storiemu

vivalatank

Having searched for a moss pole, I was unable to find anything I liked, so ended up designing my own.&nbsp;Still a bit of a work in progress. Its modular so you can print multiple sections (The most I have printed and used on a plant is 3 so far). The design is technically scaleable, but be aware that you may need to go a bit finer if you do (otherwise it prints without supports on the standard 0.2mm strength settings). Images show a fullsized version and a version i printed at 50% and also a version with the stabiliser which you can either keep on the surface of your plants soil or bury it fot extra stability. For the bottom spikes, they are a bit delicate so be aware to screw in via the circular section. all screws can be a little tough as they are quite tight, but you can screw them into place quite nicely as they do ease up with a bit of gentle wiggling. They are an intentionally tight fit.&nbsp;Material, PLA Basic or PLA+ have both worked well, PETG id imaging would also suit. Settings: 0.2mm strength defaults, no supports needed. 0.4mm nozzle. Added a version of the spikes with drainage holes

Modular Plant Moss Pole

plants

Vixvvo 3D

I've created a desk drawer design before, and it received a lot of positive feedback. Building on that success, I've crafted a new version that features three separate drawers for organization! Attach it with double-sided tape or opt for drilling holes for a more permanent fixture. I'm open to hearing your ideas, so feel free to share them in the comments!&nbsp;&nbsp;All Commercial License, Will be available on my Patreon "Vixvvo3D" For a Low Price of 6$/Month. (currently trying to post & model 1/Weeks) <a target="_blank" href="https://patreon.com/Vixvvo3D" rel="nofollow noopener">https://patreon.com/Vixvvo3D</a>&nbsp;

Desk Organizer Drawer

tools

Krookr

<h2>Description</h2>This Silica Box is for the <a target="_blank" href="https://www.printables.com/model/392134-hydra-ams-enhanced-bambu-lab-ams" rel="nofollow noopener">AMS Hydra Mod</a>, but it also works perfectly with the standard AMS.&nbsp;It fits perfectly and the volume is larger than in other versions. There is also a version that support a Hygrometer. This is the Hygrometer I used <a target="_blank" href="https://www.amazon.de/dp/B0BKZXFDVX?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B0BKZXFDVX</a>&nbsp;Each box holds around 100g of silica.&nbsp;<h3>Printing</h3>The version without Hydrometer prints without any supports. The Hygrometer version needs some supports at the top of the round cutout. I used tree support that starts from the print plate.The print profile I added is for the version without hygrometer.&nbsp;Disclaimer: This is a remixed model designed by Thomas: https://www.printables.com/model/423765-silica-dry-box-for-bambu-lab-ams-hydra-and-stock-v

Silica Dry Box for Bambu Lab AMS Hydra and Stock Version

parts

JamesThePrinter

Six versions are available:<ul><li>Little Debbie Christmas Tree - Bite<ul><li>Multi-Color</li><li>Single Color</li><li>No Ornament Loop</li></ul></li><li>Little Debbie Christmas Tree - No Bite<ul><li>Multi-Color</li><li>Single Color</li><li>No Ornament Loop</li></ul></li></ul>Check out the rest of my Christmas models <a target="_blank" href="https://makerworld.com/en/u/1360890085/collections/69417" rel="nofollow noopener">here</a>!&nbsp;&nbsp;Print SettingsMulti-Color Version - To ensure that the sprinkles don't easily break off, I sunk them about 1mm into the frosting. The downside of this is that the first couple top layers of frosting can be messy. To help with this, I used 5 top layers.&nbsp;Single-Color Version - no special settings are required&nbsp; <a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Ivory White PLA</li><li>Bambu Lab Basic Bambu Green PLA</li><li>Bambu Lab Matte Scarlet Red PLA</li><li>Bambu Lab Matte Lemon Yellow PLA</li></ul>

plants

tools

parts

gifts