steve.saunders56

Matdanck121

A Lighthouse tea candle holder. The top part can hold a battery powered tea candle with a diam. of 40mm and you can also drop a battery tea candle down into bottom part of lighthouse. It prints in 4 pieces and can fit on 1 plate the fence part just slides into holes on the middle part (push down evenly, don't be too rough) and the middle section and the roof have grooves so that they rest securely on top of the other parts.&nbsp;I put 2 print profiles 1 for single color print and 1 for 2 colors with AMS.

Lighthouse Tea Candle Holder

Lighthouses

techam

<h2>Summary</h2>This adapter allows you to mount two 7mm slim 2.5&#34; HDD or SSD drives in a 3.5&#34; Slot.The adapter has mounting points on the top and sides with the same spacing as 3.5&#34; drives have. Also there are holes with 30mm spacing as floppy disk drives use them.The holes should fit for M3 Screws, to be screwed directly into the plastic.For the 2.5&#34; Drives you need four M3x12mm Allen screws.&nbsp;Have fun.

3.5" HDD adapter for two 2.5" HDD 

HDD SDD Adapters

JohnTrottoCreations

This is a jig for a fiber laser, to hold a variety of sized tumbler, cups and glasses into place, and level them.Holes are 50mm spacing (fits most standard fiber laser beds)

Fiber Laser Tumbler Jig

Fiber Laser

BillyMayonaiz

Hello!&nbsp;The 3mf of this benchy can be imported to either Bambu Studio or Orca Slicer (I am using Orca Slicer), and can be used as potentially optimal profiles for TPU printing, specifically Overture (as it is a low entry price for TPU). As a breakdown:<ul><li>Filament Profile: Overture TPU - Black: This config is for the filament. The print shown above is done with recently opened TPU from Overture (like the morning before posting this), so if you get different results with blobs/underextruding, dry your filament.</li><li>Print Profile: 0.20mm Standard - TPU: This config is for all the process settings. Basically, the main thing is that the printer will be printing slow. It needs to to be able to print TPU reliably.</li></ul>This print was made with only the part cooling fan. If printing with a P1S, just make sure to open either your top cover or the front door to allow for ventilation. I also am running stock everything else, so whatever machine you got out of the box, this profile should be close enough to work.&nbsp;Hope this works!&nbsp;*Obligatory benchy included for print model

P1S/P1P Overture TPU Config File

Configurations

Sakul

📐Corner Clamp for Woodworking🪚 I needed some corner clamps for a woodworking project that I&#39;m currently working on.Most of the corner clamps I found still needed a traditional one-hand clamp for tightening, so I designed my own that are fully 3D printed and don&#39;t need additional parts. I increased the wall count a little bit in the print profile to ensure that the parts are strong enough. The thread in the rail may look a bit rough after printing, but it worked like a charm without post-processing.  You may also like: <figure class="table" style="width: 98.39%"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td><figure class="image"><a href="https://makerworld.com/en/models/484385#profileId-396742" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000176297/design/2024-06-04_8706199eaa5e9.jpg"></a><figcaption>🍦Pop &amp; Catch Toys Ice Cream Cone🍦</figcaption></figure></td><td><figure class="image"><a href="https://makerworld.com/en/models/447981#profileId-354736" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000176297/design/2024-05-01_1338867632a42.jpg"></a><figcaption>🐷Minecraft Animal Farm Pack🐮</figcaption></figure></td></tr></tbody></table></figure>

