strongerthanall

Hanti_3d

Description In order to solve the annoying problems with cardboard spool filaments, here it is the final version of the spool ring, that solved all my problems of spools getting stuck into the AMS. CompatibilityTested to work with the cardboard spools from the following filament brands:<ul><li>3DE Premium</li><li>3DQF</li><li>Anycubic</li><li>Canadian Filaments</li><li>Comgrow </li><li>Creality</li><li>Duramic</li><li>Elegoo</li><li>eSun</li><li>ERYONE (Need to scale: X: 199.80 (98.91%) Y: 199.80 (98.92%) Z: 5.5 (100%))</li><li>Filamentive</li><li>Filaments.ca</li><li>Flashforge</li><li>FIXDRY</li><li>GNVTNTP</li><li>Inland</li><li>Jayo</li><li>Kexcelled</li><li>KYUUBI</li><li>Matter3D</li><li>OtterTek</li><li>Overture</li><li>OVV3D</li><li>Polymaker (e.g. PolyTerra / PolyLite)</li><li>Print Bed</li><li>real Filament</li><li>Redline</li><li>Reflow</li><li>Smartfil</li><li>Sparta3D</li><li>X3D</li><li>Ziro</li><li>(Jessie filament spools are too wide for the AMS)</li></ul>If you find this works with a brand of filament with cardboard spools that&#39;s not listed here, please leave a make or a comment and I will add it to the list! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000115242/design/1e191ab6-93e3-4dc3-a229-3927f7e574e0.webp">

AMS Spool Cover v2

bambu mods

kenkamm

This is a very simple spool adapter for use in the AMS, to allow the use of Overture cardboard spools.&nbsp;<ul><li>Prevents AMS errors</li><li>Allows smooth rolling in the AMS</li><li>Very quick to print</li><li>Snaps on, no glue required to hold it in place</li><li>Reusable</li><li>Uses very little material, only 6.5g.</li></ul>

bambu mods

spool rings