NicoM1989

<h2>When printing, there may be a collision with the clamps in the upper area if the print object is smaller than Z=2.5mm. </h2><h2><a target="_blank" href="https://makerworld.com/en/models/489707#profileId-403001" rel="nofollow noopener">A1 Dual Building Board Clamp </a></h2>Attention ! Normal PLA will deform due to the print bed temperature.  Uses PETG, ABS or ASA&nbsp;Update to version 1.2 - Design adapted- Print speed optimized- Fixed collision during flow calibration The Bambu Lab A1 is a great printer, but unfortunately it takes countless attempts to lay the build plate straight.That&#39;s why I designed this clip. The clip is mounted in the upper right corner.The clip takes 1h18m to print and requires 15g of filament.&nbsp;----------------------------------------------------------------------------------------------------------------------------------<h2>Beim drucken kann es im oberen Bereich zur Kollision mit den Klemmen kommen, wenn das Druckobjekt kleiner Z=2,5mm ist. </h2>&nbsp;Achtung ! Normales PLA wird sich aufgrund der Druckbett Temperatur verformen.  Nutzt PETG, ABS oder ASA&nbsp;Update auf Version 1.2 - Design angepasst- Druckgeschwindigkeit optimiert- Kollision bei Durchflusskalibrierung behoben Der Bambu Lab A1 ist ein toller Drucker, leider braucht man unzählige Versuche die Bauplatte gerade aufzulegen.Aus diesem Grund habe ich diesen Clip entworfen. Der Clip wird in der oberen rechten Ecke montiert.Der Clip benötigt 1h18m Druckzeit und benötigt 15g Filament.&nbsp;&nbsp;

A1 Building Board Clamp

finished

FallenAngel

Suspended 2 (Mario Terrain 1)

Eldenroot

I have tried many “poop deflectors” for my A1/A1 mini printer. Anyway, none of them was fully working with ALL printed materials and in a logn-term period. So, I created a new model with cherry-picks from others. Also, I like Bambulab brand, so this model was debossed with a nice logo on the side.&nbsp;New small deflectors were added on the inner part, this is a great improvement - no more sticking poops on the side plate. Also, the design of connector and the size of part which is attached to the printer was a little modified for easier installation.&nbsp;Multicolor ready, monocolor compatible. Choose your preferred option.&nbsp;Description:<ul><li>easy and fast print</li><li>lightweight design</li><li>ultimate efficiency</li><li>secured fixation - more safety during prints</li></ul><h3>…POOP WITH STYLE!</h3>

A1/A1 mini - Ultimate Poop Deflector

3D utillity

BigSarge207

please read all of the information below before printing.&nbsp;FYI - Profile indicates 5hrs print time…that&#39;s for all of the option plates. If you print the tall version with the logo the actual print time is 1hr 13min. The short version with no logo takes 41min. &nbsp;This is my versions of a hygrometer stand/holder. I&#39;ve created various versions included in the print file for either AMS or desktop use. The AMS version stands up straight and slips out of the AMS easily when a battery change is necessary. The desktop version is angled back a bit for stability and includes a tall and short version. Either AMS or Desktop version includes a Bambu logo or logo-less option. For those wanting the logo option I&#39;ve included a plate for a standard print quality logo, quite adequate for in the AMS or a higher quality for the desktop version.&nbsp;I&#39;ve experimented with the settings and suggest you leave them as assigned with one exception… There is a test plate for the hole diameter of the hole the hydrometer will friction fit into. I suggest you print the test plate first. You&#39;ll see I&#39;ve set the hole XY compensation to -0.1 for each stand including the test plate. If you print the test plate and your hygrometer fits loose adjust the XY compensation found in the quality setting further in the negative. If it too tight move the XY comp in the positive direction.&nbsp;The Bambu logo is printed separately and later super-glued in place to reduce printing time. It actually fits firm enough to not need glue but I&#39;d suggest you glue it as soon after print as possible as PLA shrinks and swells with moisture and temperature.

Hygrometer Stand with options for AMS or Desktop

filament

Litolunar

20% fill Without supports. &nbsp;And 100% fill in the logos.&nbsp;Tools needed:<ul><li>Welder</li><li>Tin</li><li>Screwdriver</li><li>Pliers</li><li>Lighter</li></ul><figure class="image image_resized" style="width:50.93%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_6adf9eb4af93f.jpg"></figure>&nbsp;Materials:<ul><li><a target="_blank" href="https://es.aliexpress.com/item/1005001411945792.html?spm=a2g0o.order_list.order_list_main.372.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">High intensity LED</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/32807032859.html?spm=a2g0o.order_list.order_list_main.380.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">Battery</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/32806159516.html?spm=a2g0o.order_list.order_list_main.467.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">Battery holder</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/1005005341202402.html?spm=a2g0o.order_list.order_list_main.386.138b194d28Gq5c&gatewayAdapt=glo2esp" rel="nofollow noopener">Usb c board</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/1005006132144823.html?spm=a2g0o.productlist.main.7.595ft8PKt8PKfZ&algo_pvid=9937444f-0632-4cc7-a0e9-251359c48c22&algo_exp_id=9937444f-0632-4cc7-a0e9-251359c48c22-3&pdp_npi=4%40dis%21EUR%213.46%211.83%21%21%2126.55%2114.02%21%402103854617103473858987211eea8e%2112000035902824343%21sea%21ES%21197670400%21&curPageLogUid=erA4vf0EDvhZ&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">Switch</a></li><li><a target="_blank" href="https://es.aliexpress.com/item/1005005911075741.html?spm=a2g0o.productlist.main.1.337c5f14Q6DWcP&algo_pvid=b20bbf03-bccb-4e5b-904d-adf050930eca&algo_exp_id=b20bbf03-bccb-4e5b-904d-adf050930eca-0&pdp_npi=4%40dis%21EUR%212.76%212.68%21%21%2121.13%2120.55%21%402103847a17103475050232872ea920%2112000034811093207%21sea%21ES%21197670400%21&curPageLogUid=o7KVlA7uBmIJ&utparam-url=scene%3Asearch%7Cquery_from%3A" rel="nofollow noopener">Heat shrink</a></li><li>6 x Screws (M6x25)</li><li>6 x brake nuts</li><li>1 x Resistance 10 ohms</li><li>1 x washer</li><li>Electric cables</li><li>Glue</li></ul>&nbsp;<figure class="image image_resized" style="width:61.8%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_e93506f46f363.jpg"></figure>&nbsp;&nbsp;&nbsp;&nbsp;Assembly instructions:&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_c1fd65dc9472f.png"></figure>&nbsp;<figure class="image image_resized" style="width:45.37%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_3b37f1ad28a58.jpg"></figure><figure class="image image_resized" style="width:44.13%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_33c21b9a3f631.jpg"></figure>&nbsp;<figure class="image image_resized" style="width:54.25%;"><img src="https://makerworld.bblmw.com/makerworld/draft/699266/2024-03-13_6776c7a6b3ae1.jpg"></figure>&nbsp;<a target="_blank" href="https://www.instagram.com/reel/C4axH8-NaaX/?igsh=N3BvZW16d3hwZTcy" rel="nofollow noopener">https://www.instagram.com/reel/C4axH8-NaaX/?igsh=N3BvZW16d3hwZTcy</a>&nbsp;&nbsp;

