stevecandy1982

MadMäxchen

WORK IN PROPCESS &nbsp;Part 2 von 3&nbsp;15x15x9 cm Gebäude mit print in place Türe und Fenster.Geeignet für 28-32mm Tabletop Spiele&nbsp;Toleranz der Türe und Fenster: 0,3mm&nbsp;Ich drucke es mit 5% gyroid infill und 3 top Schichten, um Material und Zeit zu sparen.Für eine noch schönere Oberfläche erhöht die Werte einfach.&nbsp;Es werden noch einige Varianten und Terrain in nächster Zeit folgen.&nbsp;Part 1: <a target="_blank" href="https://makerworld.com/de/models/60287#profileId-62445" rel="nofollow noopener">https://makerworld.com/de/models/60287#profileId-62445</a> Part 3: <a target="_blank" href="https://makerworld.com/de/models/60291#profileId-62449" rel="nofollow noopener">https://makerworld.com/de/models/60291#profileId-62449</a>&nbsp;Update: 9.11.23Stl-Dateien hinzugefügtBrücken hochgeladen<a target="_blank" href="https://makerworld.com/de/models/60958#profileId-63162" rel="nofollow noopener">https://makerworld.com/de/models/60958#profileId-63162</a>&nbsp;Update: 25.11.23Holografische Pflanzen:<a target="_blank" href="https://makerworld.com/de/models/74087#profileId-78605" rel="nofollow noopener">https://makerworld.com/de/models/74087#profileId-78605</a>&nbsp;Wünsche euch viel Spaß damit!

Tabletop-Building 15x15x9 cm

Warhammer 40k

Jerryie

Famous skin from Fortnite Peely ready for 3d print<ul><li>Recommended support for the head and legs</li></ul>

Fortnite peely

Fortnite

killingseed

Be the captain for a day. just for fun at a work party, or your next local Comicon. size is like a l/Xl. thanks&nbsp;

Captain America Cosplay mask stl

Helmet

Howell

This is an optimized version of Mandalorian Helmet for people with slight bigger head or nose (like me :) )It is scaled 1,20% bigger and still mantain optimized supports.Print speed are 300 mm/s for all internal a slower for external, I suggest to turn off AUX fan or just put slow to avoid any kind of parts with different aesthetic results.Attached are file to print it in separate parts and optimized 3MF for the accessories (speed have been slowered down due to side parts fallen down when using creator profile).&nbsp;This is the way!&nbsp;FYI: PLA is from Azurefilm, Silk Graphite Grey&nbsp;&nbsp;Update 10/21/2023: Added Print profile for accessories

Mandalorian Helmet - Big size 

Mandolorian 

martin.taichl

This is my model of the Atlantis as seen in Stargate Atlanis tv series. Model is over 60cm in diameter and approaches 3 kilos. It has already built in preparation for the LED lights so if you want to make the towers and stardrive lit, you do not need to tinker with the data at all. It is once again a kit so everything fits together like a lego and no glue is needed. For the easier assembly, please watch the following playlist where the assemble process is described in detail. <figure class="media"></figure>&nbsp;The model comes with a stand though in the end I decided to not use it and display it as it is. Hope you like it.

