft/454635/2024-01-02_932009f925f4a.png"></figure>

Cascade 10x card wallet (Print-in-place)

Pocket Sand!

warrell72

<p>The coaster display stand accommodates six coasters and can be positioned to showcase either the Black Spire Outpost sign or Oga's Cantina logo.</p>

Oga's Cantina Coaster Display Stand

Oga's Cantina

fb-artwork

<p>A miniature for tabletop players showing a male halfling with two short swords.</p><h4>The miniature comes in 3 variations:</h4><p>- with round base (_rb)</p><p>- with square base (_sb)</p><p>- with hexagonal base (_hb)</p><h4> </h4><p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">The printprofiles contains all 3 version on 3 printplates.</span></p><p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">The printprofile contains minimal support, that should be easy to remove.</span></p><h4> </h4><p><span style="color:rgb(0,0,0);font-size:18px;">Feel free to click the like button if you enjoy my miniatures.</span></p><p><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">Support me and become part of the club on steady: </span><a target="_blank" href="https://steadyhq.com/fb-artwork" rel="nofollow noopener"><span style="background-color:rgb(255,255,255);color:rgb(33,43,54);font-size:16px;">https://steadyhq.com/fb-artwork</span></a></p>

DnD miniature Halfling with swords

Miniatures

YelTrik Designs - Click FOLLOW

<p>Tick Remover.  Small enough to keep in your wallet, purse, first-aid kit, or diddy bag.  As a ultralight backpacker and mountaineer, I needed a tick remover that was small and light yet effective.  This is the answer!  Keep one with you whenever you venture out into the backcountry.  </p>

Tick Remover

First Aid

TripleGWorkshop

<p>Recommended order:</p><p><i>Black, Dk Brown, Lt Brown, Grey, White <strong>or</strong> Black, Dark red, Orange, Grey, White.</i></p><p>Quick Guide to changing filament~</p><ol><li>Have some paper to push away extruded filament. That's why I always set up the models on the left. </li><li>When the MK3 jogs after a change it will spit out another inch, so I follow it with paper until it starts to move back down. Doing this has given great, repeatable results.</li><li>Use a tool like this to help changes→ <a href="https://www.printables.com/model/329171-filament-change-tool" rel="nofollow">https://www.printables.com/model/329171-filament-change-tool</a></li><li>Have fun!</li></ol><p>This is a <strong>PrusaSlicer screenshot</strong>.</p><figure class="image image_resized" style="width:100%;"><img src="https://makerworld.bblmw.com/makerworld/draft/120142/2023-10-26_9poktr76i4fc.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/120142/2023-10-26_s2or5uv96sen.jpg"></figure>

