solarreader

kiong

有2条酒红-雷龙鱼-苗子，想用小米鱼缸养，但是会打架，所以用隔板分开饲养，网上有卖，但是自己有3d打印机，还是自己画一个吧。需要15mm的蘑菇头吸盘8个。&nbsp;2024年5月7日修改了尺寸，老版本始尺寸宽度短了10mm，现在正合适。<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446026/design/2024-04-28_5838e5b5b46f3.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446026/design/2024-04-28_05ae67a9035d7.jpg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446026/design/2024-05-07_f802068f16dd9.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446026/design/2024-05-07_8604ea4f592bd.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000446026/design/2024-05-07_ee214d204f3d8.jpg"></figure>

小米鱼缸隔板

鱼缸

R. N. Lauritsen

this is my first draft on a Mac Studio Raspberry pi case, it is a 1:1 (or as close as i could get with pixel measurements).&nbsp;>> this is just a draft model, im planing on changing a lot about it in the futur to make it better <<this case should fit more or less every raspberry pi model b that has mounting holes spaced 58x49, and there is a large opening in the back, for you can have a usb adapter hanging out, so you still can connect your peripherals.the case is held together with m3 screws, the same with the raspberry pi mount, and 2 m3 nuts for the outer case to be clamped onto the base.&nbsp;there are 2 difrent types, one with the same sized holes (well, as close as i could get to the real deal XD) and another that is more print friendly, but i doubt that there wont be any cleaning up afterwards with that many holes.&nbsp;the hole diameters on the realistic one is 1,6mm with 0,4mm in between, and on the print friendly it is 3mm with 2mm in between.there is a 9,5mm hole in the front (for now) to fit an led, i know it needs to be smaller (D=0.95-1.0) but i forgot to change it, after i uploaded the model here on prureprinters, so thats definitely one thing that going to be changed.<ul><li>added 2 test prints, so you can test print and see, if the exhaust holes can be printed on your printer.</li></ul>&nbsp;(i do not claim to own or anything similar, aboutany designs, names or any of Apples inc. intellectual properties , all copyrights belongs to Apple inc. )

MacPi Studio

电子用品

ATTV85

Dragon spacecraft is capable of carrying up to 7 passengers to and from Earth orbit, and beyond.

SpaceX Dragon capsule

航空航天模型

Josh-3D

<h3>Model</h3>A phone stand to go along with the<a target="_blank" href="https://makerworld.com/en/models/189326#profileId-208776" rel="nofollow noopener"> Headphone stand I made!</a> A few people had suggested this, so figured why not?&nbsp;Model is featured in Bambu PLA Matte Charcoal, and Bambu Iridium Gold Metallic for the main print. For the second print, it is featured in Bambu Charcoal and Polymaker Muted White.&nbsp;(Keep scrolling past the updates for required hardware and assembly instructions!) &nbsp;[Update 1]I added a step file for the main phone holder, to the raw files, to make it easier to adjust for other sized phones/devices that don't fit into the holder as it is now! If you modify the phone holder portion, please share! You can include the modified holder as a new print profile (No need to donate points, you did the tweak!), or if you'd prefer, you can just post it as it's own object. Just send me a link, and I'll add it in the description here to help make sure people find it.<figure class="image image_resized" style="width:30.22%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-26_265822ae21a7.png"></figure>[Update 2]I added a print profile that provides a variation on the holder part, adding in holes on the bottom to better allow for a speakers/mic to work without interference, as a user had requested one. <figure class="image image_resized" style="width:30.19%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_a1b94dad29915.png"></figure>[Community Spotlight]Thanks to <a target="_blank" href="https://makerworld.com/en/u/1489256341" rel="nofollow noopener">o.0jack</a> for the a1 mini profile<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_ada1894ffcacd.png"></figure><a target="_blank" href="https://makerworld.com/en/u/4171661601" rel="nofollow noopener">rakibby </a>has provided a version of the holder that's a little deeper (17mm!) so if you've got a thicker phone, check out rakibby's print profile! <figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-29_1fd7a9c8d8b06.png"></figure><a target="_blank" href="https://makerworld.com/en/u/11128021" rel="nofollow noopener">KYZ Design</a> has made us a <a target="_blank" href="https://makerworld.com/en/models/217683#profileId-236629" rel="nofollow noopener">TPU Sock</a> to help keep the stand in place. They look great and match the style! <figure class="image image_resized" style="width:29.75%;"><a href="https://makerworld.com/en/models/217683#profileId-236629" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-03-01_7d2974c2e301d.png"></a></figure>&nbsp;[Tools & Assembly]Like the Headphone stand, the cell phone stand is pretty easy. You'll need the following hardware and tools.I designed this to use M3 socket cap screws.Hardware Needed:M3x12 - 4 (used for the feet)M3x25 - 3 (Used to connect the swing arm to the stand, and the phone holder to the swing arm)M3x30 - 1 (Used for the knob for the swing arm)M3xNuts x 9 (The knob makes use of two nuts!)Tools Needed:Hex DriverDrill bit for clearing holes&nbsp;Start by drilling out the holes in the feet and knob. These holes were partially blocked to get a cleaner print. All the other holes should be sized that a M3 screw can fit through without being too tight, but things like variation in filament properties might make the holes tight, so if you can't freely push a screw through the holes in the frame, clear them out with an appropriately sized drill too.<figure class="image image_resized" style="width:49.94%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_dee28ae5b0db5.png"></figure>Next, Prepare the knob! We'll feed a M3x30 screw through the hole and through a nut that'll be embedded on the other side of the knob. Tighten it down!<figure class="image image_resized" style="width:61.51%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_27826e74eb785.png"></figure>Now we'll assemble the main frame! There's embedded slots for all of the M3 nuts, so go ahead and prepare by putting all the nuts in place. Next, we'll install the feet, as once the holder and swing arm are on, it can obstruct access to the screws for the front feet. Use M3x12 screws for the feet! For the swing arm, attach the two phone holder sides using M3x25 screws. Attach the arm to the base using a M3x25mm screw, but make sure not to over tighten it as we don't want the hing to be too stiff! Lastly, install the knob through the guide and swing arm and tighten it down!<figure class="image image_resized" style="width:73.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/684666/2024-02-24_9f8ad10fc9a09.png"></figure>-------If you like my work, consider showing your love by <a target="_blank" href="https://www.buymeacoffee.com/josh3d" rel="nofollow noopener">Buying me a coffee</a>. Additionally, if you're looking to sell prints of my design, please check out my <a target="_blank" href="https://www.patreon.com/josh3d/" rel="nofollow noopener">Patreon</a> page for more information. on.

