The default angle of the blade when using the Bambulab Mag-Alloy Scraper is too shallow, and while it avoids causing damage to the plate it instead often causes slight damage to the printed model because the blade doesn't go below the first layer. I've designed a clip-on guide that creates the perfect angle to get the blade underneath the first layer, without damaging the plate.

I've designed a new "cable chain PTFE tube protector for X2D" because I wasn't happy with the existing options. The curved PTFE guides can cause collision and tension between the main and aux PTFE tubes, and can cause unusual forces on the extruder connectors. The cable chain PTFE clips are brittle and can cause undesirable bending of the PTFE tubes in some situations. The PTFE protector rings are good, but they still scrape against metal and also tend to snag on each other and get moved around.

Wasn't quite happy with any of the existing wavy stands for moon lamp, so I've made a new one that is very highly customizable right here within MakerWorld. Allowing you to experiment, print and share some pretty beautiful and exotic shapes.

There's already more than enough moon lamps on MakerWorld, but none of them seemed perfect... so I designed one from scratch. Both 18cm and 25cm. For ceiling, table or pendant. Very high resolution model. No defects at the pole. No layer banding closer to the pole. Support structures to improve surface quality. Small opening with hidden mounting mechanism for more spherical appearance. Twist-click-lock mechanism. Updated and refined NASA moon data. Recessed mounting options, and more.

Measuring humidity in dry boxes with silica is great for tracking the saturation of the silica beads, however, the hygrometers are not free and changing the battery is a PITA... especially if you need to "disassemble" the dry box to do it. So I made a simple hygrometer that can be easily moved by hand between dry boxes (YASHE 3.7L).

I wasn't really happy with the existing dry box spool holders for YASHE 3.7L and wanted to come up with a different design. I think the result was a success. Only 35g, almost universal spool compatibility up to 1kg, maximal surface area for desiccant, space for vast amounts of desiccant and I've also made an A1 mini compatible print variant that I use myself. The result is rather sleek and striking if you ask me 😊

I modded my A1 Mini with a Noctua fan and made this fan cover to reduce the high-pitched whine the extruder fan can emit. My A1 Mini only has a very pleasant air flow noise during printing now.