sxburk

Fresh3Design

Storage Rack for 5x5 Gridfinity base plates. Can hold 4 plates (100 boxes total).&nbsp;-PETG or stronger recommended.-Print x2 of each braces, lay on side for strength.-Print x1 of each side panels.

5x5 Gridfinity 4 Tray Storage Rack

gridfinity

Guenther 3D-Druck

DE: Flaschenständer für SodaStream Easy Flasche&nbsp;Einfacher Ständer für eine SodaStream Easy Flasche und Deckel. Die Flaschenöffnung und auch der Deckelhalter wurden mit etwas Spiel konstruiert, damit sich alles einfach ein- und aufstecken lässt.&nbsp;Layerhöhe: 0,20 mm Wandgenerator: Arachne Wandlinien: 3 Obere Schalenschichten: 4 Untere Schalenschichten: 4 Fülldichte: 10 % Gyroid Stützen: Baum (Auto) Nur auf Druckplatte: Ja Randtyp: Keine Umrandung&nbsp;=================================================&nbsp;EN: Bottle Rack for SodaStream Easy Bottle&nbsp;Simple stand for a SodaStream Easy bottle and lid. The bottle opening and the lid holder have been designed with some play so that everything can be easily inserted and removed.&nbsp;Layer height: 0.20 mm Wall generator: Arachne Wall lines: 3 Upper tray layers: 4 Lower tray layers: 4 Filling density: 10 % Gyroid Supports: Tree (Auto) Only on printing plate: Yes Border type: No border

Flaschenständer für SodaStream Easy Flasche

Sodastream

V3 Precision

This is a spool winder for transferring filament from one spool to another. Inspired by the need to use certain filament spools for the Bambu Lab AMS. This build should speed up the process and give a nice tight winding. There is room for improvement, so feel free to give some feedback either on Printables or on the Youtube videos.This version is 100% 3D printed (not including the mounting screws). Future versions will use bearings and possibly a motor to drive the gears.The images show the assemblies mounted to a 2x6 for testing. The assemblies can be mounted to a similar board or to a base made from aluminum extrusions.&nbsp;Printing RecommendationsI used PLA while developing the spool winder. I would recommend using PETG, or Nylon CF, or other stronger, stiffer filament.The ‘worm’ gear can be tricky to print. In Bambu Lab Studio, I set the part upright and set support to tree (auto) and threshold angle at 10. Set a brim at 8mm.The gears are easy to print and require no support or post processing.The bases need some support and did well with tree (auto) and threshold angle of 30.I used 4 walls and 15% infill on most pieces. The thumbscrews I used 100% infill.&nbsp;AssemblyMost of the assembly is easy and self-explanatory.Note that the rear driven gear is reverse threaded.Specific instructions can be found in an upcoming Instructions Video …….There will also be a link to the video on the V3 Precision website.&nbsp;#best3dp2023<figure class="media"><div data-oembed-url="https://youtu.be/3llHdgb1ftQ?si=rh9tLXTMeOSzBDXe"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/3llHdgb1ftQ" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><figure class="media"><div data-oembed-url="https://youtu.be/ru2TtLahlmw?si=5opj3V5R-Ab6cPFX"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/ru2TtLahlmw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

gridfinity

Sodastream

Spool Winder