szibis

SirPrintAlot

Just print one of each file and assemble, the lid for the dog treat box is attaced by pressing it on from the treat box and out there is a small indent that allows it to snap on.

Flexi dog leash waste bag box with treat container

matt thibs

Digital Caliper Battery Cap

Tools

jerrinjms

A simple yet strong monitor stand compatible with IKEA BURHULT. This is an affordable and elegant solution when it comes to desk organization. The height of the stand is 90mm, with 75 mm of space underneath it.&nbsp;<a target="_blank" href="https://www.ikea.com/ca/en/p/burhult-shelf-white-80400042/" rel="nofollow noopener">https://www.ikea.com/ca/en/p/burhult-shelf-white-80400042/</a>&nbsp;IKEA BURHULT is supposed to be 23 1/4x7 7/8 " (59x20 cm), but weirdly enough the one lying around in my apartment was 54.5x19.4 cm. The model included is made with the actual dimensions in mind, with a 0.5 mm offset all around. I've included a SolidWorks model with equations set for the width of the panel as "A". Change that if the model you have is not 20 cm wide.&nbsp;0.5 mm clearance on all sides is a bit too much but can be compensated by adding a few rounds of scotch tape or paper cards cut along the length or both until you have a snug fit.&nbsp;I used 20% infill and 2 wall count. I would recommend more infill but 20% is functional. I use it to hold a 32" monitor.

Monitor stand for Ikea BURHULT

Office

Hamstah

Gridfinity 1x1 boxes with snap closed lids. The boxes are 3U tall (21mm tall from base to lip, excluding the hinge and lid).Lids are attached by inserting a length of 1.75mm filament and sealing with a lighter or soldering iron. The boxes were originally designed to be used as pill boxes for travel, and take magnets in their base and tray as per the Gridfinity standard to keep the boxes together on the tray. Lids snap closed strongly and tightly to keep from accidental opening, but open fairly easily.The lids are designed to open up to 180°, but can also open up to 90° in place in a tray, making a 2 unit wide tray ideal for boxes back to back or with other Gridfinity items.&nbsp;The baseplates depicted in the cover photo can be found at <a target="_blank" href="https://makerworld.com/en/models/43181" rel="nofollow noopener">https://makerworld.com/en/models/43181</a>

Gridfinity Box (1x1 3U) with Lid

Gridfinity

Cables

vojta.suchomel

It's necessary to use transparent filament This is a print profile for a solid block of the material, achieving higher mechanical strength and transparency for transparent materials, The critical factor is 107% flow of the material, Slower speed, and a bit higher print temperature. You can use it on your own model, For example, optical lenses, Solid blocks with hollow inside, etc. You can slightly tune it by yourself, for example slower print speed 10-15mm/s, or use higher extruder temp. 260°C. For post-process, you can sand it with sandpaper, and for a totally clear look use a hot airgun, lighter, or torch.

PETG Transparent print by FDM

Glass

Steve_3D

A very simple and easy to print bag-clip.Added 3 different thicknesses vor bigger oder smaler bags.&nbsp;V2.0, 31.12.2023I sent the bag-clip to the gym over Christmas and it has built up a some muscles 😁. He is now stronger. What do you think of this muscle-version?&nbsp;Update 21.01.2024, storage-containerHow do you store alle the bag-clips?Just have a look to my <a target="_blank" href="https://makerworld.com/en/models/150697#profileId-164385" rel="nofollow noopener">“Yet another bag-clip” container</a>:<a target="_blank" href="https://makerworld.com/en/models/150697#profileId-164385" rel="nofollow noopener">https://makerworld.com/en/models/150697#profileId-164385</a>&nbsp;

Yet another bag-clip

Home