szymusiek22

星骸造物-StarK

可动手3.0-Dexterous hands 3.0

mecha

KENPRINT

<p>Hueforge butterfly printed using 0.2mm nozzle</p><p>&nbsp;</p><p>0.4mm print profile available also</p>

Hueforge Butterfly

hueforge

TripleGWorkshop

<p>I printed these at about 900g of Petg each. Not the cheapest but indestructible.<br><br>Maybe you can get away with scaling down or reducing infill to help.</p><p>&nbsp;</p><p>Survived very well outdoors with daily use.</p>

Vehicle Ramp for gutter/curb

h3li0

<h2>drawer module · reDesk</h2><h3>with grid drawers and optional colour accents</h3><p>modern minimalist drawer module design with grid pattern and optional colour accents</p><p>&nbsp;</p><p><strong>dimensions in mm &gt; x:</strong>200 · <strong>y:</strong>200 · <strong>z:</strong>120</p><p>&nbsp;</p><p><span style="background-color: rgb(255,255,255); color: rgb(0,14,26); font-size: 14px">this design is the <strong>first</strong> of a series of 3 · the </span><strong>reDesk series</strong><span style="background-color: rgb(255,255,255); color: rgb(0,14,26); font-size: 14px">, that were kindly supported by </span><a target="_blank" href="https://formfutura.com/" rel="nofollow noopener"><strong>FormFutura</strong></a><span style="background-color: rgb(255,255,255); color: rgb(0,14,26); font-size: 14px">, that provided the filament shown on the pictures: </span><a target="_blank" href="https://formfutura.com/product/refill-pla/?aff=13" rel="nofollow noopener">reFill PLA army green</a><span style="background-color: rgb(255,255,255); color: rgb(0,14,26); font-size: 14px"> and </span><a target="_blank" href="https://formfutura.com/product/refill-pla/?aff=13" rel="nofollow noopener">reFill PLA signal black</a><span style="background-color: rgb(255,255,255); color: rgb(0,14,26); font-size: 14px">. If you are interested in this filament, you can use the code </span><strong>H3li0-15</strong><span style="background-color: rgb(255,255,255); color: rgb(0,14,26); font-size: 14px"> and you&#39;ll get 15% discount on your next order (excl shipping)</span></p><ul><li>0.20mm layer height</li><li>10% cubic infill</li></ul><h3>notes</h3><ul><li>includes bambu studio 3mf file and STLs</li><li>the <strong>tolerances</strong> for the color accents are very tight, please ensure that your filament is properly dry and your printer calibrated.</li><li>it&#39;s very important to ensure the bed is <strong>thoroughly clean</strong> so that there are no adhesion issues, as it has both large flat parts, and the small drawer accents, which require proper adhesion</li><li>all photos uploaded are of the <strong>actual printed model</strong>, taken inside a light-box or in home studio</li><li>if you enjoy this model please consider to<strong> </strong><a target="_blank" href="https://www.buymeacoffee.com/h3li0" rel="nofollow noopener"><strong>buy me a coffee</strong></a></li></ul><h3><strong>commercial licence </strong>membership available on my <a target="_blank" href="https://patreon.com/h3li0" rel="nofollow noopener"><strong>patreon</strong></a></h3><h3>reDesk series:</h3><ul><li><a target="_blank" href="https://makerworld.com/en/models/482396#profileId-394374" rel="nofollow noopener">drawer module · reDesk</a></li><li><a target="_blank" href="https://makerworld.com/en/models/493394#profileId-407131" rel="nofollow noopener">organiser · reDesk</a></li><li><a target="_blank" href="https://makerworld.com/en/models/493422#profileId-407157" rel="nofollow noopener">headphone stand · reDesk</a></li></ul><p><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000482396/design/2024-06-12_f3b626886cb94.png"></p>

drawer module · reDesk

pojemnik

mikolaj.mazik

<p>A model of a harmonic gear with a ratio of 50 to 1, built with the future harmonic astrophotography mount in mind. Most of the parts were made of ASA, the flexline was made of TPU. The entire structure is fastened with M2 screws which are held in place with threaded inserts.</p><p>Bearings:</p><ul><li>2x 61807 2RS ( 6807 2RS) 2RS 35x47x7mm bearing</li><li>2x 625RS 5x16x5mm bearing</li></ul>

