takitus_

organize

helldivers

Reefer

I find that the poop catchers are all fantastic, but somehow too static. I thought about how to change that and this is the result. You can put the exhaust on both sides of the Bambu lab printer. Or wherever you feel like. You can choose the ejection direction yourself. Whether to the left, right, or rear, does not matter. Only upwards makes no sense, unless you connect a vacuum cleaner :-) It works amazingly well (at least for me) and takes little space. You can customize the length and you can also put it on or in a box. The external filament roll also still has enough space. I printed it with PETG because it's only 2 layers wide and I wanted flexibility so it wouldn't break when you put it together. It is important to position the opening of the catcher and holder well at the exit of the printer. I used double-sided tape, but the best tape is special mirror tape (I don't know the correct name for this tape, but it is used to stick mirrors to the wall).You will need a raft or brim when printing the segment and the catcher. Print it like on the 3d picture. The idea is not yet finished, so I make it available to the community with step files to play. Maybe there will be more ideas. Especially the holder seems to me to have potential for improvement. I wish all who deal with it a lot of fun and I'm happy about every make.

Poop Chute Pipe

poop chutes

TS.Makers

Top your christmas tree with style with this Super Mario Xmas tree topper. The model comes with a slot to slot in a Xmas tree LED to light it up though may not be effective depending on your choice of filament. Please read the following considerations when printing with my profile. &nbsp;The tree topper coil prints like a solid blob with my pre loaded support settings. The coil is actually flexible and supports can be released by gently bending the coil and pulling off the support with pliers. Glue is highly recommended when printing the star. The eyes are pressure fit and do not require glue as long as your printer is well calibrated. Needle nose pliers are the only tool needed for this model. Assemble by threading the coil into the bottom of the star. &nbsp;I dont own an Xmas tree but I tested the coil on an Elf tree. If the coil is too short add a little bit of heat via blow dryer or hot watter while attacked to the star and streach out the coil. If you find this is insufficient feel free to PM me a length of coil you need and I'll see what I can do.

Super Mario Power Star Christmas Tree Topper

christmas

nkamenar.it

I modified the gasket to have wings that make it so the LEDs can shine into the printer, but they are blocked from direct view when you are looking into the printer. Makes it much more pleasant so the bright LED strips don't blind you every time you check on a print.

Revised Gasket to hide LEDs (so they don't blind you)

