sucatkane

AJAX3D

This is my jig for creating your own HueForge side plates. Just right click on my dragon HF and select replace STL and load in your own image. Delete my color swaps and add your own. Set your filament colors and type and print. Enjoy!

HueForge RMRRF Drag Racer Side Plate Jig

death racer

coryfowler2

Holds your sauce while driving. Clips into your car vent. Recommend PETG or ASA/ABS filament due to heat in the car on a summer day.

Dipping sauce holder

car stuff

Reuter_Corp.

<h2>Mandala - Unicorn</h2>6 Layers each 2mm&nbsp;EnjoyHappy printingSee you next one

Mandala - Unicorn

wall art

FlorinV

Spider stencil for airbrushing.&nbsp;<ul><li>0.6 mm height. Print in 3 layers of 0.2mm (tested by me on Bambu), but feel free to try other setups. Make sure your printing surface is degreased, to be sure you don't have issues with first layer details. </li><li>scale up to your needs, but don't forget to keep the height if you don't want to make it thicker intentionally. </li></ul>

Spider stencil for airbrushing

stencils

Want to add a longer barrel to your X-Shot Longshot?Want the barrel held in place securely with a nylon thumbscrew such as used in the Lynx or SLAB?This is what you need!&nbsp;We have included a version for M3 and M4 thumbscrews/nuts so you have options. If other sizes are required then let us know and we will try and get it sorted for you. We can even print them for you if you get in touch :)Requires an M3/M4 nut and an M3/M4 Nylon Thumbscrew (10mm).<ul><li>edit - Slightly tightened the hole around the barrel</li></ul>Any issues etc you may encounter then please get in touch so we can get them sorted but in our testing, they seem to be working fine.<a href="https://linktr.ee/fancyimpactblasters" rel="nofollow">https://linktr.ee/fancyimpactblasters</a>&nbsp;&nbsp;

X-Shot Longshot Extended Barrel Front End

xshot

AngelicAnarchy

I wanted an AMS Riser that would give me amazing visibility into the printer through the top glass along with the ability to add an LED strip to light the print area up like the sun. So, I remixed this model to push the AMS back and added an angled surface to mount the LEDs to, with a cutout for the start of the strip and cable routing.&nbsp;Along the way, I also:<ul><li>Added a storage location to hold 2 additional build plates </li><li>Added an optional spool holder with filament guide (for printing TPU or from odd sized spools)</li><li>Maintained the shelves to hold the glass top open for cooling</li><li>Redesigned the assembly procedure </li><li>Kept the total filament usage under 600g!</li></ul>

AMS Riser - Enhanced Visibility w/ Accessories!

upgrades

Wall_Art_3D

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThis Is Just the image from the slicer, after printing it will be much more charming!<figure class="image image_resized" style="width:27.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/416844/2023-12-27_4521197ff31d9.png"></figure><figure class="image image_resized" style="width:25.39%;"><img src="https://makerworld.bblmw.com/makerworld/draft/416844/2023-12-27_c9945b91a22b08.png"></figure>Swap Instructions: Start with Black At layer #9 swap to White for the rest.

death racer

car stuff

wall art

stencils

xshot

upgrades

things