Corner Clamp for Woodworking

Clamps

K2_Kevin

<h3>Tired of jumping and jamming spools in your AMS? Weight them down with ease and style. A must have when your spool is running light on filament. </h3><h3>NOTE: More infill, more weight. Profiles claiming to be “fast”, will also weight less, defeating the whole purpose!</h3>💚 Don&#39;t forget to Follow! Thank you so much for your Downloads, Like and BOOSTS!&nbsp;Spool Weights hold 8 AA Batteries (new or used), or get creative! Fill them with pennies, steal washers, fishing weights/sinkers, ball bearings, concrete, you name it.<ul><li>Two color Print Profile for a nice “Faceplant” Bambu Logo</li><li>Single color for fast no logo weights.</li><li>NEW Battery Separator - stops batteries from moving and adds more weight</li></ul><h2>FITS SPOOLS - 55mm hole:</h2><ul><li>Bambu Lab Spools</li><li>Polymaker Cardboard Spools</li><li>Hatchbox</li><li>Creality (Cardboard)</li><li>Amolin</li><li>and more…</li></ul>UPDATES:01/23 NEW Battery Separator - Stops batteries from moving.  ProtoPasta Spool Weight Profile available!&nbsp;REQUESTS: If you have a request for specific spool. Send me a message, include the measurements and Id be happy to design/add.<h3> </h3><h3> </h3><h3>Check out a few other helpful accessories for smooth operation.</h3><a target="_blank" href="https://makerworld.com/en/models/152636#profileId-166676" rel="nofollow noopener">Hotend PTFE Guide</a><a target="_blank" href="https://makerworld.com/en/models/152636#profileId-166676" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000081622/design/2024-04-24_752be73a02f9.png"></a><a target="_blank" href="https://makerworld.com/en/models/52179#profileId-53992" rel="nofollow noopener">AMS Buffer Block</a><a target="_blank" href="https://makerworld.com/en/models/52179#profileId-53992" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000081622/design/2024-04-01_94be6ea3d1f74.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/51579#profileId-105225" rel="nofollow noopener">AMS Support Button</a><a target="_blank" href="https://makerworld.com/en/models/51579#profileId-105225" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000081622/design/2024-04-01_e1bb7a4ccb38c8.png"></a>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/93011#profileId-99425" rel="nofollow noopener">PTFE Coupler Support</a><a target="_blank" href="https://makerworld.com/en/models/93011#profileId-99425" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000081622/design/2024-04-01_429aa1362b6ba8.png"></a>&nbsp;&nbsp;

Spool Weight for Bambu AMS

AMS Spool Weight

GekoPrime

I tried another spool winder but found it finicky and delicate.I designed this winder from scratch to be simple and robust, using the same self reversing leadscrew mechanism found on industrial cable windersWhy pick this model:<ul><li>Prints on a single build plate</li><li>Doesn't require heat set inserts or exotic hardware</li><li>Fusion and STEP files are available, remixes welcomed</li><li>Generous clearances, simple mechanisms</li><li>Designed to be a tool, not a project</li></ul>Print time:<ul><li>~500 grams of filament</li><li>~22 hours on Bambu Lab X1</li><li>~5 minute assembly</li><li>~2 minute spool transfer</li></ul>Hardware requirements:<ul><li><a target="_blank" href="https://www.amazon.com/s?k=608+bearings" rel="nofollow noopener">14x 608 skate bearings</a></li><li>A scrap of PTFE tubing</li><li>An electric screwdriver or drill with <a target="_blank" href="https://www.homedepot.com/p/DEWALT-MAXFIT-3-5-in-2-Philips-Bit-DWA3PH2MF/309474882" rel="nofollow noopener">a bit cut from ¼ inch hex