Harmonic/ Strain wave drive with no backlash for Nema 17 Stepper Motor 

Inne

laisch

<p>With this handy little tool you can clean your carbon rods even when the lid of your bambulab printer is closed.</p><p>Just put Isopropyl alcohol on the sponges, snap it to your carbon rod and move it back and forth a few times till they are shiny again.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/251911/2023-12-07_e4ey6ohuzxon.gif"></figure><p>&nbsp;</p><h3>Postprocessing</h3><p>For the sponges you can use a normal kitchen sponge (be careful to not use the abrasive ones). Cut two pieces roughly about 10x20x20mm and press them into the spongeholder.</p><p>For the pullback mechanism you can either print the provided spring in TPU, or use small hair rubberbands. The spring also works in PETG but looses its strength from time to time.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/251911/2023-12-07_g1k0c2tnzlwn.jpg"></figure><p>&nbsp;</p><p>&nbsp;</p><p>More info about cleaning the carbon rods can be found in the <a target="_blank" href="https://wiki.bambulab.com/en/general/carbon-rods-clearance" rel="nofollow noopener">Bambulab Wiki</a></p>

Carbon Shine - Carbon Rod Cleaning Tool

narzędzia 

<p>All my most popular xmas trees in one place! Small updates where needed. Scale to desired size! Merry Christmas!!</p>

⍋ Ultimate Vase Mode Christmas Tree Collection ⍋

ozdoby

<h4>Modular Design.</h4><figure class="image image_resized" style="width:78.97%;"><img src="https://makerworld.bblmw.com/makerworld/draft/119940/2023-10-25_qmbowfau371w.jpg"></figure><h4>Room for fuzzy skins.</h4><figure class="image image_resized" style="width:77.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/119940/2023-10-25_oml34vcgadbg.jpg"></figure><h4>Drain Reservoir in back.</h4><figure class="image image_resized" style="width:77.18%;"><img src="https://makerworld.bblmw.com/makerworld/draft/119940/2023-10-25_z3eyiggo8vua.jpg"></figure><h4>Enjoy!</h4><figure class="image image_resized" style="width:82.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/119940/2023-10-25_59ql00txs3ts.jpg"></figure><p>No time? Here's a VASE MODE version that prints fast! <a href="https://www.printables.com/model/464081-hex-tiered-planter-vase-mode" rel="nofollow">https://www.printables.com/model/464081-hex-tiered-planter-vase-mode</a></p><figure class="image image_resized" style="width:66%;"><img src="https://makerworld.bblmw.com/makerworld/draft/119940/2023-10-25_qlkz47q5neoi.jpg"></figure>