The Great Wave of Coffee by Elan Harris 5 colors

Wall Decor

zach13

<h2>DOUBLE CHECK WHICH VERSION YOU NEED BY CHECKING THE VERSIONS BELOW.</h2><h2>Description:</h2><p>This is a stackable can dispenser. The purpose of this was to fit as many cans of different types as possible in my standard depth fridge which for my use case was the 12oz 7 can version. See the versions section at the bottom for what cans and what capacities are supported. Leave a comment if you'd like me to add a different can size, ideally with measurements.</p><p>&nbsp;</p><h2><strong>Printing:</strong></h2><p>I printed with Bambu PETG Basic but whatever you have should be fine. <strong>The pegs that hold it together are fairly tight, scale them down if you need to, especially if you're using a brittle filament</strong>. You may also want to use brim on the pegs if you're not using something with good bed adhesion.</p><h2>Assembly:</h2><p>The parts are assembled with 20 pegs. You will need an additional 8 pegs per level you wish to stack. Super gluing the joints during assembly is recommended, though not completely necessary depending on your imperfection tolerance. </p><p>&nbsp;</p><h2>Versions:</h2><p><strong>12oz (355ml):</strong></p><p><a target="_blank" href="https://www.crowncork.com/beverage-packaging/products/beverage-cans/12oz-355ml-standard" rel="nofollow noopener">Info</a></p><figure class="table"><table><thead><tr><th>Cans</th><th>Assembled Dimensions (WxHxL)</th><th>Notes</th></tr></thead><tbody><tr><th>8</th><td>134mm x 91mm x 545mm</td><td>278mm+ bed required, likely won't fit in most fridges. No print profile.</td></tr><tr><th>7</th><td>134mm x 91mm x 479mm</td><td>Should fit most American standard depth fridges</td></tr><tr><th>6</th><td>134mm x 91mm x 479mm</td><td> </td></tr><tr><th>5</th><td>134mm x 91mm x 347mm</td><td> </td></tr></tbody></table></figure><p>&nbsp;</p><p><strong>16oz (473ml):</strong></p><p><a target="_blank" href="https://www.crowncork.com/beverage-packaging/products/beverage-cans/16oz-473ml-standard" rel="nofollow noopener">Info</a></p><figure class="table"><table><thead><tr><th>Cans</th><th>Assembled Dimensions (WxHxL)</th><th>Notes</th></tr></thead><tbody><tr><th>7</th><td>171mm x 91mm x 479mm</td><td>Should fit most American standard depth fridges</td></tr><tr><th>6</th><td>171mm x 91mm x 413mm</td><td> </td></tr><tr><th>5</th><td>171mm x 91mm x 347mm</td><td> </td></tr></tbody></table></figure><p><strong>16.9oz (500ml):</strong></p><p><a target="_blank" href="https://www.crowncork.com/beverage-packaging/products/beverage-cans/169oz-500ml-standard" rel="nofollow noopener">Info</a></p><figure class="table"><table><thead><tr><th>Cans</th><th>Assembled Dimensions (WxHxL)</th><th>Notes</th></tr></thead><tbody><tr><th>7</th><td>181mm x 91mm x 479mm</td><td>Should fit most American standard depth fridges</td></tr><tr><th>6</th><td>181mm x 91mm x 413mm</td><td> </td></tr><tr><th>5</th><td>181mm x 91mm x 347mm</td><td> </td></tr></tbody></table></figure><p>&nbsp;</p><p><strong>7.5oz (222ml): </strong></p><p><a target="_blank" href="https://www.crowncork.com/beverage-packaging/products/beverage-cans/75oz-222ml-crownsleek" rel="nofollow noopener">Info</a></p><figure class="table"><table><thead><tr><th>Cans</th><th>Assembled Dimensions (WxHxL)</th><th>Notes</th></tr></thead><tbody><tr><th>8</th><td>118mm x 83mm x 481mm</td><td>Should fit most American standard depth fridges</td></tr><tr><th>7</th><td>118mm x 83mm x 424mm</td><td> </td></tr><tr><th>6</th><td>118mm x 83mm x 366mm</td><td> </td></tr></tbody></table></figure>

