sysless

CippyO

This design is based on konseben's original design, that was working fine, but i wanted to fine tune it a bit. Print it with at least petg, as pla will melt there under load.here are the changes that i made:made it 0.18mm longer(35.62mm to 35.8mm) moved the C side pin 0.4mm outwards, for better alignment longer pins(7mm from 2mm) smaller corner radius(0.5mm from 0.75mm) moved, shrunk C connector hole, for thicker, stronger partUpdate: The v2 design is just to add better compatibility with different printers. I modified the pins to have different size, depending on your printer's accuracy, you can choose between 5 different size: the original and +/- 0.1mm or 0.2mm.&nbsp;i also included the step file as konseben did, so further refinement can be done if needed.

ROG ALLY dock cover v2

ROG Ally

Think3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.Start with Black At layer #7 (0.64mm) swap to Blue At layer #11 (0.96mm) swap to Red At layer #15 (1.28mm) swap to White for the rest.&nbsp;___________________________________________________________________________________If you like my work, please consider a small donation :) Thank you very much :*<a target="_blank" href="https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8" rel="nofollow noopener">https://www.paypal.com/donate/?hosted_button_id=RWRXKCAEM86K8</a>&nbsp;

Goku - HueForge

Hueforge

palmer_inc

Best and Cheapest Cup Holder for Tesla Model 3 Print with Extrudr TPU Hard for perfect. A98 is enough good

Tesla Model 3 Cup Holder (no Highland)

Tesla

Ron Rashi

This is a funnel for Nespresso CREATISTA milk steamer.It pops onto the pre-cut hole of the machine, and prevents the steamer from splashing everywhere.

Nespresso Creatista Milk Steamer Funnel

Nespresso

SaEire

slight remix (just organised per plate for plates 256mm +) of original for Box and cutter for various kitchen foils/films from Printables spTim&nbsp;Sizes organised per plat for 330mm and 390mm depending on what size you need&nbsp;Printed in PETG with 4 walls for the flexibility and strength of been thrown in and out of a cupboard daily.

Box and Cutter for Plastic Wrap Film, Cling Film, Aluminium Foil or Parchment paper

