technicallyamazing

喵喵mya

层高0.1，首层0.1， 100%填充打印 标签区域尺寸为30mm*40mm,2mm圆角&nbsp;原始文件中有F3D文件，可以使用Fusion360进行二次创造&nbsp;色卡本身需要需要使用0.1的层高，起码要保证首层是0.1层高，100%填充，收纳盒对打印配置要求不高，默认即可，盖子推荐使用透明PETG材料打印&nbsp;为了适配gridfinity，添加了一个长度更短的版本，这个版本的收纳盒附带了gridfinity的模块，底部可以预留了4x2mm的磁铁的槽位，如果不需要这个模块，也可以将它移除&nbsp;&nbsp;0.1mm layer,0.1mm first layer,100% infill&nbsp;The label area size is 30mm*40mm with 2mm rounded corners&nbsp;Click the Raw Model Files button to download the F3D file, Edit with Fusion360&nbsp;The color card itself needs to use 0.1 height, at least to ensure that the first layer is 0.1 height, 100% filled, the storage box has no high printing configuration requirements, the default can be used, the lid is recommended to use transparent PETG material printing&nbsp;To accommodate gridfinity, a shorter version has been added that includes a gridfinity module with a slot for a 4x2mm magnet in the bottom, which can be removed if the module is not needed&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/316654/2023-12-28_d7e7bab1f51b.png"></figure>

test prints