Phone Stand - Industrial 

生活用具

达文西FPV

中国古代乐器——洞箫G调适合入门The ancient Chinese musical instrument, the Dong Xiao in G key, is suitable for beginners

中国古代乐器——洞箫G调Ancient Chinese musical instrument - Flute Dong Xiao G key

乐器

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014265/design/2023-09-19_8d08d601f168.png"></figure>Let&#39;s start a marble race with friends! This marble run features a series of elements including elevator, starting line, randomized dividers, elevated track, large funnel, spiral, and loop section. It allows competition of multiple marbles, with each segment introducing an element of unpredictability. The excitement continues all the way to the end!&nbsp;Recommended filaments: Bambu PLA series, PLA Basic is recomended for more smooth track<a target="_blank" href="https://store.bambulab.com/collections/bambu-lab-3d-printer-filament?gf_60645=279355719795" rel="nofollow noopener">https://store.bambulab.com/collections/bambu-lab-3d-printer-filament</a>Hardware Kit: Marble Run Components Kit-003<a target="_blank" href="http://store.bambulab.com/products/marble-run-components-kit-003" rel="nofollow noopener">http://store.bambulab.com/products/marble-run-components-kit-003</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the video tutorial step by step to print and assemble your build. <figure class="media"><div data-oembed-url="https://youtu.be/8_Su9jdzgNA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/8_Su9jdzgNA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Marble Run 003

官方模型

Ian Smalley - hueforge

Filament painted print made using HueForge - Filament swaps ONLY, no mmu/ams required&nbsp;3 Colour ‘Filament Painting’ model - Op-Art Zebra Portrait, made using Bambu filaments.&nbsp;(I recommend the following speed settings for the bambu with 0.04 layers, inner walls, outer walls and gap infill - 200mm/s, sparse infill, internal solid infill and top surface - 150mm/s)&nbsp;Leave The Aux fan off on the bambu as it causes more harm than good on these larger prints&nbsp;Print at 100% infill with a layer height of 0.04mm with a base layer of 0.24mmFilaments Used: PLA Bambu PLA Matte Charcoal Transmission Distance: 0.6 PLA Bambu PLA Tough Cream White Transmission Distance: 10 PLA Bambu PLA Matte Ivory White Transmission Distance: 4&nbsp;Swap Instructions: Start with Charcoal At layer #7 (0.48mm) swap to Cream White At layer #22 (1.08mm) swap to Ivory White for the rest. This is a filament blending model, I would recommend trying to match the td as close as possible if not using the exact filaments to get the best results.Use the exact numbers in your slicer to match up properly.Two different size models are supplied and designed to print with 0.4 nozzle **If Scaling the model make sure not to adjust the Z-Height of the model**&nbsp;ALL of Ian Smalley's designs are protected by Copyright Law. Downloading does not give you permission to use the files or physical prints for financial gain. If you want a commercial license to Legally sell prints from my designs, you will need a SELLER subscription.

Op-Art Zebra Portrait (Filament Painting)

艺术画

Filar3D

Eiffel tower model in 4 parts. Allows you to print bigger towers! No supports.

Eiffel Tower in Parts for bigger prints

建筑模型

Dinozzo28

Tool box with name tag space, and u can stag them.