stock</a> (most <a target="_blank" href="https://www.amazon.com/ITP1201-SCRWDRVNG-2IN-1-IMPAC/dp/B01LZZ7AOS/" rel="nofollow noopener">cheap quick change Philips bits</a> in the US fit this requirement)</li></ul>Print settings:<ul><li>Any. I used "0.16mm Optimal" in BambuSlicer with 5% adaptive cubic infill </li><li>Use 100% concentric infill for spindle_male_driven</li><li>Try the STLs if you have a problem with the 3mf files. I’ve added (xN) to each file name so you know how many to print</li></ul>Materials:<ul><li>Any. I used Polyterra and iiidmax PLA+</li><li>Use TPU for tpu_consumable_wiper_blade. I used Priline 98a. The wiper blades aren’t 100% required but they help keep the windings nice and tight</li></ul>Assembly and usage:<ul><li><a target="_blank" href="https://youtu.be/DxgkYDrRK-U" rel="nofollow noopener">Demo video</a></li><li><a target="_blank" href="https://youtu.be/-Hy69YwRLBw" rel="nofollow noopener">Assembly video</a></li><li>The side that says “Pastamatic" needs to face outwards, away from the spool</li><li>The filament needs to come in under the target spool, like this: O____O<ul><li>[not like this: O‾”‾”‾”O]</li></ul></li><li>The drill/driver needs to run clockwise, as though you're screwing something in</li><li>Accelerate slowly until the winder gets started</li></ul>Change log<ul><li>2023-05-28<ul><li>Initial release</li></ul></li><li>2023-05-29<ul><li>Fix a minor export glitch in "leadscrew_tooth"</li><li>Increase the number of “pin_short” instances in the 3mf from 6x to 8x</li></ul></li><li>2023-05-30<ul><li>Add a second prearranged 3mf with two plates to avoid overlap warnings</li><li>Disable autogenerated brims for the single plate 3mf </li><li>Add STLs for people who have trouble with the 3mf</li></ul></li><li>2023-06-03<ul><li>Add a ring to passive_target_cradle to prevent the far end of the target spool lifting if a user lets the the drill hang loose</li><li>Add a pin to driven_target_cradle prevent the leadscrew popping out</li><li>Fix a minor clearance issue where a dovetail didn't fit quite right</li></ul></li><li>2023-09-30<ul><li>Reduce chamfer on the crossbars to prevent them falling over when bed adhesion is poor</li><li>Add some holes to the crossbars to make them easier to screw down</li><li>Add some popular acessories to the all-in-one .3mf</li><li>Add a printable spool to the all-in-one .3mf</li></ul></li></ul>How to contribute:<ul><li>Post your make, it keeps me motivated to improve the model when I see people using it!</li><li>Post your feedback, idea or remix in the comments!</li><li>There are a few improvements and accessories in development as remixes, check those out if you‘re up for the alpha/beta tester experience<ul><li><a target="_blank" href="https://www.printables.com/model/498743-pastamatic-37-mm-motor-mount" rel="nofollow noopener">Adapter for 37mm gear motor</a></li><li><a target="_blank" href="https://www.printables.com/model/556405-pastamatic-filament-spool-winder-modifications-bra" rel="nofollow noopener">Source spool holder for 5 KG spools</a></li></ul></li></ul>Credits:<ul><li><a target="_blank" href="https://www.printables.com/@MiklosKiszely_486882" rel="nofollow noopener">@MiklosKiszely_486882</a> for the original idea</li><li><a target="_blank" href="https://www.printables.com/@PsychoShaft_33891" rel="nofollow noopener">@Psycho Shaft</a> for the drag/tensioner concept</li><li><a target="_blank" href="https://www.youtube.com/@thang010146" rel="nofollow noopener">thang010146</a> for YouTube videos of mechanical mechanisms, particularly the self reversing leadscrew for a level cable winder</li></ul>&nbsp;