Pop-Out Hex Herb Garden w/Drainage

kwiatki 

Kocyns

<h3>Basic info:</h3><ul><li>Toroidal propeller launcher with double planetary gearbox.</li><li><strong>Update: Part 13-256.stl </strong>- extended stick for bed 256x256mm (A1/P1/X1).</li></ul><figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-12-17_c4bb05a73c6fe.gif"></figure><figure class="image image_resized" style="width: 39.63%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_83uzwi9s2ww6.gif"></figure><p>&nbsp;</p><p><strong>Gearbox:</strong></p><ul><li>Non-printable parts: You just need one type of screws (M3x16 Countersunk screw, DIN 7991) for assembly.</li><li>Gear ratio 1:12 with smooth move.</li></ul><figure class="image image_resized" style="width: 28.52%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_zynkq0o8slne.gif"></figure><h3><strong>Printing:</strong></h3><ul><li>No supports!</li><li>Layers height are 0,12-0,2mm.</li><li>Recommended material for gears is PETG, see below to BOM.</li></ul><h3>BOM:</h3><figure class="table"><table><thead><tr><th colspan="4">Printed parts/Purchased parts</th></tr><tr><th style="border: 1px solid #000000">Item</th><th style="border: 1px solid #000000">File</th><th style="border: 1px solid #000000">Qty</th><th style="border: 1px solid #000000">Description</th></tr></thead><tbody><tr><td style="text-align: center">1</td><td>1.stl</td><td>8</td><td>PETG</td></tr><tr><td style="text-align: center">2</td><td>2.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">3</td><td>3-Ring-up.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">4</td><td>4-Ring-down.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">5</td><td>5.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">6</td><td>6.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">7</td><td>7.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">8</td><td>8.stl</td><td>1</td><td>PLA (1)</td></tr><tr><td style="text-align: center">9</td><td>9.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">10</td><td>10.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">11</td><td>11.stl</td><td>1</td><td>PLA</td></tr><tr><td style="text-align: center">12</td><td>12.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">13</td><td>13, 13Low ,13-256</td><td>1</td><td>PETG (2)</td></tr><tr><td style="text-align: center">14</td><td>14.stl</td><td>1</td><td>PETG</td></tr><tr><td style="text-align: center">15</td><td>Tor_170.stl, Tor_200.stl</td><td>1</td><td>Propeller (3)</td></tr><tr><td style="text-align: center">-</td><td>Tor_base.step</td><td>-</td><td>to create remixes</td></tr><tr><td style="text-align: center">16</td><td>Screw M3x16</td><td>11</td><td>Countersunk screw (DIN 7991)</td></tr></tbody></table></figure><ol><li>Recommended high of layers 0,12mm</li><li><strong>13Low.stl </strong>is for printer bed size under 250x210mm. <strong>13-256.stl </strong>- extended stick for bed 256x256mm (A1/P1/X1).</li><li>170mm or 200mm toroidal propeller +105mm. Recommended high of layers 0,12mm.</li></ol><h3><strong>Assembly:</strong></h3><p><strong>STEP 1:</strong></p><figure class="image image_resized" style="width: 40.15%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_wkmqsgwz6zyl.png"></figure><figure class="image image_resized" style="width: 40.03%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_lbjrwlyynvsa.png"><figcaption>Note: Screw (red) in detail A shouldn&#39;t be too tight!</figcaption></figure><p><strong>STEP 2:</strong></p><figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_ozf5yzznmp1z.png"></figure><p><strong>STEP 3:</strong></p><figure class="image image_resized" style="width: 40.02%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_oog17ne6f0uq.png"></figure><p><strong>STEP 4:</strong></p><figure class="image image_resized" style="width: 39.99%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_sstcnap2p6qk.png"></figure><p><strong>STEP 5:</strong> Let&#39;s fly!!</p><figure class="image image_resized" style="width: 40.14%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000077780/design/2023-11-29_4qb6fj7yq7z3.png"></figure><h3>Commercial uses:</h3><p><span style="background-color: rgb(255,255,255); color: rgb(33,43,54); font-size: 16px">If you want permission for commercial use: </span><a target="_blank" href="https://www.patreon.com/kocy/" rel="nofollow noopener">patreon.com/Kocy</a></p><p>&nbsp;</p><p>&nbsp;</p><p>Note: <span style="color: rgb(55,65,81); font-size: 16px">By downloading and using the model, you agree that it is provided &#34;as is,&#34; without any warranties. The authors of this model are not liable for any accidents, damages, or other issues that may arise from its use. Users are encouraged to exercise caution and use the model responsibly. The author disclaims any responsibility for any losses or damages incurred through the use of this product.</span></p>

