tedcorindustries

JAMMED

I wanted to add headlights to my scx24 so i designed this simple headlight housing, they use the same size leds that are in the bumper (3mm).Print print orientation is face down (render pic is face up) very fast aprox 10minute print, then simply press lights in, they should be friction fit, then glue or epoxy the housing to the front of the body on the inside once you drill your holes.

SCX24 Light bucket

Crawler

Marcus Heritage

Very easy to use, just place your phone in the slot and hear the difference!&nbsp;Phones I do not recommend using with this include: Any iPhone mini and older Samsung phones as they fall in or sit diagonally in the slot which isn&#39;t ideal and doesn&#39;t provide the same effect&nbsp;

Phone Speaker Amplifier

audio

make.fix.create.repeat

ENGLISHI created this modular paint and accessory stand to organize everything I need for building and painting boxed models and my 3D prints. In the .3mf file there are 4 printbeds so you can print only what you need. The support I created is infinitely extensible and it adapts perfectly to the Tamiya / Gunze / Mr Hobby colors in a 10ml jar while the various glues can be inserted in the highest area. I created an end module for the right side and one for the left side, a repeatable central module and a 90° corner module with accessory containers that can be inserted both on the right and on the left.If you need specific parts, please feel free to contact me. ITALIANHo creato questo supporto per vernici e accessori modulare per organizzare tutto il necessario per la costruzione e la verniciatura dei modellini in scatola o per le mie stampe 3D. Nel file .3mf ci sono 4 piatti di stampa in modo che possiate stampare solo ciò che vi serve. Il supporto che ho creato è estensibile all&#39;infinito e si adatta perfettamente ai colori Tamiya / Gunze / Mr Hobby in barattolo da 10ml mentre nella zona più alta si possono inserire le varie colle. Ho creato un modulo finale a per il lato destro e una per il lato sinistro, un modulo centrale ripetibile e un modulo con angolo a 90° con contenitori per accessori che può essere inserito sia a destra che a sinistra.Se avete bisogno di parti specifiche non esitate a contattarmi.

Tamiya modular paint and accessories stand

Modelling

Halfway_Engineered

Fix your bed adhesion issues with this one simple trick!&nbsp;A humorous reminder to all users of a shared printer to wash the build plate to prevent bed adhesion issues. I use 99% isopropyl alcohol regularly, but use dish soap and a sponge with warm water if I ever have an issue.&nbsp;The 0.2mm profile creates a sign only 6cm across while keeping fine detail on the words. The 0.4mm profile is scaled up to 10.5cm to allow for printing with a standard nozzle.

Must Wash Plate Sign

Signs

RevHazlett

I've got a nice programmable power supply for my projects, however I wanted to be able to easily use it as a power source for working with my light boxes and other things. Since some of my projects are simply dimmable LEDs or fans or other constant-current PWM-controlled devices - but others are little SoC controllers (like ESP32/D1 Mini) - I wanted to also be able to send non-PWM power.&nbsp;My requirements:<ul><li>Able to isolate from the power supply with an indicator light to it's status.</li><li>Works with a wide range of voltages (namely 5-12v).</li><li>Select from straight or PWM power with a switch.</li><li>Would have a <a target="_blank" href="https://www.aliexpress.us/item/3256805486708000.html" rel="nofollow noopener">USB-A</a> and <a target="_blank" href="https://www.amazon.com/gp/product/B08SJM2G52/" rel="nofollow noopener">5.5x2.1 DC jack</a> on the front.</li><li>Would have two fixed cables out the back with USB-C and a 5.5x2.1 male jack.</li><li>Wouldn't be a nightmare to work in.</li><li>Would print strong with minimal use of supports.</li></ul>This is what I came up with.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/618066/2024-03-02_e27a6a42f8e26.jpg"></figure>When the unit has power and is off, the power switch glows red indicating it is receiving power.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/618066/2024-03-02_79dee52f405d58.jpg"></figure>Flip it on and it glows green.&nbsp;If the DPDT switch is pointing to the master switch it is straight voltage, if it's pointing to the PWM dial it is providing PWM power. This is across all outputs and there are no voltage regulators so you can put any voltage to any output. Be careful not to send the wrong voltage out! You could easily sent 12V to a 5V device if you do not double-check your power supply!&nbsp;The master <a target="_blank" href="https://www.amazon.com/gp/product/B0998W7K4H/" rel="nofollow noopener">RGB Switch</a> is wired up to have the red LED connected to NC and the green LED to NO. Ground is connected to common, and LED+ back to input V+. In fact, all positive wires are simply tied together. When the switch is “off,” the red LED is the only thing receiving power. When it is “on” the green LED and all other components receive power. The blue LED lead is not used. The <a target="_blank" href="https://www.amazon.com/gp/product/B07LBNFC1R/" rel="nofollow noopener">DPDT switch</a> was tricky. On rail 1 common is Supply ground, with side A supplying to “DC IN-” on the <a target="_blank" href="https://www.amazon.com/gp/product/B091SHPR6L/" rel="nofollow noopener">PWM controller</a> and side B shorting to rail 2's side B. Rail 2's side A is the returned “Motor V-” from the PWM controller and the rail 2's common is output V- to all jacks/cables. PWM V+ out is not used, only V+/- In and V- out.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/618066/2024-03-02_5710a62efcde88.png"></figure>The side panels just snap in place with a little effort. A 3x6mm oval accepts the input line and two 3mm holes provide an exit for 22AWG two-conductor cables (I put a 5.5x2.1 jack on one, the other was a USB-C pigtail). The side panels have retention notches that might need to be trimmed down depending on how cleanly your filament prints (this prusament required a little effort).<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/618066/2024-03-02_0639079ec27bf8.jpg"></figure>The vent holes are unnecessary, but were fun to draw 😁