Atlantis From Stargate Atlantis

stargate atlantis

neil3dprints

Please note this was a collab with Bambu Labs.The printer was provided free of charge for this project. Update 27/12/2022.I've made some amendments to the assembly guide PDF. Added some additional notes on the best way to print some of the parts as well as provided further detail to some sections of the installation process. I've also added a small L or R on the left and right side parts to help people distinguish between them for the MOD installation.I've also added step and stl files for blank ‘Round Side Parts’ in case anyone would like to add there own logo to them.Check out Uncle Jessy's build!&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/Gv7w95ECAoE"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Gv7w95ECAoE" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;This is your new best friend!!!The companion cube mod is a must have for any Bambu Lab P1P owner. And any portal fan.This is purely a aesthetic MOD. You do not need to touch the electronics at all!I've provided a detailed assembly guide as a downloadable PDF. Just download this as you download the STL's. And please please please follow the instructions. It's not a complicated build. Allot of it is common sense. But there will be some instructions that would prove useful to follow in a particular order. I also recommend giving it a quick read before you start printing all of the parts.You will also require superglue for this build.I recommend a couple of spools of grey PETG. A couple of white pla. And a small amount of pink pla. Just refer to the sheet below<figure class="table" style="width:462pt;"><table style="border:1px double var(--input-border);"><tbody><tr><td style="border-bottom-color:rgb(191, 191, 191);border-bottom-width:1px;border-left-color:rgb(191, 191, 191);border-left-width:1px;border-right-color:black;border-right-width:1pt;border-style:solid;border-top-color:rgb(191, 191, 191);border-top-width:1px;height:33pt;padding:0.4em;vertical-align:top;width:462pt;" colspan="3">As a reference each 1 KG spool carrys an average of 330 meters</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">Totals</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Required Material In Meters ( Approx )</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">Grams ( approx )</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">White - PLA</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">618.48</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">1843.07</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15pt;padding:0.4em;vertical-align:top;">Grey - PETG</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">390.93</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">1192.34</td></tr><tr><td style="border:1px solid rgb(191, 191, 191);height:15.75pt;padding:0.4em;vertical-align:top;">Pink - PLA</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">47.72</td><td style="border:1px solid rgb(191, 191, 191);padding:0.4em;vertical-align:top;">142.21</td></tr></tbody></table></figure>All parts are printable on a Bambu Lab P1P.But I did print on the slowest setting on the P1P.If you would like to use an AMS with this MOD, I've been informed you can so with the below additional MODs installed.To sit the AMS unit on top of the printer with the Companion Cube Mod installed.<a target="_blank" href="https://www.printables.com/model/397718-p1p-ams-legs-companion-cube" rel="nofollow noopener">https://www.printables.com/model/397718-p1p-ams-legs-companion-cube</a>To help guide the PFTE tube.<a target="_blank" href="https://www.printables.com/model/333616-bambu-lab-p1p-ptfe-tube-bracket" rel="nofollow noopener">https://www.printables.com/model/333616-bambu-lab-p1p-ptfe-tube-bracket</a> PTFE Tube Y-Splitter. <a target="_blank" href="https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec," rel="nofollow noopener">https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec,</a> this way you can run either AMS or spool.&nbsp;If anyone has any questions or queries, even if you might think it is a stupid question, seriously, just ask me. Send me a DM through Prusa Printers and I will get back to you ASAP. I want people to be able to print this. So if anyone is having any problems, just reach out. I'll be happy to help where I can.If you want to stay up to date with anything I am working on and are perhaps interested in other projects I have in development, please check out my instagram or Twitter.<a target="_blank" href="https://www.instagram.com/neil3dprints/?hl=en" rel="nofollow noopener">https://www.instagram.com/neil3dprints/?hl=en</a><a target="_blank" href="https://twitter.com/NHengist" rel="nofollow noopener">https://twitter.com/NHengist</a>Happy printing. ;-)Neil

Companion Cube P1P Mod ( Bambu Lab )

Companion Cube

Panky1978

Basic Nintendo arcade, without electronic components, it is made of PLA, no supports are needed.Upgrade with arcade stick and buttonsPD: The photos are of a different model with USB sockets and a fan, but the assembly parts are the same.

Arcade Nintendo Switch y Switch Oled

Stuff

captain america schild

Marvel

Julia Ebert

This is a big toy human figure that's inspired by a Lego minifigure. I spent a lot of time making this model from scratch to match the original design while making tweaks for tolerances, printability, and strength. While there were a number of minifigure models I found online, most were not designed for printing, which is a particular challenge for the leg, arm, and hand joints. I'm particularly proud of the universal clip I designed for these, which makes for easy assembly and stiff-enough joints to pose your figure.I designed the clips and tolerances for this model to be printed at 100% (10x original Lego scale), but people have previously had success printing my <a href="https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale" rel="nofollow">10x Lego-like skeleton</a> at smaller scales (eg, 50% or 5x Lego-scale).Now that I have a base model for a Lego-like figure, this opens up a host of options for specific Lego-like figures. If there's something particular you're interested in, leave a comment or send me a message! If you want to make your own modifications, I've included STEP files for all parts (just be sure to give credit for my original design).Fully assembled, this model stands 40 cm (~16 inches) tall. I printed mine with Hatchbox true blue PLA, Hatchbox true red PLA, and Prusament mango yellow PETG.<h4>Printing Instructions</h4>I've included 3MF files for all parts, and parts should import correctly oriented for printing.<ul><li>For PrusaSlicer 2.6+: you just need to load the project file. (This makes use of organic supports, for the legs, which are added with PrusaSlicer 2.6.)</li><li>For other slicers: I've included details about special instructions for all parts, so you should be able to replicate anything necessary for proper printing. Except where otherwise noted, I printed parts in PLA at 0.15mm layer height with 7% cubic infill and without supports.</li></ul>You will need to print:<ul><li><code>32x-connector-pins.3mf</code>: You should need 30 pins for assembly (or 26 if you print the solid head); this has 2 extra just in case. If you have trouble with bed adhesion, add a brim</li></ul><h5>Legs</h5><ul><li><code>legs.3mf</code>: Uses tree supports the top of the lower hole on the leg.</li><li><code>hips.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Body</h5><ul><li><code>arms.3mf</code>: These print with a small surface area on the bed (the wrists), so you might want to add a brim if you have trouble with bed adhesion.</li><li><code>body.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Head & hands</h5><ul><li><code>2x-hands-wrists.3mf</code>: Requires supports on the underside of the wrist clip. Like the limb clips, I recommend printing with PETG (or similar) with 25% infill.</li><li>One of: (all require supports on the underside curve of the head)<ul><li><code>head-face-mmu.3mf</code>: Print the head & face as one part with some sort of multi-material printer (e.g., Prusa MMU or Bambu AMS). Use supports on the underside curve of the head.</li><li><code>split-head.3mf</code> and <code>face.3mf</code>: Print the head (with cutouts) in two pieces. Use pins and glue to connect the halves. Print the face separately and glue it in.</li><li><code>solid-head.3mf</code> and <code>face.3mf</code>: Print the head and face as separate prints. Use supports on the underside curve of the head. Then glue the face parts into the head.</li></ul></li></ul><h4>Assembly Instructions</h4>In addition to the printed parts, you will need cyanoacrylate glue (CA glue/superglue). <h5>Legs</h5><ol><li>Glue the pins into the top of the hip. Add glue to the holes and bottom surface of each of the hip pegs and attach. Important: The slope of each hip peg should be facing out to the sides. If the pins don't want to go together, check that you have this orientation right!</li><li>Use the same gluing approach to attach the limb clips to each side of the hips.</li><li>Gently but firmly press each leg onto the clips. It should snap into place. The hips are symmetric, so you can't put the legs on backwards. This requires a fair bit of force, but you shouldn't need a hammer. If it won't go on, slightly sand or file down the outer head of the limb clip (rather than the inside of the hole on the leg). Warning: The clips are not designed to come out once they're attached, so make sure you're ready.</li></ol><h5>Body</h5><ol><li>Glue the limb clips into each arm, like you did for the legs.</li><li>Glue the wrist onto the hand, with the pins. Because of the relative print orientations here, it's best to use a bit more glue here to make sure it stays on.</li><li>Press each wrist clip into the arm. (They're the same, so you can't put in the wrong hand.)</li><li>Press each arm clip into the body. The body is also symmetric, so you can't put the arms on backwards.</li></ol><h5>Head</h5>If you printed the separate head and face pieces, glue the face pieces into the head. You may need to file or sand some of the face pieces to fit, depending on how well the supports worked.<h4>License Note</h4>This model is marked as non-commercial because I don't want anyone (including myself) having Lego come after them with a lawyer. If you choose to sell prints of this model, you do so at your own risk!