ToroSpin Turbo - Launcher with planetary gearbox

urwisy

Black Jack

<p>This is an old school type of large material transport truck based on the <a target="_blank" href="https://makerworld.com/en/models/40767#profileId-40773" rel="nofollow noopener">Yellow Zil Truck Chassis</a> model that I have released earlier. In that release itself I have explained how it is the universal platform on which various payloads can be added for specific function. This release contains the large material transport/pipe payload of the same.</p><p><strong>If you have already downloaded and printed </strong><a target="_blank" href="https://makerworld.com/en/models/40767#profileId-40773" rel="nofollow noopener"><strong>Yellow Zil Truck Chassis</strong></a><strong> model, You would only need " Pipe_Truck_payload.3mf" file and Please skip to the title</strong> ASSEMBLY OF PAYLOAD.</p><h3>Three ways to print</h3><ol><li><strong>As single piece</strong>:- Please download STL file but there wont be any movements.</li><li><strong>Multiple Pieces</strong> :- Download 3mf file with Full_dismantled.3mf.<strong>BEST QUALITY OUTPUT</strong>. Please use the 3mf file for assembly also.</li><li><strong>Combined</strong>:- You may use any 3D viewer software like 3D builder in windows to merge components according to your printer and filaments. The sky is the limit for this.</li></ol><h2><u>ASSEMBLY OF MODEL</u></h2><p>There are four stages of assembly.Follow the GIFs for assembly of payload.</p><p>&nbsp;</p><h3>1)CHASSIS ASSEMBLY</h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/142401/2023-10-21_f49b00d929772.gif"></figure><h3>2)<strong>MAIN RIG ASSEMBLY</strong></h3><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/142401/2023-10-19_ocph5ah7r1s7.gif"></figure><h3>3)<strong>FOLLOWER RIG ASSEMBLY</strong></h3><p>The size of pipe is 32.2mm outerdia and 28,2mm Inner dia. If you have any plastic pipes around, maybe you can think of scaling the model to make use of those pipes. Also you can substitute pipes with objects like wind mill blades.</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/142401/2023-10-19_8qhls99tzedd.gif"></figure><h3>4)MATING WITH CHASSIS</h3><p>Follow the GIF for mating of payload with truck chassis. You can reuse the bolt securing the Bed in the <a target="_blank" href="https://makerworld.com/en/models/40767#profileId-40773" rel="nofollow noopener">Yellow Zil Truck Chassis</a> model to secure the payload. But you have to print some spacers. You should use small black rope to secure the pipes. I have given branches to tie the rope.</p><figure class="image image_resized" style="width:81.02%;"><img src="https://makerworld.bblmw.com/makerworld/draft/142401/2023-10-19_3u8eq4cbjgoc.gif"></figure><h3> </h3><h3>Movements Included</h3><ol><li><strong>Front Wheel Steering</strong></li><li><strong>Engine Bay Cover Swing Open</strong></li><li><strong>Rotating Fifth wheels of Rigs</strong></li></ol><p><strong>NOTE</strong> The tolerances to some elements are zero which has been intentionally provided to friction lock the elements while not in movements. You may have to fine tune the tolerance from your end using scaling function in slicer to ensure good fit without compromising movements. This also applies for the pins that make rotation possible between elements. Please proceed with printing all the pins after testing printing a pin and testing the fit of a joint. You should be able to find the adequate scaling factor with this.</p><p>The main body is made hollow to ensure filament savings.</p><p>Supports should be provided as required.</p><p>Appreciate the makes uploads. Open for suggestions.</p><p>&nbsp;</p><p><a target="_blank" href="https://www.buymeacoffee.com/blackjack123" rel="nofollow noopener"><img src="https://media.printables.com/media/prints/619379/rich_content/68e9b60f-8d72-4428-ab2a-b4c1a4545a5c/download-assets-sm-1.png#%7B%22uuid%22%3A%22f99eae12-df72-4cef-afbd-b981037f2be2%22%2C%22w%22%3A260%2C%22h%22%3A73%7D"></a>  <a target="_blank" href="https://www.patreon.com/BlackJack123" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/142401/2024-02-10_725a26b577d66.png"></a></p>

