Great design and great support on the design. Thank you for taking the extra effort to set up a great tool which includes sourcing parts, etc!

I just finished correcting the SKEW in my X1C and this has allowed me to calculate the correct shrinkage of my parts. One can change the material shrinkage factor in the Bambu filaments. If you print, say, a 100 mm part and it comes out 99.7, you put 99.7 in the material shrinkage factor.

Nice design! My only issue was taking the brim when printing this is ABS - it took a bit to get it off the very thin part. Everything did fit well and it seems to be doing the job. Thanks for making this available to everyone!

Worked perfectly! I printed this is ABS and the fit/finish was perfect. I only used 3 of the clips for I didn't want to put too much bend on the PTFE tubing. I did this more to keep my tubing from interfering with the auxiliary lights I put on the printer.

Very useful tool. I needed it to properly set up my filament extrusion temperature. Thank you for building this test structure!