riser

MadMax3D

Check out my new and <a target="_blank" href="https://makerworld.com/en/models/105448#profileId-112537" rel="nofollow noopener">improved version</a> that also works with the A1 printer<figure class="image image_resized" style="width:9.01%;"><a href="https://makerworld.com/en/models/105448#profileId-112537" target="_blank" rel="nofollow noopener"><img src="https://lh3.googleusercontent.com/pw/ABLVV84lQ342EQyh0hZqx_iXGvAcjWcv7131s3yTuuwsw_Faa0WUlUW8RcZeHFm1LzoDIXkenJSzbeqA8HE8VwbGDU-9y6PrzgkDnnkOYXebyrxuh9qU5eXCGefzWEo1hbkuGKFQB6KmEMEuCk7o6xkkXHhUwdpJMS8gvowvODr53G8jxHVRfzp-UpLk6jpAOGx6wH7lVv0PGUhVDtp2IK6dcwx2g5AJYRFpFQtJUcB-ptKHCqNNhaUIUb-2s5Yj0VLF2NO51ExwVfzAC4VMjhBLAHwUHb1b1IP3OkWpsgWyoMcN0LXtXr876YLKzG2qvdfuG06fppFPZICjCmVWlF1yNGrhMK4eXb1mmIOyMKtbFGoJS9sxEUpkVSFkqF06lJGjSaRAANzVOl4WwnKt3vb0DiTvDbdH_En-PRPDCHyEGZe4rtrPFe_gDec5QU0l2-ur_EbYx83tMAlpdVMVdVJtYUJPxzd8QDTsc_L3ujbl6rcrtZsyO30BLajq4hp_U-m7zvrNYWCsGuBI5rUTHpiyR-iPJqjaJfyEhczQ-X3bHureGvtNl97O5ljGvaERjDpsmEbdpIEvf5v2dy5jurZ7zzLe4rzi2bBtq2ewpGR0mV8bceLp1r9HIjgQKIAPmdjic1zAhfkFmTHb3403eqO_fMOfzCU3bYgwp4OqGlz2gom1Bji11DITYsj_ai7090X0iSIjxkO-r6k0q6eFn_tod61i8qLBhAC4bUtQmTZpLu8V8pD4ucfVj4X5F3RX84rbop4FwsFEXx0QD_aQ9PNewjZgB3LPDIAeER9wJ8rE6MSwj0x8YSLec2zRXIVXNlUfqAaiLoXlrXe71gzGzdBsWeOcglVxWsZLAx0SSZaTli672YEU7mzswv5K2JLX3hLbG6SuR4GT-N8DBhskuT7G0C_gHQ3iawNawrRZkrjMQOWAM-6Ae2zG8AaNW5MhNVMKddko5-yWNTfcfhPu24svhpz_NUwiaaiOG0PHVjlwMEpP9Dg=w1276-h957-s-no-gm?authuser=0"></a></figure>Check out my lead screw cleaner for the <a target="_blank" href="https://makerworld.com/en/models/77336#profileId-81722" rel="nofollow noopener">A1 Mini</a>&nbsp;I was looking for a simple, hands-free way to clean the black soot off the lead screws on my X1C, MK3S and Prusa Mini. To use this cleaner, simply stuff some tissue, paper towel or sponge material in the cavity, douse it in IPA and clip it to the lead screw. Move the z-axis up and down. Be careful not to crush the cleaner between the top or bottom.I've included the Fusion file which has a “snugness” parameter called SNUG. This parameter adjusts the tightness of the fit and is set to .2mm in the .stl. It adjusts the distance between the inner faces of the clip portion. If the clip is too tight, reduce the snugness parameter to .1 or to 0.<a target="_blank" href="https://photos.app.goo.gl/rwRcAqLDimVnrqh19" rel="nofollow noopener">Video Bambu Front Screw</a><a target="_blank" href="https://photos.app.goo.gl/USkbGSJ66UxdCw7VA" rel="nofollow noopener">Video Bambu Rear Screw</a><a target="_blank" href="https://photos.app.goo.gl/EP9oCR47BrkFgzwYA" rel="nofollow noopener">Video MK3S Dual Cleaning</a>I printed it in PLA, .2mm layer height, no supports and no brim.&nbsp;Update 1 Per request for those without Fusion 360, I've added three new .stls with preconfigured snugness settings. Snugness refers to the distance between the inner faces so that it clips snugly onto the screw 8mm. Snug 0 = 8mm, Snug .2 = 7.8mm and Snug .4 = 7.6mm.&nbsp;Update 2 I have provided a configurator in OnShape to be able to create a model with your custom snugness setting between 7.4 and 8 mm. OnShape is a CAD program, much like Fusion 360, but you don't need to have a copy, or even an OnShape account. The design will open in a browser window where you can enter the desired value and generate your own model with custom snugness dimension. See “OnShape Lead Screw Customization.pdf” in the documentation section.

Lead Screw Cleaner For 8x2 z-Axis Screws

tools

dp makes

A pan flute, also known as panpipes or syrinx, is a musical instrument that works on the principle of the closed tube. It consists of multiple pipes that gradually increase in length (and sometimes girth) from one end to the other. Pan flutes have been popular as folk instruments for centuries, with various varieties found in cultures around the world.&nbsp;I think my idea of creating a "Whistle Pan flute" by connecting whistles of different lengths in a line is an interesting and creative one. While it may not be a completely unique idea, it certainly has the potential to produce a unique and fun sound. By carefully selecting and aligning the whistles, it may be possible to achieve a greater range of notes than a traditional pan flute. It would be exciting to see how different materials and shapes of whistles could be used to create even more variations in sound.&nbsp;This model is in progress and I will continue to tune until I have a model that gives a great Whistling Flute sound.&nbsp;•Print settings•&nbsp;Supports: No Resolution: 0.2mm Infill: 15%&nbsp;<h4>Important notice:</h4>This design is free for the benefit of the community, but If you like my designs and want to contribute, you can make a donation to <a target="_blank" href="https://www.paypal.com/paypalme/DPalacionis" rel="nofollow noopener">paypal, </a>that will be greatly appreciated.