Stackable Can Dispenser

Household Items

michelem

<figure class="image"></figure><p><span style="color: #000000">I present to you my <strong>Perpetual Magnetic Calendar</strong>, perfect for adding a touch of design to your home or office.</span></p><p>&nbsp;</p><p><span style="color: #000000">The calendar consists of a wheel that houses the months of the year and the days of the week, supported by a pedestal.</span></p><p><span style="color: #000000">The transverse axis has the days of the month imprinted on it, while three markers complete the calendar to always identify the exact day!</span></p><p>&nbsp;</p><p><span style="color: #000000">The marker for the days of the month should be moved every day by sliding it to the corresponding number.</span></p><p>&nbsp;</p><p><span style="color: #000000">The other two markers are magnetic, ensuring a WOW effect for those who consult it. In particular, the magnetic marker for the days of the week may seem ordinary, but the one for the month of the year will surprise you by remaining suspended in mid-air!</span></p><p>&nbsp;</p><figure class="media"></figure><p>&nbsp;</p><p><span style="color: #000000"><strong>Printing:</strong></span></p><p>&nbsp;</p><p><span style="color: #000000">It is recommended to use preset profiles, <strong>making sure to use high resolution for the parts with texts</strong>.</span></p><p>&nbsp;</p><p><span style="color: #000000">The pieces are not huge, so you can use a resolution of <strong>0.16mm</strong> (0.12 even better) for the whole wheel and the axis where the text is located.</span></p><p><span style="color: #000000">You can also use adaptive resolution and set a high one only for the top part where the text is, it&#39;s up to you.</span></p><p>&nbsp;</p><p><span style="color: #000000"><strong>Colored text</strong></span></p><p>&nbsp;</p><p><span style="color: #000000">You need to change at least one color for the texts otherwise you won&#39;t see them. With AMS it&#39;s simple and you can use multiple colors to print the wheel texts. if you don&#39;t have an AMS, just add a pause when the texts starts and simply change the filament till the end of the print.</span></p><p>&nbsp;</p><p><span style="color: #000000"><strong>Inserting Magnets:</strong></span></p><p>&nbsp;</p><p><span style="color: #000000">For the marker of the month and the days of the week, insert the magnet <strong>during printing with a bit of glue</strong>.</span></p><p>&nbsp;</p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000109567/design/2023-12-27_bec6b379194dd.jpeg"><figcaption>Month marker with magnet inserted during the pause. I know I have to clean my plate… :-)</figcaption></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000109567/design/2023-12-27_237ec03a77104.jpeg"><figcaption>Weekdays marker with the magnet, remember to add a drop of glue and wait a minute, so it won&#39;t get attracted by the nozzle</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p><span style="color: #000000"><strong>Pay attention to the orientation of the magnets!</strong> The two markers must have the magnet&#39;s orientation <strong>opposite</strong> to the one you will insert in the holes, so they attract each other.</span></p><p>&nbsp;</p><p><span style="color: #000000">Before you insert the magnet <strong>put a bit of glue and wait</strong> so the magnet won&#39;t get attracted by the nozzle when you restart the print.</span></p><p>&nbsp;</p><p><span style="color: #000000"><i>Month Marker:</i> Printed with the sphere facing upward. At <strong>level 106</strong>, insert a pause to place the magnet. The magnet should be oriented with <strong>the TOP side opposite</strong> to the side of the magnets in the month holes.</span></p><p>&nbsp;</p><p><span style="color: #000000"><i>Days of the Week Marker:</i> Printed with the base of the half-sphere on the plate. At <strong>level 20</strong>, insert a pause to place the magnet. The magnet should be oriented with <strong>the BOTTOM side opposite</strong> to the side of the magnets in the holes for the days of the week.</span></p><p>&nbsp;</p><p><span style="color: #000000">By the way, presets profile has everything set up yet.</span></p><p>&nbsp;</p><p>For an extra smooth finish, I would recommend <strong>ironing</strong> all the top layers of the wheel.</p><p>&nbsp;</p><p><span style="color: #000000"><strong>BOM and Assembly:</strong></span></p><ul><li><span style="color: #000000">21 magnets 5mm x 2mm (diameter x thickness) eg: </span><span style="background-color: #ffffff; color: #333333">https://t.ly/i8UwR</span></li><li><span style="color: #000000">about 10 cm of sewing thread</span></li></ul><p><span style="color: #000000">Assembly is simple and intuitive, <strong>making sure to respect the orientation of the magnets!</strong></span></p><p><span style="color: #000000">The magnets must have the connecting side opposite to that of the respective marker to attract each other. Use a bit of glue for the magnets on the wheel.</span></p><p>&nbsp;</p><p><span style="color: #000000">I would suggest to have the markers ready before you glue the rest of the magnets on the wheel so you can know the correct orientation using them.</span></p><p>&nbsp;</p><p><span style="color: #000000">For the axis of the days of the month, glue may not be necessary, but it can be used to securely attach it to the wheel.</span></p><p>&nbsp;</p><p><span style="color: #000000">Finally, the most challenging task: tying the sewing thread.</span></p><p>&nbsp;</p><p><span style="color: #000000">This step can be a bit tricky as you need to determine the perfect length for all the months.</span></p><p><span style="color: #000000">Technically, this length is consistently about 82mm (from the axis hole to the wheel).</span></p><p><span style="color: #000000">Begin by tying one end of the thread to the month marker and inserting the other end into the small hole on the axis.</span></p><p><span style="color: #000000">Now, thread the other end into the hole on the back support without tying it and wrap the thread around the support twice to have it in pace but still adjustable.</span></p><p><span style="color: #000000">Verify that the length is correct by adjusting the marker into the month slots and pay careful attention to the thread length so that the magnets attract each other without touching.</span></p><p><span style="color: #000000">Once satisfied, secure the thread with a finger and apply a drop of glue to fix it in place.</span></p><p>&nbsp;</p><p><span style="color: #000000">The WOW effect is guaranteed!</span></p><p>&nbsp;</p><p><span style="color: #000000"><strong>A happy 2024 to all makers!</strong></span></p><p>&nbsp;</p><p><span style="color: #000000"><strong>UPDATE 03 Jan 2024:</strong></span></p><ul><li><span style="color: #000000">Added files and profile to use only 6x3mm magnets</span></li></ul><p>&nbsp;</p><p><span style="color: #000000"><strong>UPDATE 04 February 2024</strong></span></p><ul><li><span style="color: #000000">Added wheels in different languages (Italian, German, Spanish)</span></li></ul><p>&nbsp;</p>