Pastamatic  Filament Spool Winder for Bambu X1C/P1P AMS (level winder with self reversing leadscrew)

Filament Winder

TotalChaos

Build Plate Guide For your X1 & P1 Series Printers. I have created my own version of a build plate guide, It's been in use for over a month & is working fantastic. 1. Print in your chosen material, best in PETG 2. Remove supports3. Clip onto the left back corner of the build plate ( should be a completely flush finish )4. enjoy easy plate alignment

Build Plate Guide - The Fuss Free Way For Build Plate Alignment 

Build Plate

SpectreGadget

FYI, I have created several other versions.  Print the R4 profile for the new AMS<ul><li><a target="_blank" href="https://makerworld.com/en/models/30631#profileId-112717" rel="nofollow noopener">AMS Glass Separation LED Riser for COB LEDs</a></li><li><a target="_blank" href="https://makerworld.com/en/models/190027#profileId-209722" rel="nofollow noopener">Glass Separation LED Riser (no AMS)</a></li><li><a target="_blank" href="https://makerworld.com/en/models/190665#profileId-210450" rel="nofollow noopener">Glass Separation LED RIser for COB LEDs (no AMS)</a></li></ul>&nbsp;*** UPDATE 6/25/24 - I&#39;ve recently ordered and received a new NEON-type LED strip that can replace the original I had used.  This one comes with an optional inline switch with remote capability, which is a nice addition.  Without that, it is quite bright.  You can find it on Amazon at <a target="_blank" href="https://www.amazon.com/dp/B0CVW36X26" rel="nofollow noopener">B0CVW36X26</a>.   It&#39;s a ‘snug’ fit with the R4 profile, so will likely not work with the original “0.2mm layer, 3 walls, 15% infill” profile.&nbsp;*** UPDATE 12/18/23 - <a target="_blank" href="https://makerworld.com/en/models/14025#profileId-104675" rel="nofollow noopener">R4 profile</a> now live with these updates:<ul><li>Supports NEW AMS design and should support all AMS designs</li><li>Wider channel for NEON LED strips since the newer ones are a bit wider. Narrower strips may need 3M tape to secure</li><li>Slightly decreased bottom perimeter improve fit for some filaments/settings that may cause some &#39;elephant foot&#39; at the base</li><li>Added small lip at front to keep glass in place for more energetic printer movement</li><li>Increased gap between parts by 0.05mm to make assembly easier for some materials that are less exacting</li><li>Added numbers on the bottom to help with aligning for assembly</li><li>Added Holder Clips to the R4 profile, four on each of the two plates. Brim is enabled for the clips.</li></ul>I originally started to make a riser with vents for when I print PLA, but decided to go a different route. I wanted to meet these requirements:<ul><li>Move the AMS off the top glass</li><li>Be able to vent the top, but keep the glass with the printer</li><li>Easily remove the glass to get into the printer, without moving the AMS</li><li>Add additional LED lights in the form of “neon” type LED strip</li><li>Keep as minimal / minimalistic as possible, with a low profile and not take a lot of filament, &lt;500g</li><li>Keep it all together, avoiding wall mounting or sitting to the side</li><li>No supports required</li></ul>This riser has a second shelf above to hold the glass top, allowing venting, but keeping the top with the printer.The gap between the parts is 0.1mm for the original profile so it&#39;s meant to be a tight fit that stays together. The R4 profile has slightly larger gaps at 0.15mm.&nbsp;If you only print PLA, then printing in PLA will be ok. Best to print in either PETG, ASA, or ABS, especially if your chamber temps get to 50+ as then you are getting close to the glass transition temp of PLA and could cause problems.&nbsp;“Holder Clip.stl” is a clip that can be used to hold the LED power cord along the back before exiting the riser. “Holder Clip.3mf” has 6 of them.&nbsp;The original light strip I used was the vimeepro 5V USB LED Neon Lights Strip 3.3ft neon Rope Lights Flexible Waterproof Neon LED Strip from Amazon: <a target="_blank" href="https://www.amazon.com/gp/product/B0BB724ZS9" rel="nofollow noopener">B0BB724ZS9</a>. I like these lights as they provide good additional light without washing things out. If those are not available, you could use the 6&#39; one and cut it short as needed. <a target="_blank" href="https://amazon.com/gp/product/B0B73VGSCL" rel="nofollow noopener">B0B73VGSCL</a>. Availability of these seems to go in and out of stock. I would think that similar “NEON”-type LED strips should work. Another option provided by <a target="_blank" href="https://www.printables.com/@moebis" rel="nofollow noopener">@moebis</a> is <a target="_blank" href="https://share.temu.com/u5L2QMYplFA" rel="nofollow noopener">https://share.temu.com/u5L2QMYplFA</a>&nbsp;