Batsignal with LED kit and battery

Light

SUNLU Official

<div><h1>Summary</h1><div>SUNLU special design to A1 miniVisit www.sunlu.com for more information</div><h1>Print Settings</h1>Rafts: <div>No</div> <pre><code> Supports: <div>No</div></code></pre> Filament: <a href="http://www.amazon.com/s?url=search-alias&field-keywords=SUNLU+PLA%2B" target="_blank" rel="nofollow noopener"> SUNLU PLA+ </a></div>

SUNLU SPOOL HOLDER

AMS lite

reddadsteve

Sylvester James Pussycat, Sr. is a fictional character, an anthropomorphic tuxedo cat in the Looney Tunes and Merrie Melodies series of cartoons.Sylvester appeared in 103 cartoons and most of his appearances have him often chasing Tweety, Speedy Gonzales, or Hippety Hopper. Three of his cartoons won Academy Awards, the most for any starring Looney Tunes character. Sylvester's trademark exclamation is "Sufferin' succotash!"No supports are required. One piece contains built-in supports, an optional part without the built-in supports is also supplied if you want to use your slicer supports. If you have the proper filament colors, no painting is needed.The assembled model is 200mm tall.Enjoy! ...........................................................................................................**Print Instructions:** Supports: No Resolution: .2mm Infill: 10%Notes:**Refer to the notes below for a few helpful printing and assembly instructions............................................................................................................**Building the model**ColorsBlack: (Paramount3D PLA - Black) body_black body_black_without_supports (optional piece without built-in supports) eye_blacks (contains two identical pieces) whiskers_right (contains two identical pieces) whiskers_left (contains two identical pieces) foot_pad_left foot_pad_right ..Red: (Hachbox PLA - True Red) mouth nose ..White: (Overture PLA - White) eye_white_left eye_white_right tail_white body_white hand_left hand_right foot_left foot_right ear_left ear_right hair_back_left hair_back_right ..Pearl: (Protoparadigm PLA, out of business - White Pearl) claws_hands (contains eight identical pieces) claws_feet (contains six identical pieces) ..Pink: (Paramount3D PLA - Harajuku Pink) tongue...........................................................................................................**Printing and assembly tips**Printing tips 1 - No supports are required. 2 - There are some pieces that may need brims or rafts, use your discretion. When setting up my prints I prefer to be conservative, especially since the base of many parts are hidden when inserted into another part. For the smaller parts, a good first layer is helpful.*I used brims on: claws_hands claws_feet hand_left hand_right3 - I used a pearl white color for the claws to hightlight them. A clear transparent with a higher infill may work well, or a silky white.4 - The body_black piece is taller than any of my other models. It fits on my Prusa MK3 but not on the Prusa mini. Be sure to check this part first to ensure your printer can handle the height. The model can be resized down, but be careful to check that the small parts can still be printed... Assembly tips:1 - Take your time gluing the model together and enjoy the process.2 - I used E6000 sticky craft glue to put this model together. The sticky glue allows more time to position the parts than a fast drying superglue. I have 'fat fingers' and a shaky hand, so the sticky glue works out best for me, especially with small pieces. Just remember to leave enough time for the glue to set before combining too many parts.3 - Be sure to insert the body_white (with completed mouth/tongue) into the body_black before attaching the hands.4 - All the claws have round bases. Be sure to rotate the nail in the correct direction when inserting and gluing them in.5 - The whiskers fit perfectly, but need to be positioned correctly to insert them. The flat side from the printer bed faces back. The holes are notched and the whiskers only fit one way. Personally, I had to keep poking around to fit them in but once positioned correctly they slid right in.6 - Refer to the assembly diagrams in the pictures section as well as the uploaded pictures for putting the model together. The model is meant to be glued.Do not hesitate to ask questions, feedback is essential to making better models.&nbsp;

Sylvester the Cat

Papalumpi

Hi there!&nbsp;This is a useful table stand for my signs or any other sign with a thickness of up to 2.8mm.You can add your own text at the front within the Bambu Studio.&nbsp;If you need any further assistance or adjustments, feel free to ask!&nbsp;&nbsp;Enjoy Printing

finished

art

3D utillity

filament

Light

AMS lite

toy

utility