Kitchen

ABDELat

All gridfinity basic bins, starting with 1x1x1 up to 6x6x12. Each file includes all heights from 0 (lid) to 12 (87.55 mm).&nbsp;These bins don&#39;t have magnet/screw holes. As long they are used for Drawers or non-moving places you don&#39;t need them.<ul><li>no labeling tab</li><li>labeling tab on the left side</li><li>labeling tab on the right side</li></ul>The generated 3mf-files are all based on this <a target="_blank" href="https://github.com/kennetek/gridfinity-rebuilt-openscad" rel="nofollow noopener">openSCAD rebuild</a>. I&#39;m using them a lot, they work as intended, easy to print.I&#39;ve include all printable profiles. The 6x6 version isn&#39;t currently printable, so there is no printable file. The 3MF-Version of each combination can also be downloaded in the raw-model-files tab.<h4>Bin Sizes in mm</h4>for all that don&#39;t want to calculate the sizes:<img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/760bc579-31a2-4876-9f86-9abd4176c954.png"> <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/44efbb41-6eed-494c-bd99-429ecba1642e.png">&nbsp;If you&#39;re looking for an easy to print grid, i recommend <a target="_blank" href="https://www.printables.com/model/430144-gridfinity-base-with-snap-connectors" rel="nofollow noopener">Gridfinity base with snap connectors</a>. If you have an Ikea ALEX drawer, <a target="_blank" href="https://makerworld.com/de/models/28581" rel="nofollow noopener">here you`ll get all needed parts (inkl. spacer)</a>.&nbsp;Other Tools used:All files are generated with the help of a modded version of <a target="_blank" href="https://github.com/OutwardBuckle/OpenSCAD-Bulk-Export" rel="nofollow noopener">OpenSCAD-Bulk-Export</a>. Check out this git if your interested in bulk-exporting from OpenSCAD&nbsp;Printing:Print it in any material you like. For most applications PLA is good enough. The slicer recommends a brim. With a bit of glue or the textured PEI sheet it doesn&#39;t move.The 6x6 can`t be printed in one piece! Use the Slicer to split it as you like.I´ve in also included print-profiles for all versions.&nbsp;Additional Tools and Helpers<ul><li><a target="_blank" href="https://makerworld.com/models/208796" rel="nofollow noopener">Gridfinity Height ruler - slim Edition</a>: Helps you to find the correct bin height.</li><li><a target="_blank" href="https://makerworld.com/en/models/476336" rel="nofollow noopener">AIO parametric Gridfinty Project</a>: Generate you own gridfinity bin.</li><li><a target="_blank" href="https://makerworld.com/en/models/28581" rel="nofollow noopener">Slim Gridfinity Base for Ikea Alex:</a> Perfectly fitting grid for Ikea Alex Drawer</li></ul>&nbsp;<h3>Parametric Model Maker</h3>I&#39;ve made a SCAD Version to work with the new <a target="_blank" href="https://makerworld.com/en/makerlab/parametricModelMaker" rel="nofollow noopener">Parametric Model Maker</a>. Just download the “Makerworld.scad” (from Raw Files) and use it there. In the Customize Section, you can change most parameters the get the desired Bin you want. Use the button right next to do Download or <a target="_blank" href="https://makerworld.com/en/makerlab/parametricModelMaker?designId=47599&amp;from=model_page&amp;scadUrl=https%3A%2F%2Fmakerworld.bblmw.com%2Fmakerworld%2Fmodel%2FUSd2da6c53f14d3c%2Fmsfile%2F2024-04-16_1fd4308bde644.scad&amp;type=user" rel="nofollow noopener">use this link.</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/2024-05-10_09f49611aee0f.webp"><figcaption>Quick preview of the parametric model maker</figcaption></figure><h3>How to download the RAW files</h3>Since the last UI change the download option is a bit hidden. This is the current way to download the RAW files or the File for the <a target="_blank" href="https://makerworld.com/en/makerlab/parametricModelMaker" rel="nofollow noopener">Parametric Model Maker</a>.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000047599/design/2024-05-03_e07cda6ec065f.jpg"></figure><h3>Share your makes and support me</h3>If you like my work, give it a 🚀 boost 🚀 (the button is right below the Download). You can <a target="_blank" href="https://brickbank.app/support/" rel="nofollow noopener">support me here</a>, via <a target="_blank" href="https://ko-fi.com/brickbankapp" rel="nofollow noopener">Ko-Fi</a> or <a target="_blank" href="https://patreon.com/brickbankAPP" rel="nofollow noopener">Patreon</a>. Please leave a comment or share your makes 😁.  I appreciate your support! If your interested in selling the printed models DM me.&nbsp;Updates:2024-02-04: in the raw files section you can find premade zip-files wiht all generated boxes for each size, starting with 01x01x00 up to 12x12x12. This should help to create any box combination you like. Note: not all files can be printed as one piece! All zip files together are ~ 1.25GB i recommend to download them one by one!

Ultimate Gridfinity Bins Collection + Parametric

Gridfinity

squinn

This print-in-place locking bag clip has been designed so that it can be printed without supports, has a fun curvy shape, uses an outward angled handle for easier one-handed use, and is a nice size at just under 6 cm when closed.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/user/3485677045/draft/2023-09-21_kei37ynb43g3.gif"></figure>I'd recommend you set the “Strength→ Wall Loops" option to at least 5 for increased strength. In addition to the STL, I'm also attaching the Fusion360 file if you'd like to make adjustments.&nbsp;The original “Cam Lock Bag Clip.stl” (which I'd still recommend you start with if you're printing in PLA) is designed with a .2 mm tolerance around the pivot joints. If you have trouble with the plastic fusing in your print conditions though or are printing in other materials - such as PETG, I've now also attached two versions that increase the spacing tolerance slightly (.3 mm and .4 mm) which you could use as an alternative.&nbsp;This is a complete from-scratch design, but there are many great cam locking clips. Although notably different, I've marked this model as a remix of the very cool model that ‘jfedor’ did which used a similar approach for making a clip printable without requiring supports (which itself was a remix of Andrei's popular version that does require supports).

Curvy Cam Lock Bag Clip

Utils

Encrust3d

This is a slim poop bucket for the A1 printer that I made to fit perfectly between my new A1 printer and my Ikea pax cabinet. There isn't much room where I have my printer and I needed a poop bucket that was slimmer than any other online, so I made this in Fusion 360. This model is compatible with the top mount AMS lite hardware. If you would like an extended version of this, you can download it here: <a target="_blank" href="https://makerworld.com/en/models/106061#profileId-113236" rel="nofollow noopener">https://makerworld.com/en/models/106061#profileId-113236</a>&nbsp;1/14/24: uploaded no logo version