tajo27

NoycePrints

Here is a collection of handy attachments for the Dum-E desk helper. All are simple to connect to the wrist, requiring only a single M3x10mm countersunk screw to secure. I aim to publish more adapters and attachments as time goes on. Let me know if there's anything in particular you would like to see made available. &nbsp;Included are the followingPhone standBusiness card holderElastic band powered gripperLogitech c920 Webcam clampLamp attachment&nbsp;Required for assembly&nbsp;Phone standPrint stand parts 1x Backing and Bottom. Recommend 20-30% infill for both. No supports. Screws required: 2 M3x10mm countersunk screws. &nbsp;Business card holderPrint card holder parts 1x left arm, right arm, backing and base. Recommend 20-30% infill for each. No supports.Screws required:2x M2.5x8mm countersunk screws.2x M3x10mm countersunk screws.&nbsp;Webcam mount for Logitech C920Print webcam mount parts A and B. Recommend 20-30% infill for both. No supports.Screws required:2x M3x10mm countersunk screws. Gripper attachmentParts to print:Gripper left x 1Gripper right x 1Gripper frame x 1Gripper connecting arm x 8Recommend 30% infill, no supports.Screws required:16x M3x8mm countersunk screws.1x small elastic band (if you want it to function) This slots into groves on the sides of the arms. Desk Lamp AttachmentParts to print:1xLamp attachment1xBambulab LED lamp Kit 001Optional 2x M3x5mm screwsPrint at 15-20% infill&nbsp;Coming soon: <ul><li>Stationary holder.</li><li>Helping hands for electronics soldering.</li></ul>&nbsp;&nbsp;

Dum-E optional attachments.

gripper

9arr3tt

Modified to fit Ikea Skadis pegboards, also added AA and AAA labels

AA and AAA battery dispenser for Ikea Skadis

other

Catherine Doucet

<h2>Scaled down recreation of the Bambu Lab X1C and P1S printers as pen cups</h2><h4>Features :</h4><ul><li>No AMS needed, just a bit of glue to assemble the parts together</li><li>Approx 20% the size of an actual printer</li><li>Comes in 4 variations, X1C for desk, X1C for SKADIS board, P1S for desk & P1S for SKADIS board</li></ul>&nbsp;Printing tips :<ul><li>Use the provided print profiles for the variation you want</li><li>Everything except the SKADIS universal mount are the basic 0,20mm profil. Make the mounts with 4 walls</li></ul>&nbsp;*See my other SKADIS board accessories in this <a target="_blank" href="https://makerworld.com/en/u/1637693929/collections/435081" rel="nofollow noopener">collection.</a>

Bambu X1C & P1S freestanding & Skadis bins

DarkArtsLab

This attaches to the rear of the printer using the 3 “mystery holes” around the exhaust vent. I used some small sheet metal screws I had laying around.&nbsp;I designed this because I was unable to find one that met my needs. I needed a 90° bend to the right side of the printer (as viewed from the front) and a 4" hose connection. I found some with reduction to smaller hose connections, but I think that's a bad idea. The fan in the printer in not particularly strong. Reducing the vent size would add some backpressure and reduce the air flow more than is desirable. This one allows the use of a full 4" dryer vent hose. &nbsp;At the other end of the hose, I just built a plywood panel with a standard dryer vent port in it. When I print ABS or ASA, I can just open my window, insert the panel, and slide the end of the hose onto the dryer vent port. But it makes it easy to remove and keep the window closed at other times. Of course, a permanent installation is another option.&nbsp;*** Edit ***By request, I added a sedond print profile for a vent that exits to the left (as viewed from the front). To allow access to all 3 screws, I had to make it stick out a bit farther from the rear, and offset the exit pipe a bit upward. You may still need a 90° screwdriver to tighten the screw behind the exit pipe.&nbsp;