Selectable Direct/PWM Control Box

Electronics

Officina23

This model is a detailed replica of the famous R2D2 droid from the Star Wars series (also known as C1-P8). It is divided into 8 parts (plus two joints) to assemble, and all parts fits on a single bed plate. The print profile is for a single color print: to add the blue, gray and red I used acrylic paint applied with a fine-tipped brush. If you prefer you can paint the parts it in Bambu Studio, but printing times will take a lot longer.

R2D2 Star Wars Droid

Star Wars

semm97

A 4x1 gridfinity box to hold the 24x24 bambulab swatches.1 box holds 50 swatches so you'll need at least 2&nbsp;

Bambulab swatches gridfinity box

Gridfinity

Stamatis Sarlis

Ghost Busters

Connor

ThisFact

<h2>NEW V2 VERSION : <a target="_blank" href="https://makerworld.com/en/models/159473#profileId-175085" rel="nofollow noopener">Rubber Band Gun V2 (Print-In-Place)</a></h2><h3>Rubber band gun thing V1:</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/560921/2023-11-12_3ba7e2ffb6259.gif"></figure>&nbsp;Something i was planning to finish for a while but had been stuck on my hard drive for too long, It's a pretty simple design with an escape mechanism that shoots rubber bands when you pull the trigger.------------------------------------------------------------<figure class="image image_resized image-style-align-right" style="width:50%;"><img src="https://makerworld.bblmw.com/makerworld/draft/560921/2023-11-13_i52netnsnm1e.png"></figure>&nbsp;Suggested print settings:<ul><li>Print with 25% to 100% hexagon infill for good strength.  </li><li>0.2mm layer height  </li><li>0.4mm nozzle for the best print quality and for no issues with the print in place mechanism</li></ul>&nbsp;Specs:<ul><li>Can hold up to 3 rubber bands.  </li><li>Pretty easy to hold in hand.  </li></ul><h3> Commercial use :</h3>Want to use it for commercial purposes? Sure, i allow it as long as you credit me as the creator.

Rubber band gun V1 (print in place)

squirrelbrain

A convenient way to display your 23ml - 3/4oz Tamiya paints.No Supports needed.