Yellow Zil Pipe Truck with Movements

papsjundi

<p>If you have experienced your spool being pulled up (against the lid) in your AMS when there's little left on the spool… then this Mods maybe just for you.<br><br><span style="background-color:hsl(0,0%,90%);"><strong>This solution may or may not work… it is work in progress!</strong></span><br><br><span style="background-color:hsl(0,0%,90%);"><strong>Updates at the bottom, please check it out before printing</strong></span></p><p>&nbsp;</p><p>This is a simple design, that hopefully will work for you.<br>It has 2 parts, the “anchor” and the “Bar”<br> </p><p><img src="https://media.printables.com/media/prints/608216/rich_content/d71c5ecf-c913-4b38-9e3b-1b3dfef2caf4/screenshot-2023-10-08-at-104144-pm.png#%7B%22uuid%22%3A%22144203c7-e7af-4cf1-8059-9dce5fd620a9%22%2C%22w%22%3A2450%2C%22h%22%3A1436%7D"><br> </p><p><br>It took me quite sometimes for me to study / analyze the AMS system… to find the right place where I can “mount” the “anchor” securely, the design it so you can put it on and take it out with relative ease.<br><br>You will need 1 sets for 2 spools, so you want to cover all 4 spools, just print it twice.<br><br><img src="https://media.printables.com/media/prints/608216/rich_content/a66d34f1-bca5-4276-976e-959bd1d135a6/img_5441.jpg#%7B%22uuid%22%3A%22af59297d-2df4-41b5-a6d0-4bd8d074ac91%22%2C%22w%22%3A5712%2C%22h%22%3A4284%7D"></p><p><br><br>Nothing to buy from AMAZON for this 😋, Just print and install on your AMS.<br><br>Please watch the youtube video on how to install it.<br><br> </p><figure class="media"><div data-oembed-url="https://youtu.be/bGoOUiPCfyI"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/bGoOUiPCfyI" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><p><br>I hope you'll find it useful!, <br><br>Thank you!<br><br>Djundi Karjadi<br><br>Update Oct 9 2023:<br>Thank you for many of the feedback I got from the facebook groups! I love that users shared ideas and together we can make it better.<br> </p><figure class="image image_resized image-style-align-left" style="width:50%;"><img src="https://media.printables.com/media/prints/608216/rich_content/96fd0285-41d9-415e-9f35-64ef3b5091bf/screenshot-2023-10-08-at-115922-pm.png#%7B%22uuid%22%3A%2274721b97-b500-4a28-91b6-3c03e9069988%22%2C%22w%22%3A1652%2C%22h%22%3A1184%7D"></figure><p>I am working on adding 608 bearings to the “Bar” to reduce the possibility of additional drag to the spool / motor.  But in the mean time… some users wanted a more rounded face towards the back of the spool… That was an issue because I needed a flat surface facing the bed…<br><br><br><br><br><br><br>I just got an idea, why not split it… and print the bar in 2 parts, then glue them together?<br><img src="https://media.printables.com/media/prints/608216/rich_content/18c937bd-a929-4f9f-9bae-1fb41b9c3b09/screenshot-2023-10-09-at-110017-am.png#%7B%22uuid%22%3A%22e7e66047-3582-4cd0-8bdb-f2848572d916%22%2C%22w%22%3A2340%2C%22h%22%3A1440%7D"><img src="https://media.printables.com/media/prints/608216/rich_content/be55ea68-d5e6-4d09-abe2-90a8ec309d81/screenshot-2023-10-09-at-111706-am.png#%7B%22uuid%22%3A%222e6aa6aa-87ef-4ad6-88e8-33c991be3e39%22%2C%22w%22%3A1924%2C%22h%22%3A1292%7D"><br> </p><p>&nbsp;</p><p>Added 3 pcs of “Jigs” to hold the 2 piece together after gluing… left right and middle</p><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/110961/2023-10-09_b284071ae0b2c.jpg"></figure><p><br><span style="background-color:rgb(255,255,255);color:rgb(42,42,42);font-size:16px;">3MF and Step file updated.</span><br><br>Update Oct 22: a user noticed that I only have 1 set of the Jigs on the plate… added.<br><br><span style="background-color:rgb(255,255,255);color:rgb(42,42,42);font-size:16px;">Thanks!</span><br><br>Thanks!</p>