Love this model so much I printed 5! Our group played on not the most flat table and half our palyers are new to the game so these trays are appreciated by everyone for keeping track of their dice and not rolling them off the table after a few drinks!

Perfect if you need to take you dice with you to your campaign session. Make sure you have the right thickness of magnetic, had to double stack mine but turned out fine. Love that I can throw my dice box in the bag, head to work all day, then go straight to our groups sessions with all my dice in their place

Dopest things ever! Our DM is a classic D&D player and this cover made her day! Even my dad who played but in the 70s and 80s recognized the motif! 10/10 recommend printing instead of the basic. Even came out crisp with a 0.4mm nozzle!

Used a 0.4mm nozzle and turned out perfect! Wish there one an XL that held more rings for larger parties. To make it easier to grab the rings since the spacing is so tight, I placed an empty stop in between each set of rings!

Was one of my first prints and Mother’s Day gifts that everyone loved. Very beautiful.

Printed in 75% scale as a gift for my 3 year old nephew -- turned out the perfect size for his tiny mitts. He not only loved the model, but loved watching it print out with me and even watches to timelapse all the time! Fun way to get kiddos excited about learning what 3d printing is as it becomes more common in our everyday lives!

My friend saw this on tik tok and immediately asked for one for herself! As a mom with two young kiddos, she wanted a way to let them know that Mom is feeling overwhelmed and needs them to act gentle and with kindness. Has helped her so much with explaining how people sometimes need space in a fun and visual way for young kiddos to understand. So cute and helpful, all my friends and family have already asked for their own to let kids or partners know what the vibe is.

What a lifesaving model! Quickly ran out of storage under my printer for filament and needed a solution that allowed for wall storage but had a hard time finding any for holding cereal boxes. Looked at a handful models that had worked and looked fancy but used too much time and filament to make as many as I needed. Stumbled upon this model and woah is it perfect! Nothing fancy, super functional, and uses minimal filament. Printed 18 already and plan on printing many more! If your looking for wall storage that works with 4L cereal boxes, LOOK NO FURTHER!

Super cute, fun, and simple toy - perfect size for coffee table or camping game! Modified the base to have a closed bottom as I plan to use this on camping trips and didn't want to have to find a flat surface to play on.

Sleek and easy to print model that worked perfect for my reading glasses! The mesh liner in the lid is definitely my favorite part of the model as you don't have to print a TPU liner to get great flexibility. My magnets were half the height as the recommend ones, so I just doubled them up to make sure everything fit together perfect. Printed a second one for my sunglasses without thinking and sadly they were too tall to fit inside. Would love to see a model with a bit more height to fit sunglasses too!

in love with this model as I learn more and more about the importance of quality filament storage! printed with 0.6 nozzle to save on time as I’m planning to make around 30 of these bad boys! choose to pass on the silica gel holder in the lid and went with 2 holders in the base, has been holding a consistent 10% for more than a week! would recommend printing all the silica gel holders in PETG so you can dry the beads without removing them from their holders

first big project and learned a lot throughout the process! printed with 0.6 nozzle in PETG and came out as perfect as could be under the conditions I had. Would highly recommend drying your filament throughly if you are using PETG to avoid any stringing or globs getting stuck in between layers. basically print is great but do your research if you are new to using PETG

printed with a 0.6 nozzle to save time and fit perfectly without any changes! easy to sand and finagle a fit if your box is a slightly different dimension

cute quality of life upgrade, printed with a 0.6 nozzle turned a perfect, just need some extra elbow grease and mild sanding to get the pieces to snap together. would recommend using a 0.4 nozzle if the want to avoid this

has saved my prints and filament! highly recommend printing these out ASAP if you have an AMS. I noticed an immediate quality increase in prints - less stringing, less globs getting stuck in between layers, more quality prints! If you have an AMS Pro, I recommend printing in PETG or ABS in order to use the drying function without concern. Makes it so convenient as you can dry the silica gel at the same time as your filament!

used a 0.6 nozzle and printed well but ended up having to sand off the pegs to fit it properly to the drawer. a dab of super glue holds them well and haven’t any strength issues! Defintely should have used the recommended 0.4 nozzle to make sure those pegs print to fit to avoid finagling

Was perfect for a "First Print" for someone who had just received and set up the P1S printer and had no extra bits and bobs, like magnets or extra screws. An easy solution to a problem that needed to be solved ASAP -- honestly Bambu should include this on the SD card to make it extra easily while you get everything set up. Only wished there was a solid wall version as tiny bits slipped through the 'meshed' sides.