tactoyo

R C 3D

PRINT PROFILES: The following are the only print profiles tested and approved by me. They are listed by the name I provided in the print profile description. I cannot guarantee the quality of any print profile that hasn’t been uploaded by me.&nbsp;<ul><li>Pokeball Upper</li><li>Pokeball Lower</li><li>Pokeball Top Shell</li><li>Pokeball Bottom Shell</li><li>Pokeball Button</li><li>Pokeball v2</li><li>Pokeball Stand</li><li>Great ball</li><li>Ultra ball</li><li>Master ball</li></ul>&nbsp;SUMMARY: This is a simple pokeball that I designed to print without any additional hardware, and minimal supports. The intent was to make the pokeball as easy to print and assemble as possible, while remaining tough and functional. If you find any issues, leave me some feedback please.&nbsp;Printing/Assembly:If you decide not to use the print profiles, these are the settings I used.&nbsp;<ul><li>Global Settings:<ul><li>6 Wall Loops</li><li>Gyroid Infill</li></ul></li><li>Red and White Pokeball Shell:<ul><li>Enable Supports: Normal (Auto)<ul><li>Snug</li><li>On Build Plate Only</li></ul></li></ul></li></ul>Assembly:The assembly is done by first gluing the top shell and bottom shell to the pokeball internals. There’s a small square tab to help align the pieces. Once the glue is dry, slide a small piece of filament through the hinge while holding the two halves together. Cut the ends flush to the pokeball. I add a drop of glue to the outside pieces of the filament since the center hinge piece is the only one that needs to rotate in order to operate. Finally, glue the button onto the pokeball. There’s a post designed to help align the pieces.&nbsp;The filament piece used for the hinge will be tight, so you might have to take an allen key and hollow out the hole a bit to get it to slide into place.&nbsp;That's all there is to it. Follow my facebook page, RC3D, for giveaways and entry details as well as my latest models.&nbsp;CHANGELOG:&nbsp;UPDATE 12/3/2023:Added great ball, ultra ball, and master ball tops. I only added the top because everything else is the same, so I'll include 3 separate print profiles for these.&nbsp;UPDATE 11/26/2023:Added a guide post for the button, revised the connection to fit better, thickened the shells to prevent the banding, added alignment squares to align the shell and internals, added a stand.&nbsp;INITIAL RELEASE (10/19/2023)I created this model because the other Pokeball models I found either used external parts or didn't operate how I wanted. This one is designed to open and close using the button on the front. The button isn't 100% required to open the ball, but the intent was to make it functional so it just makes the ball pop open freely. The inside has a flat spot to aid in aligning the outer shell and make printing easier.&nbsp;

Fully Printable Pokeball Set

pokemon

TripleGWorkshop

Wiki Link: <a href="https://en.wikipedia.org/wiki/120%C3%97570mm_NATO#Armour-Piercing_Fin-Stabilized_Discarding_Sabot_(APFSDS)" rel="nofollow">https://en.wikipedia.org/wiki/120%C3%97570mm_NATO#Armour-Piercing_Fin-Stabilized_Discarding_Sabot_(APFSDS)</a>Add a filament change about there for the 2-color look.<figure class="image image_resized" style="width:85.29%;"><img src="https://makerworld.bblmw.com/makerworld/draft/119929/2023-10-25_78mn2shhskcq.jpg"></figure>

120×570mm NATO Sabot Round (APFSDS)

tank bullets

Big Plate Chicken

<figure class="media"><div data-oembed-url="https://youtube.com/shorts/EF0wKgbhywc?si=mggXdYYncWT3ia03"><div class="ck-media__wrapper" data-oembed-url="https://www.youtube.com/watch?v=EF0wKgbhywc"> <div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"> <iframe src="https://www.youtube.com/embed/EF0wKgbhywc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="encrypted-media" allowfullscreen=""></iframe> </div> </div></div></figure>Can you imagine? We made 7 adjustments and optimizations for this model, spending nearly a week on the optimization! Now, it's finally without major issues! This 3D printed model design, we named it the Radish Cannon! It can not only launch projectiles, but it also doesn't require supports and is a one-piece print. If you have the AMS multi-color system, that's even better, as it can be printed in multiple colors in one go, making it look more attractive! Welcome to download and print~ It requires a 0% infill rate, with the wall thickness set to 0.8mm! If you like this design, please click the 'like' heart button to show your appreciation and support!,please follow us on Twitter: <a target="_blank" href="https://twitter.com/BPCSbpcs" rel="nofollow noopener">https://twitter.com/BPCSbpcs</a> Feel free to contact us if you have any questions.

Radish Cannon (Print-in-Place)

radish cannon

Saber3D

*Light Fury not included*&nbsp;Check all my models out at <a target="_blank" href="https://saber-3d.com/" rel="nofollow noopener">www.Saber-3D.com</a> &nbsp;Follow our socials to see new models! &nbsp;<a target="_blank" href="https://www.instagram.com/saber.3d" rel="nofollow noopener">https://www.instagram.com/saber.3d</a><a target="_blank" href="https://www.tiktok.com/@saber3d" rel="nofollow noopener">https://www.tiktok.com/@saber3d</a> &nbsp;Flexi Toothless can Stand, Sit, and Flap Its Wings!&nbsp;It is a great print for those who love to fidget. It does not require supports and prints well in PLA.&nbsp;No Supports necessary!&nbsp;Not all filaments are created equal, If your having issues with wing joints, I suggest increasing or decreasing wing size by 1% until you have the desired fit.&nbsp;For personal non-commercial use only. Please do NOT redistribute the files to anyone else.&nbsp;Want to sell prints or just enjoy the instant access to all my models? join our All Access tier on <a target="_blank" href="https://www.patreon.com/Saber3D" rel="nofollow noopener">Patreon</a>. &nbsp;We really appreciate your support!&nbsp;Please share images of your prints, we love to see them!

Flexi Toothless Dragon (3MF Multi-color)

dragon

Willi 3D

Create a pit droid …. or more! (They work better in groups.)&nbsp;If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. <a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=WGL5LXN5EHEXN" rel="nofollow noopener">If you want to support my work bye me a coffee.</a> Thanks!&nbsp;Description:This is a KIT CARD of a pit droid. Scale 1:10&nbsp;Update:(24/08/23) <ul><li>optimized printability of the pelvis</li></ul>(18/08/23) <ul><li>optimized upper leg to pelvis fit</li></ul>Printing:Layer height: 0.1Supports: NoBrim: NoMaterial: PETG, (ABS), (PLA)&nbsp;Assembly: The connections are designed and optimized for PETG, the use of PLA or ABS makes assembly more difficult and the parts can break. Follow the instructions in the picture.

Kit Card Pit Droid Star Wars

droids

martin.taichl

This is a 3D printed model of a generic Corvette Class Light Frigate of the MCRN from the tv show the Expanse. This particular ship is named the Phobos. The ship has several features:&nbsp;- Retractable PDCs- Openable Torpedo tubes with torpedos- Retractable Airlock cover- Extendable Docking Bridge- Openable Drone bay with a Drone&nbsp;The model is a kit and requires no glue. The ship is in scale with my <a target="_blank" href="https://www.printables.com/model/289226-morrigan-class-from-the-expanse" rel="nofollow noopener">Morrigan Class Patrol Destroyer</a> and my <a target="_blank" href="https://www.printables.com/model/136343-rocinante-from-expanse" rel="nofollow noopener">Rocinante</a> model. For the assembly I highly recommend to watch the dedicated video about the project. <figure class="media"><div data-oembed-url="https://youtu.be/YdLMHBhK1UM"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/YdLMHBhK1UM" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>