Perpetual Magnetic Calendar

Date/Time Items

jpbruce

<p>This is a small Christmas tree ornament, shaped like the X1Carbon Printer (or P1S if you switch the colours) with a working door.</p><p>The model is printed in parts and then assembled:</p><ul><li>the Logo is part of the main body,</li><li>the lid is separate and uses a friction-fit,</li><li>the screen is separate and glued in,</li><li>the door is separate and uses a friction fit on the hinge.</li></ul><p>&nbsp;</p><p>Please install the door as I show in the description of my similar model here: <a target="_blank" href="https://makerworld.com/en/models/68257" rel="nofollow noopener">https://makerworld.com/en/models/68257</a></p>

X1Carbon Christmas Tree Ornament

Christmas

afschuld

<p>You'll want to print with supports in the hole for the hourglass I believe, it might be possible without, but I printed with them. I made this remix because sadly my codenames cards got waterlogged and bendy from having beer spilled on them too many times so they wouldn't fit in Kabong's original organizer. I also tightened up the tolerances to make the cover stay on when you lifted the game by the cover only.</p>

Codenames Organizer Remixed

Board/Card Game Organizers

Picture_it

<p>This one is a request from my daughter. Fun, quick print. Printed upside-down on textured pei plate.</p>

Dead Inside Keychain

Things To Print

Catharsis69

<p>A Snowflake to hang on to your Christmas Tree.</p>

KitCard - Snowflake

Kitcards

benlevi

<h2>BLV - AMS Riser for X1C V3.1 Final</h2><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 30%)"><h3><span style="color: hsl(0,0%,100%)">Introduction</span></h3></td></tr><tr><td><p>I&#39;m Ben Levi, and I want to talk to you about this BLV AMS Riser that I designed:<br>So, when the AMS is sitting on top of the printer, you can&#39;t really see what the printer is doing, and you can&#39;t even open the top glass cover to let some air in when you&#39;re printing High temp stuff. basically, something that will hold the AMS and free your Glass top cover will be a good solution for that. Now I&#39;ve seen some similar AMS risers before, but none of them really wowed me.. i think..</p><p>That&#39;s why I decided to come up with this sleek BLV AMS Riser design, easy to use, easy to put together, and reliable. I even added two handy drawers for your tools and stuff, a special shelf that can hold up to 4pcs Build Plates, built-in Dual LED strips. Sure, it took me a while, but I got it (almost..) done.</p><p>As some of you may know, I love contributing to this wonderful community, which is why I chose to share with you my project without any fee or money. Among other things, I&#39;ve also given you access to the original CAD files (F3D,STEP) so that you can easily make changes, add, and improve as you see fit. Please, if you publish a remix, make sure to link it to the original project as a remix so that others can benefit from your effort. I kindly request not to use the files for commercial purposes without explicit permission from me.</p><p>&nbsp;</p><p>Thanks,<br><strong>Ben Levi</strong></p><p><a target="_blank" href="https://www.paypal.com/paypalme/BenBLV" rel="nofollow noopener">If you want, buy me a beer </a>:)</p><p>&nbsp;</p></td></tr></tbody></table></figure><figure class="image image_resized" style="width: 58.95%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-25_370cc55ef0c1d.png"></figure><h2>Main features</h2><p>These are just a few design features I&#39;ve planned. If you have more ideas, please share them with me, and I can incorporate them into the design. Also, feel free to add remixes (CAD files are available for download).</p><ul><li>Easy installation</li><li>Dual LED strip<br>installed in optimal angle for LiDAR.</li><li>AMS riser</li><li>Top glass Holder</li><li>2 drawers for tools (with version for tools)</li><li>4 x Build Plates holder</li><li>Rubber Gasket for the glass</li><li>Customised Panels</li><li>access to original buttons</li><li>No screws required</li><li>CAD files available (F3D,STEP)</li></ul><figure class="table"><table><tbody><tr><td><p>&nbsp;</p><figure class="image image_resized" style="width: 92.39%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_18d41f48cf37f.