AMS Glass Separation LED RIser

AMS Riser

SPStudio

<h4>I update, revise and improve my design for my fixes very often. Please only use my Print Profile (Labelled as Designer or SPStudio) to ensure this fix is updated & work well. Profile with Non-Designer tags may be of poor functionality or non updated model.</h4>Click on Like if this model helped you in some way. It is very important and will help increase the exposure of this design to more people who might need it. Cheers!&nbsp;&nbsp;<blockquote>AnnouncementNew and Improved V2 Versions for the Ams Buffer Fix <a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">Before Buffer</a> and <a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">After Buffer</a> have just been released. Do check them out in my profile to see what are the improvement. Thank you for your continuous support.<figure class="image image_resized" style="width:33.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2023-12-21_db335e9276f41.jpg"></figure></blockquote><h2> </h2><blockquote>Update 13 Nov 04:45am SGT: I have just released new fixes to supplement the existing fixes. I would recommend you to install these fixes to help further improve the Ams and Printer system. You can get them in my Profile. &nbsp;Ams Buffer Ptfe Right Guide Mount Fix & Extruder Ams Filament Pull Back Fix & The Smooth 4 Way Splitter <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2023-11-21_dcf79fcacc4fa.png"></figure></blockquote>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/56906#profileId-58572" rel="nofollow noopener">A completely brand new design update For Ams Filament Pull Back Error have been launched. It's well designed & precisely measured compared to this V1. Get it by clicking here or search for Ams Filament Pull Back Fix V2 Upgraded. </a>&nbsp;Important Note: This new design is used to replace this older version. You can choose to use any of the version or try 1 then if it doesn't work very well then try the other one, but please do not use both new and old model together. It will make things worse.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2023-11-04_9ffdaf00db085.png"></figure>&nbsp;&nbsp;If you prefer to try out the Og Version one, Please read on.This is suitable for all Bambu Printer series.&nbsp;&nbsp;<blockquote>Quick update: New installation video updated. For those who tried this fix and it didn't work or work well, please check & ensure the fix is not pressing on any of the Ams wiring harness when you reassembled the Ams there are 3 gaps in total and its designed in such a way that sufficient space to allow all wiring cables to pass underneath the gaps and not be press / pinched on the fix after reassembly.</blockquote><h2> </h2><h2>Introduction</h2>Failed to pull back filament error can be caused by multiple different variables & factors. This is a part of an series of Ams fixes that i have designed which can complement each other when used together. I do suggest you install all my fixes together for the 0ptimal effect to help your filament travel properly across the entire system which in turn can help improve, reduce or remove any potential Ams errors.&nbsp;I have grouped all fixes into their respective Collection for ease of searching what to install.&nbsp;V2 Collection are improvements done on the shortcoming of V1 Collection. Feel free to try V2 Collection and if it doesn't work properly then you can try the V1 Collection. You can easily find each of the Collection by clicking on the Collections tab on my profile.&nbsp;Unfortunately there isn't a single fix that can 100% work for everyone. What works for others, may not work for you but my fixes is definately a great place to start and have worked for majority of the users. My fixes are precisely measured then modelled. A Proper Fix would have the highest chance to reduce or solve the error.&nbsp;<figure class="image image_resized" style="width:81.05%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-09_cd9c426e40212.jpg"></figure><h2> </h2><h2>If you are too bored to read the entire lengthy write up explaining the need for this fix, here is the TL:DR.</h2>What is this? Ams Fix Failed To Pull Back Filament Retraction Error will correct the internal Ptfe tubes angle inside the Ams and maintain a nearly straight Ptfe feeding into the Ams motor to reduce friction and pressure.&nbsp;Koen Burkink's <a target="_blank" href="https://www.facebook.com/groups/bambulabofficialusers/posts/1075261490084536/?comment_id=1075391176738234&notif_id=1697488005459532&notif_t=group_comment_follow" rel="nofollow noopener">post</a> / founding of the possible cause for Slot 3 (and possibly 2) Ptfe tube not a straight enough feed to the filament hub inside the Ams and causing failure in pulling the filament out. So i have did some measurement and i realised that all 4 Ptfe tube in the Ams bend at certain degree and not 100% straight into the feeder thus i have made this simple but very effective solution. &nbsp;&nbsp;Who needs this fix? 1) Constantly having errors like Failed To Pull Out Filament and similar related2) The Ams motor sounds like struggling when move filament in and out of the Ams to the Extruder, like a lot of friction when moving.3) Ams cannot load or unloading properly. (Not including Spool being too light or a break of filament in the Ams)4) Having a constant struggle on any of your Ams slots, people complained about Slot 2 and 3 but this fix is designed to fix all of 4 slots for Failed To Retract / Pull Out Filament Error.