Tamiya Paint Stand

Painting

KYZ Design

Dry up to 7 spool desiccant canisters at once in a filament dryer!&nbsp;<ul><li>Print in ASA, ABS or PETG to prevent the part sagging upon heating.</li><li>You will need two pieces of the same. There are finding features that align the two pieces, and one central desiccant holder will lock them together.</li><li>The external dimensions of this is based on a Bambu reusable spool and will fit in the AMS as well as all filament dryers (that I know of).</li><li>If you are buying indicating silica gel beads, the orange beads are the non-toxic ones and the blue ones are the toxic ones.</li><li>Leave an air gap in your filament dryer to let the moist air out when drying.</li></ul>Please feel free to upload print profiles for any of my uploads - for various printers, materials, etc.&nbsp;The desiccant PACKET holder I use in the pictures is <a target="_blank" href="https://makerworld.com/en/models/72591" rel="nofollow noopener">here</a>. This has a fine thread so they clamp the Bambu spools quite tightly - making “spool shims" unnecessary when refilling your spools.  <figure class="image image_resized" style="width:78.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/724478/2023-11-29_15419d570f1c88.png"></figure>&nbsp;The desiccant loose bead holder I use is <a target="_blank" href="https://makerworld.com/en/models/23470" rel="nofollow noopener">here</a>. Note that this remix has holes on the sides of the tube (among other changes) to make drying easier when they are outside of the filament spools - this is the primary reason I made the remix - to make drying easier.<figure class="image image_resized" style="width:78.66%;"><img src="https://makerworld.bblmw.com/makerworld/draft/724478/2023-11-29_256f89d3ca1f.png"></figure>If you want a loose bead holder specifically for Bambu spools, check out <a target="_blank" href="https://makerworld.com/models/179426" rel="nofollow noopener">this one</a>:&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/724478/2024-03-18_e9981deb76fe38.jpeg"></figure>&nbsp;That is all, happy printing!

Desiccant Dryer Ferris Wheel

Desiccant

AMT_MW

<h2>What it is</h2>A compact tool to determine angles. It also includes a 120 mm linear scale and ring gauges from 1 to 9 mm in 1mm increments (clearance designed is 0.1 mm).<h2>What to print</h2>There are three parts awaiting you, which can be printed with raised or depressed digits & scales.<ol><li>upper part<ul><li>360° scale</li></ul></li><li>lower part variant 1<ul><li>1° vernier scale</li><li>collinear linear scales = 180°</li><li>one leg</li></ul></li><li>lower part variant 2<ul><li>1° vernier scale</li><li>collinear linear scales = 0°</li><li>two legs</li></ul></li></ol><h2>How to print</h2>Recommended is a 0.2 mm layer height and a 0.4 mm nozzle. Printing with a 0.6 mm nozzle and Arachne activated is possible.A multi color version is just a matter of filament swaps. → Prearranged .3mf files with two and three colors are provided, via copy & paste from them the wildest color combinations are achievable.Material at one's discretion, I used PETG in three different colors. Assembly works by simply clipping the parts together after printing. It should feel firm, move without any noticeable play and hold any angle on its own.<h3>Usage</h3>The resolution is 1°. Precision beyond that would in theory be possible with a finer vernier scale. I tried that as FFF-part but wasn't satisfied with the result. Diameter of the round part is 28mm inside (0.1mm clearance designed) and 60mm outside.The linear scales can be used to determine any length up to 120 mm, especially handy when measuring facets.<h4>What next</h4>There may be improvements and modifications based on feedback given here.<h4>Mentions</h4>The foundations for this design were laid by Pierre Vernier & Pedro Nunes a few hundred years ago.

Vernier bevel protractor - Goniometer | Rapporteur | Winkelmesser

Design

k2thestank

More adaptations coming as i design them but the Adapter will work while i add things into the threaded components<ul><li> </li><li>2-3 walls</li><li>4 Top/Bottom Layers</li><li>0.2mm layer height</li><li>10% infill</li></ul>

Spool Adapter - Canadian Filaments Cardboard

Spool Related

paaaul

After being disappointed the original model didn't fit my Deadbolts big tyres I decided to try and shrink them a little and stop them rubbing on the front wheelsI'm still a beginner at CAD & 3D printing but I think these came out alright

SCX24 Deadbolt - Rock Sliders Big Tyres Edition

RC Vehicles

Rockman

First Layer Test A1 Mini

Calibration

Wekster

<h2>Summary www.patreon.com/wekster</h2>If you like this kind of style then you should also check my Mini Hellboy, Jason Voorhees, Walter White and Peter from Deadpool 2, Batman... Please support my work by subscribing to my youtube channel <a target="_blank" href="https://youtu.be/YUoJ_KCECmg" rel="nofollow noopener">https://youtu.be/YUoJ_KCECmg</a> <a target="_blank" href="https://www.patreon.com/wekster" rel="nofollow noopener">https://www.patreon.com/wekster</a>

Mini He-Man with moving parts

These Catch-All Trays / Desk organizer containers are really versatile, I printed them in different sizes and I remixed the smaller one (50x50) by adding the slot for two Bambu Lab hotends.