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_a237ff37d0da5.png"></figure></td></tr></tbody></table></figure><h2> </h2><h2>How to print and where to begin?</h2><p>I must admit, if you&#39;re in search of a quick two-hour print and you&#39;re finished, this may not be the right place for it. To initiate and successfully complete this project, a considerable amount of filament and time investment is necessary. Here are the essential resources you&#39;ll be required to invest:</p><figure class="table" style="width: 70.13%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><p style="text-align: center"><strong>Printing Time</strong></p></td><td>70~85 print hours - including color switching!</td></tr><tr><td><p style="text-align: center"><strong>Printer</strong></p></td><td>X1 Carbon, P1S, P1P, X1 or Other + AMS (Optional).</td></tr><tr><td><p style="text-align: center"><strong>Filament</strong></p></td><td><ul><li>2 kg - PLA/PETG Main filament color (GREY)</li><li>0.5 kg - PLA/PETG Secondary filament color (GREEN)</li><li>14 g - PLA/PETG Black filament for text (BLACK)</li><li>34 g - TPU flexible filament for your Gasket (BLACK)</li></ul><p>* Feel free to choose your own colors.</p></td></tr><tr><td colspan="2"><figure class="image image_resized" style="width: 98.07%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_77b29f1dbec36.jpg"></figure></td></tr></tbody></table></figure><p>I tried to keep the project in as few parts as possible and minimize the use of screws and glue. I&#39;ve also included three images that show all the parts and file names to help you easily know what to print and what to remove. <strong>Click on the pictures to enlarge.</strong></p><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_5539d72c1e42.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_1698b67225759.jpg"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_34f66213cbfb2.jpg"></figure></td></tr></tbody></table></figure><p>&nbsp;</p><p>&nbsp;</p><h2>Printing settings</h2><p>Under each file name, I&#39;ve added a recommendation on how to print that component. Please note that these are just suggestions, and you can choose the filament type, infill percentage, and wall count according to your preferences.</p><p>Additionally, I&#39;ve attached an image below that illustrates how to orient each component on the print bed for optimal results <strong>(click to enlarge):</strong></p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_c8a5b6a960393.jpg"></figure><p>Please note that you will find in also wonderful print profiles from the community too :)</p><h2> </h2><h2>Assembly instructions</h2><p>I think the best way to demonstrate the assembly is through a video. Therefore, I&#39;ve created a short animation video for you that illustrates the assembly process and the sequence of the project&#39;s components. Enjoy:</p><figure class="media"></figure><h3> </h3><figure class="table"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f7b5fb7649351.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_0604a5a98bf6d.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_4edcdff3d535e.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f3764fb52c104.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_7b9abe53ec9f3.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_611a02308f5c5.png"></figure></td></tr><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_d8d2275f63acd.png"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2024-05-03_f59c54b41a2bd.png"></figure></td></tr></tbody></table></figure><h3>Buttons assembly:</h3><p>Please print x2 Button insert.stl files and assemble as the photo below:</p><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-09-29_89172a00d321c.jpg"></p><p>&nbsp;</p><h2>Recommended Remix:</h2><ul><li><a target="_blank" href="https://makerworld.com/en/models/27690#profileId-24067" rel="nofollow noopener">Front Panels for P1P remix</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28098#profileId-24385" rel="nofollow noopener">new Drawers with Clean look and version with Text</a></li><li><a target="_blank" href="https://makerworld.com/en/models/28948" rel="nofollow noopener">Spool Holder add on on the rear</a></li><li><a target="_blank" href="https://makerworld.com/en/models/29315" rel="nofollow noopener">Honeycomb panels for the sides</a></li></ul><h2>Links:</h2><ul><li><a target="_blank" href="https://s.click.aliexpress.com/e/_Dk1tOEL" rel="nofollow noopener">COB 5mm Dimmable LED strip</a> suitable to the project.