Search models, users, collections, and posts
Bio
First print 11/3/25
Casual hobbyist, but I am enjoying learning so much!
Achievements
MakerWorld Guardian
This badge has expired
Fits perfectly for my dessicant jug. No issues with the print. Thanks!
Share
0
0
0
I bought an initiative tracker that uses cards to represent players and monsters/npcs. The included clips didn't function as well as I would have liked since they were designed to hold a single card and were very thick and bulky. So I made this. It is a single rail that fits on the top of your screen that holds cards (of any standard thickness). The cards can easily be repositioned or reordered as necessary. This is my first original design so I'm excited to share it with you all.
DM Screen Card Rail
12
56
Share
0
0
0
Absolutely gorgeous. Printed flawlessly. Took a bit to figure out what needed to be removed (supports, flashing, etc.) but wasn't too difficult. It has a wonderful texture and feels very sturdy
Share
0
0
0
Simple print. The pause to allow you to insert the tools is a great addition. If I could offer one point of feedback it would be to suggest moving the pieces a bit further apart on the print plate (I have pudgy fingers and a little extra room to work would be nice) but even without that, flawless execution of the print. Thanks for this!
Share
0
0
0
Nice, easy print. Fit the lids very well. Only thing I'd say to anyone else printing these is that I, at least, didn't realize these were hinged, and I had to 'crack' the hinges loose. The hinge is nice and tight, meaning that once you insert the movable piece into the groove under the rim of the container, then fold the clips up and snap them into place, if you remove them at any point, you have to manually open the hinge again. But for the added security they add to the lid, it is well worth such a very minor inconvenience. Thanks for this great design!
Share
0
0
0
These fit perfectly, even after adding some window seal on the inside of the lid edge. I printed 10 instead of 8 so I could have one in the middle of the long sides, as well, to help ensure a nice seal. Printed flawlessly and didn't take too long. Thanks for this!
Share
0
0
0
This was slightly too short on the y axis for my remote, but that is easily fixed with some scaling. My only suggestion would be to incorporate a keyhole in the back to hang the remote from, or some screw holes to attach it to a surface.
Share
0
0
0
Simple print that fits nicely on multiple jugs. The model is sized large enough to hold the caps and small enough that they aren't in the way hanging over the edge of my shelf.
Share
0
0
0
Quick, simple print that fits well
Share
0
0
0
Quick, simple print that fits well
Share
0
0
0
No hassle print that looks great!
Share
0
0
0
Simple, easy print.
Share
0
0
0
One of the latches is a bit tight, but that is talked about in the description. The only other thing I would offer is that the allen key holder for the large tool is loose and the tool falls out when I close the lid. But I put some tape on the holder and pushed the tool in, and that seems to have fixed it. Overall, an amazing model! Looks great and is both functional and helpful.
Share
0
0
0
No more data