srumble89

Bedlam Threadz

This is a Hueforge filament painting of Naruto using only 4 basic colors. The frame for all of my, and probably the vast majority of 200x200 prints, is <a target="_blank" href="https://makerworld.com/en/models/56304#profileId-57896" rel="nofollow noopener">HERE</a>.*&nbsp;This is a 4 color print that can easily be done by people with or without AMS units. If you have an A1 mini or any other printer with a bed smaller than the capacity to print 200x200 you can use the slicer to scale the model in the correct profile for your multi color setup just make sure NOT TO SCALE THE Z dimension. If you substitute filaments results will vary. This model is for personal use only.*&nbsp;IMPORTANT: READ BEFORE PRINTING*&nbsp;I have uploaded two 3MF profiles. One for people with an AMS and one for people with NO AMS.*&nbsp;To print with 1 AMS units all you need to do is load the colors in order and print.*&nbsp;To print with NO AMS unit you just need to do manual filaments swaps every color. The 3MF is set to pause at the correct layer heights. At each pause load the next filament color in order by following your unload/load procedure for your particular printer, then hit resume. Repeat until complete. This will be once per color over the entire painting. You have a decent amount of time between swaps.*&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. There are some recommended speed changes in my 3MF files and a layer height modifier to print the first 0.64 mm @ 0.16 mm layer height to speed up the print as there is no blending on those layers. If you don't use my profile set your layer height modifier after you have set your color swaps/pauses as it changes the total amount of layers once sliced or use the layer height value instead that number will not change ex. At layer #12 (1.04mm) swap to Blue Gray *&nbsp;Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3.1 PLA BambuLab Basic Silver Transmission Distance: 0.5 PLA BambuLab Basic Jade White Transmission Distance: 5*Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Blue Gray At layer #20 (1.68mm) swap to Silver At layer #23 (1.92mm) swap to Jade White for the rest.

Naruto - Filament Painting - 4 Colors

Anime

Print4Gods

This remix of the AMS button cover added back the angled part to make it easier to push, still accepts the PTFE tube to protect against wear. Smooth around the side. Adding a Bambu lab logo.THX @<a target="_blank" href="https://www.printables.com/de/@MaverickNg" rel="nofollow noopener">Maverick Ng</a>I've improved the print bed adhesion and the deep for the Logo

Bambu lab AMS Feeder Button remix

Useful

SmileyPrinter

Magnetic fidget sword as seen on TikTok! One side of the sword attracts while one side repels its scabbard. While the magnets are repelling it creates a springy sensation that is great for fidgeting. If you push the sword down and quickly release you can make the sword go flying!While the magnets are attracting it creates a satisfying click noise as it fully closes.Let me know what sizes you would like!Uses 12 magnets, 3 for each half of the sheath and 3 for each side of the sword blade.Print 2x of the blade hilt and 2x of the sheath. More magnet sizes to come! Design files are included so you can decorate the parts as you wish to fit your personality and magnet size.Print on the flat side, no supports required. Use super glue to glue the hilts to the sword blade and the two halves of the sheath together AFTER GLUING THE MAGNETS IN. (Once the two halves of the sheath have been glued it will be basically impossible to get the magnets in). Rock model from: https://www.myminifactory.com/object/3d-print-stone-218700#google_vignette<h4>MAGNET ORIENTATION </h4>Orientation is crucial to get the right effect!Glue the magnets with north facing outwards on one of the sheaths and on the other glue the magnets with south facing out. For the sword repeat the process so one side of the sword has magnets with north facing outwards and the other side has south facing outside.

Anime

Useful

Fidgets