Whistle Pan flute

wuguigui

<h2>Summary</h2>There is a specialized LED Kit for this mushroom lamp on Amazon now:<a target="_blank" href="https://www.amazon.com/dp/B0D75SLLY9?maas=maas_adg_FD4EEC810D7A3AE13B04CDE09F6026DD_afap_abs&amp;ref_=aa_maas&amp;tag=maas" rel="nofollow noopener">Mushroom Lamp Components Kit for 3D Printing</a>&nbsp;Updated 12/03/2023 A new cute pocket-size rechargeable mushroom lamp at: <a target="_blank" href="https://makerworld.com/en/models/12926" rel="nofollow noopener">https://makerworld.com/en/models/12926</a>I made a mushroom night lamp based on the small mushroom I made before: <a href="/thing:4978281" rel="nofollow">https://www.thingiverse.com/thing:4978281</a>It&#39;s easy to assemble, without screws(maybe need a little glue to stick the 9 caps on the head). I recommend LED light（less than 3.5W) with E27 holder for this lamp.If you were in China, you can buy the LED light and holder at: <a target="_blank" href="https://item.taobao.com/item.htm?spm=a1z09.2.0.0.40e02e8dHcE0ZZ&amp;id=654792151126&amp;_u=m25oc3248e8" rel="nofollow noopener">https://item.taobao.com/item.htm?spm=a1z09.2.0.0.40e02e8dHcE0ZZ&amp;id=654792151126&amp;_u=m25oc3248e8</a>Thank you for loving it! :)I also update a new version at( see the image below): <a target="_blank" href="https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-191671" rel="nofollow noopener">https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-191671</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-d431b608-d577-47f1-82e6-16aaae054c9a" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-d431b608-d577-47f1-82e6-16aaae054c9a</a>it has a new structure and is more compact with less filament.other 2 cute mushroom lamps:Mushroom Lamp B: <a target="_blank" href="https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-b-193906" rel="nofollow noopener">https://www.myminifactory.com/cn/object/3d-print-mushroom-lamp-b-193906</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-b" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-b</a>Mushroom Lamp C(suit small space 3d printers): <a target="_blank" href="https://www.myminifactory.com/object/3d-print-mushroom-lamp-c-196725" rel="nofollow noopener">https://www.myminifactory.com/object/3d-print-mushroom-lamp-c-196725</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-c" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/mushroom-lamp-c</a>A funny Banana Lamp(free): <a href="/thing:5216983" rel="nofollow">https://www.thingiverse.com/thing:5216983</a>Banana Lamp 2.0: <a target="_blank" href="https://www.myminifactory.com/object/3d-print-banana-lamp-2-0-206292" rel="nofollow noopener">https://www.myminifactory.com/object/3d-print-banana-lamp-2-0-206292</a> or <a target="_blank" href="https://www.cgtrader.com/3d-print-models/house/lighting/banana-lamp-updated" rel="nofollow noopener">https://www.cgtrader.com/3d-print-models/house/lighting/banana-lamp-updated</a>My other designs: <a target="_blank" href="https://makerworld.com/en/u/2112721175" rel="nofollow noopener">https://makerworld.com/en/u/2112721175</a><h2>Print Settings</h2>Printer:snapmaker 2.0 A250 &amp; anycubic i3&nbsp;Rafts: No&nbsp;Supports:Yes&nbsp;Resolution: 0.2&nbsp;Infill:30-40%Filament: <a target="_blank" href="http://www.amazon.com/s?url=search-alias&amp;field-keywords=any+PLA%2B" rel="nofollow noopener">any PLA+ </a>any<h2>Post-Printing</h2><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/212286bf-cf1d-4206-8ba1-40d3b8e90a15.jpg" alt="image">&nbsp;Mushroom Lamp Family&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/591e3f47-1d16-47f4-bbe4-0936b7d2f1b5.jpg">&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/94bf8ef4-12d7-4148-aceb-69a083d8ad55.jpg">&nbsp;Printing with support&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/cf919e6f-b83c-4927-9acf-26c8caa0f570.jpg">&nbsp;Printing without support&nbsp;<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000012902/design/89291392-bace-4a3b-b8e3-9fbd0593f90b.jpg">&nbsp;Printing without support