&nbsp;&nbsp;Have this fix been tested?Yes on 1 X1C, 1 P1P and 2 P1S about 67300 retractions with 0 error so far. Many other users have tested and most feedbacks have been really positive. &nbsp;&nbsp;Why use this fix?This is ez to print but yet its measurement is very precise. I have taken measurements down to millimeters in degree to confirmed the proper angle to move the internal Ptfe to allow filament to pass through smoothly and then printed multiples models to ensure that my fix works by properly aligning the internal Ptfe tube to reduce and possibility even eliminating the dreadful Failed To Pull Out Filament Error or similar related problems. &nbsp;The angle and Accuracy of the hole that the Ptfe Pass through is very precisely measured, the design is also well supported and made in such a way that it will not move inside the Ams while the filament move through it. &nbsp;If a fix is “Free hanging without support” likely wont be a permanent solution as it will allow the Ptfe to move during printing, which totally goes against the purpose of this fix of holding the Ptfe in place. &nbsp;&nbsp;<h2>Installation Video</h2><figure class="media"><div data-oembed-url="https://youtu.be/Wl5Kq3Ndhmc"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/Wl5Kq3Ndhmc" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;<h2>Important Notes:</h2>&nbsp;NOTE 1: The Ptfe Tube is supposed to be tight and snug for the proper angle accuracy. Plz make sure you installed it correctly as per the video instruction.&nbsp;NOTE 2: Does not fit Hydra Ams&nbsp;Note 3: Do note that the orientation during install should be as per video and images. if your Ptfe tube is bent at a different angle it means you are installing it wrongly.&nbsp;Note 4: You are required to properly assembled the Ams including the 2 screws that you unscrewed during the disassembly as this model require everything to be tight and snug for it to work properly.&nbsp;&nbsp;&nbsp;<h2>What Mod / Fixes / Enhancement do i offer?</h2>Please don't download the wrong one. Only those in the photos below is designed by me who painstakingly took a lot of time to measure carefully and design just to get it working. #SupportOriginal Love you guys for all the support so far!&nbsp;- <a target="_blank" href="https://makerworld.com/en/models/47982" rel="nofollow noopener">Ams FIX Failed To Retract Filament Error (a preventive measure and solve the bay 2 and 3 error and prevent bay 1 and 4 to have any possibility of having an error due to tension and friction)</a> (Updated design on the 2nd photo below, try 1 then if it doesn't works properly for you then install the other one.)&nbsp;<figure class="image image_resized" style="width:74.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_2e40f9b49d622.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/56906" rel="nofollow noopener">(BRAND NEW) Ams Filament Pull Back Fix V2 Upgraded - Completely New Design Upgrade For Ams Filament Pull Back ERROR! Precisely Measured</a>&nbsp;<figure class="image image_resized" style="width:75.86%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_9c729f1a3501a.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/52782" rel="nofollow noopener">- Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:75.68%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_14c8811c47696.webp"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/101046" rel="nofollow noopener">- V2 Ams Buffer Fix For Failed To Pull Back Filament Error (reduce wear on the external Ptfe tube and allow the most smooth, least friction angle to go into the Ams buffer thus reducing the possibility of an error popping up)</a>&nbsp;<figure class="image image_resized" style="width:76.45%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_6194006084695.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/53037" rel="nofollow noopener">- Ams Fix - Stack the Ams on tp (Using a carefully measured holder to hold the Ptfe in a curved angle that will allow filament to go through with the least possible amount of friction when the Ams is stacked on tp of the printer)</a>&nbsp;<figure class="image image_resized" style="width:77.35%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_e6ff2df6c7873.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/58543" rel="nofollow noopener">- Ams Buffer Ptfe Right Guide Mount Fix will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder.</a>&nbsp;<figure class="image image_resized" style="width:78.46%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_f95cf24ce5c9e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/85989" rel="nofollow noopener">- V2 Ams Buffer Right Ptfe Guide Mount - The Fix For Failed To Pull Back Filament a newly improved fix designed to replaced the V1 This will correct and maintain a nearly 100% straight line when the Ptfe tube exit the Ams buffer to move into the printer extruder. ez Installation. No screws needed!</a>&nbsp;<figure class="image image_resized" style="width:79.5%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_6ddf689393292.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/63021" rel="nofollow noopener">- Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:82.04%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_4c9e59fa5529e.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/103987" rel="nofollow noopener">- V2 Extruder Ams Filament Pull Back Fix will correct and maintain a nearly 100% straight line to move the filament in and out of the extruder. This will also reducing wear on the Ptfe tube. Its design allow the filament to travel in the most smooth, least amount of friction and pressure for the proper angle to go into and exit the extruder thus greatly reducing the possibility of an Failed To Retract Filament error or similar errors from popping up.</a>&nbsp;<figure class="image image_resized" style="width:81.99%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2024-01-10_69d2ccb8ac279.jpg"></figure>&nbsp;<a target="_blank" href="https://makerworld.com/en/models/67779" rel="nofollow noopener">- The Smooth 4 Way Splitter. Look No Further. Combined with Ams Hub Lite together with this small attachment, you will have the Smooth 4 Way Splitter.</a>&nbsp;<figure class="image image_resized" style="width:83.64%;"><img src="https://makerworld.bblmw.com/makerworld/draft/393378/2023-11-19_96f9eed020e9b.gif"></figure>&nbsp;