<br>please make sure to choose: “white” and “Strip-USB Button” options.<br> </li></ul><h2>Colors ideas:</h2><figure class="image image_resized" style="width: 59.65%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_5f2218eae1ea7.jpg"></figure><h2>How to download CAD (f3d,Step) files:<br><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_16ad19d8f61ba.jpg"></h2><h2> </h2><h2>Selected User makes:</h2><figure class="table" style="width: 90.79%"><table class="ck-table-resized" style="border: 1px solid hsl(0, 0%, 100%)"><colgroup><col><col><col></colgroup><tbody><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_3aaa07d5a3c1e.png"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 86.34%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_f5f9b0b8d1086.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-03_ee05726581f83.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 100%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_8efeadcf004be.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 79.61%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-04_c0866329e4121.jpg"><figcaption>click to enlarge</figcaption></figure></td><td style="border: 1px solid hsl(0, 0%, 100%)"><figure class="image image_resized" style="width: 92.92%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_f106d497bd601.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image image_resized" style="width: 94.67%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_d8fbe88a9ea.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr><tr><td style="border: 1px solid hsl(0, 0%, 100%)" colspan="3"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000019535/design/2023-10-01_0d0d9ff1ec084.jpg"><figcaption>click to enlarge</figcaption></figure></td></tr></tbody></table></figure><p>&nbsp;</p><figure class="table"><table><tbody><tr><td style="background-color: hsl(0, 0%, 60%)"><h2><span style="color: hsl(0,0%,100%)">Changelog</span></h2></td></tr><tr><td><ul><li>19/9/23 - published first prototype. not meant yet to print.</li><li>19/9/23 - uploaded v1.1 with angled glass holder and fixed Size drawer, stronger rear part.</li><li>23/09/23 - Left/Right/Rear Panel edges optimization for better surface finish.</li><li>24/9/23 - Huge update v1.2 !<ul><li>Extreme optimization to main parts, now it&#39;s 6 parts but much less support and faster to print.</li><li>Added wire channel for the LED&#39;s wires.</li><li>Added lock pins to TPU gasket.</li><li>new secure method to front and rear parts in addition to the dovetails.</li><li>Optimization to all decorative panels.</li><li>2 x Button frame cover with logo for P1P and P1S.</li><li>increased glass holder degrease to prevent movements.</li><li>Deeper AMS leg&#39;s socket, securing the AMS in it&#39;s place.</li><li>Added special drawer with accessories. it has a place for the H1.0-H2.0 HEX keys, 2 x Hotends, 5 cutters, 4 x wipers, screws, glue and needle.</li></ul></li><li>25/09/23 - updated new version 1.3 with measurements fix.</li><li>29/9/23 - added 2 remixes: clean front drawer, drawers with text, Dash front parts for P1P.</li><li>29/9/23 - added Button insert.stl + button images assembly.</li><li>30/9/23 - remix section update! spool holder, honeycomb panels added.</li><li>4/10/23 - New optimized slicing profile! faster, less filament, better support!</li><li>02/03/24 - added more support to side model.</li><li>04/04/24 - changed print profile for wider base.</li><li>22/05/24 - optimized structure for vibrations.</li><li>31/05/24 - changed Internal structure to be more rigid.<br> </li></ul></td></tr></tbody></table></figure>