Mega Lego-like Minifigure (10:1 scale)

Lego

xuss46

Contenedor de pilas, para pilas AA y AAA.

Battery holder AA & AAA

Battery holder

davidkelly021

Christmas snowball town holes modelled to allow micro led string lights to be inserted into the house of the town, space in the base of the model for a battery pack

Christmas snow ball town

Christmas 

Filar3D

I created my own version of the now popular suspended prints.&nbsp;This is a ghost or pumpkin face suspended in mid air giving it a creepy look, perfect for halloween!&nbsp;Files:<ul><li>Single STL </li><li>3MF for multicolor prints</li></ul>&nbsp;Print Settings:<ul><li>0.2 Layer height</li><li>Arachne Wall Generator </li></ul>

Suspended Halloween Face

Halloween 

JamesThePrinter

This set of squares all rotate independently. Each face has a different pattern to give a varying tactile sensation as you twist and play with it:<ul><li>Spiral</li><li>Sunburst</li><li>Wavy Lines</li><li>Stripes</li><li>Bubbles</li><li>Hexagons</li></ul>&nbsp;This was designed with 0.25mm clearances, so it prints easily with no special settings.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The filaments used in the picture above are:<ul><li>MatterHackers Quantum Green Raspberry PLA</li><li>Amolen Purple Blue PLA</li><li>polymaker PolyTerra Pastel Banana PLA</li><li>polymaker PolyTerra Sapphire Blue PLA</li></ul>

Fidget Squares

Fidgets

Officina23

A simple model to hold pots of succulents on three levels (maximum diameter 68 mm). Each housing has a water drain that runs down to the central base. Printing does not require supports, presents no difficulties and with the slicing software it is very simple to add personalized texts on any surface.

Succulent Pot holder 3 places

Plant Pot

jbogusz

This is a deck box for Pokemon cards. It holds about 2 full decks. The top snaps on. This is quick and easy to print. It is printed in 4 parts across 3 plates of White, Red and Black. The bottom and button in white, the top in red and the ring in black. The ring is glued into the bottom white piece. The button is glued to the black ring after the ring glue sets and with the red top put on and closed. Center the button in the space and glue it. Load with cards and battle on!

Pokemon Deck Box

Pokemon 

PrintThatBoii

This is a scalable Christmas tree with shoes because everything is better with some shoes and a face XD. The first tree is at scale 75% the middle is at 100% and the right one is at 50%. You can go bigger if you want. note that the smaller you go the harder it is to get the shoes in. At the scale of 50% you have to push a bit harder than the one on 100%. 3D PRINTING:You can print this with a layer height of 0.2 (for the 50% tree and the shoes) or 0.3mm. You don’t need supports. I would recommend dropping the shoes 1mm lower in the slicer as the shoes are a bit too round in the front. I printed them with 15-20% infill (trees and shoes). If you read this in December, Happy Christmas! &nbsp;I borrowed the shoes from @FatherLicorice and his cute little ghosts. &nbsp;