BLV - AMS Riser for X1C / P1P / P1S V3.1 Final

Printer Functionality Prints

Printed Items

giuliolibrando

<h2>BambuLab AMS Silica Gel Box With Hygrometer - Full Set of 5 boxes</h2><p>The project comes pre-oriented on the build plate. No supports are required when printing the pieces. </p><p>&nbsp;</p><p>The hygrometer/thermometer just clicks in place.</p><p>If you want an accurate reading <u>do not fill with silica the central one</u> with the sensor.</p><p>&nbsp;</p><p>&nbsp;</p><p><img src="https://makerworld.bblmw.com/makerworld/draft/159923/2023-10-11_6616a07828e51.jpg"></p><h3> </h3><p>-----------------------</p><p>It's available a variant of this model that use a different hygrometer sensor.</p><p>You can find it here:</p><p><a target="_blank" href="https://makerworld.com/it/models/56200" rel="nofollow noopener"><strong>BambuLab AMS Silica Gel Box With Mi/Xiaomi Hygrometer - Full Set</strong></a></p><figure class="image image_resized" style="width:77.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/159923/2023-11-03_ae8b961dcc3b5.png"></figure><p>-----------------------</p><h3> </h3><h3>Hardware:</h3><ul><li>You will need <a target="_blank" href="https://www.amazon.it/gp/product/B08B3CHGDW?&linkCode=ll1&tag=sdfggsfdgfdg-21&linkId=34f7802f3852a0561a7f0b403f5cf9c5&language=it_IT&ref_=as_li_ss_tl" rel="nofollow noopener">this hygrometer</a> </li></ul><p>&nbsp;</p><h3>The plates are divided by box type:</h3><ul><li>01 - <strong>One</strong> large central box with humidity sensor/thermometer</li><li>02 - <strong>Two</strong> large<strong> </strong>boxes </li><li>03 - <strong>Two </strong>small boxes for the sides (optional)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/159923/2023-10-11_d5c8bf5dab687.png"></figure><h3>Assembly Istruction</h3><ul><li>Insert the side panels into the central box by sliding them into the grooves </li><li>slide the cover on the panel tracks until it bottoms out</li></ul><p>&nbsp;</p><figure class="image image_resized" style="width:69.41%;"><img src="https://makerworld.bblmw.com/makerworld/draft/159923/2023-10-29_9f250eb924e4c.png"></figure><p>&nbsp;</p><h3><strong>“”"Installation"""</strong></h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/159923/2023-10-12_4133c307d93c8.png"></figure><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>---</p><p><strong>N.B. Do not remove the Object Modifiers from the plate 03</strong></p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/159923/2023-10-11_f2cb4a2b1ad76.png"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/159923/2023-10-11_75dde1a03ecf1.png"></figure><h3> </h3><p>&nbsp;</p>