Tool box with name tag space

储物盒

Nakozen

Fashionably late as always, so rev up those printers cause you got plenty more printing to do for the local guisers/trick-or-treaters! No character this year, but instead a wee stone Mausoleum surrounded by a few equally cute little gravestones. The baseplate is an optional 2nd sprue, so it can work just as well without, but I recommend printing both at least once! -----------------------------------------------Unlike my older kit cards there is only one tightness variant, which if you find is not loose enough, try setting outer walls to print first, I found this to be the magic ingredient for my Ender 3's. Included is a Frameless variant for those uninterested in the sprue card format. Make sure to print a few of the gravestone pairs! You can make it EVEN TIGHTER by increasing the Z-scale by 15%. ------------------------------------------------------------Print at 0.2mm layer height, there really is no benefit from printing at a higher resolution and it could affect the fit. No hanging loop on this one, but can add one if asked nicely enough ;) Having trouble getting the tolerances just right? Set Outer Walls to print first.Makes greatly appreciated, always glad to see them! Happy Printing!------------------------------------------------------------<h3>Interested in selling?</h3>All files are marked as non-commercial along with any remixes created from them, however licenses are available via Ko-Fi and Printables Clubs!If you are interested in selling physical prints of my models anywhere, be it online or offline, you can obtain a sales license when subscribed to Tier 3 of my Ko-Fi memberships, or Printables Clubs!

Spooky Mausoleum Kit Card

模型玩具

Julia Ebert

This is a big toy human figure that's inspired by a Lego minifigure. I spent a lot of time making this model from scratch to match the original design while making tweaks for tolerances, printability, and strength. While there were a number of minifigure models I found online, most were not designed for printing, which is a particular challenge for the leg, arm, and hand joints. I'm particularly proud of the universal clip I designed for these, which makes for easy assembly and stiff-enough joints to pose your figure.I designed the clips and tolerances for this model to be printed at 100% (10x original Lego scale), but people have previously had success printing my <a href="https://www.printables.com/model/78695-mega-lego-like-skeleton-101-scale" rel="nofollow">10x Lego-like skeleton</a> at smaller scales (eg, 50% or 5x Lego-scale).Now that I have a base model for a Lego-like figure, this opens up a host of options for specific Lego-like figures. If there's something particular you're interested in, leave a comment or send me a message! If you want to make your own modifications, I've included STEP files for all parts (just be sure to give credit for my original design).Fully assembled, this model stands 40 cm (~16 inches) tall. I printed mine with Hatchbox true blue PLA, Hatchbox true red PLA, and Prusament mango yellow PETG.<h4>Printing Instructions</h4>I've included 3MF files for all parts, and parts should import correctly oriented for printing.<ul><li>For PrusaSlicer 2.6+: you just need to load the project file. (This makes use of organic supports, for the legs, which are added with PrusaSlicer 2.6.)</li><li>For other slicers: I've included details about special instructions for all parts, so you should be able to replicate anything necessary for proper printing. Except where otherwise noted, I printed parts in PLA at 0.15mm layer height with 7% cubic infill and without supports.</li></ul>You will need to print:<ul><li><code>32x-connector-pins.3mf</code>: You should need 30 pins for assembly (or 26 if you print the solid head); this has 2 extra just in case. If you have trouble with bed adhesion, add a brim</li></ul><h5>Legs</h5><ul><li><code>legs.3mf</code>: Uses tree supports the top of the lower hole on the leg.</li><li><code>hips.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Body</h5><ul><li><code>arms.3mf</code>: These print with a small surface area on the bed (the wrists), so you might want to add a brim if you have trouble with bed adhesion.</li><li><code>body.3mf</code></li><li><code>2x-limb-clips.3mf</code>: This file contains two clips. You'll need to print one set of two in the arm/body color, and one set in the leg color. Important: I recommend printing this in PETG or ABS with 25% infill, because it will have to flex and PLA might snap.</li></ul><h5>Head & hands</h5><ul><li><code>2x-hands-wrists.3mf</code>: Requires supports on the underside of the wrist clip. Like the limb clips, I recommend printing with PETG (or similar) with 25% infill.</li><li>One of: (all require supports on the underside curve of the head)<ul><li><code>head-face-mmu.3mf</code>: Print the head & face as one part with some sort of multi-material printer (e.g., Prusa MMU or Bambu AMS). Use supports on the underside curve of the head.</li><li><code>split-head.3mf</code> and <code>face.3mf</code>: Print the head (with cutouts) in two pieces. Use pins and glue to connect the halves. Print the face separately and glue it in.</li><li><code>solid-head.3mf</code> and <code>face.3mf</code>: Print the head and face as separate prints. Use supports on the underside curve of the head. Then glue the face parts into the head.</li></ul></li></ul><h4>Assembly Instructions</h4>In addition to the printed parts, you will need cyanoacrylate glue (CA glue/superglue). <h5>Legs</h5><ol><li>Glue the pins into the top of the hip. Add glue to the holes and bottom surface of each of the hip pegs and attach. Important: The slope of each hip peg should be facing out to the sides. If the pins don't want to go together, check that you have this orientation right!</li><li>Use the same gluing approach to attach the limb clips to each side of the hips.</li><li>Gently but firmly press each leg onto the clips. It should snap into place. The hips are symmetric, so you can't put the legs on backwards. This requires a fair bit of force, but you shouldn't need a hammer. If it won't go on, slightly sand or file down the outer head of the limb clip (rather than the inside of the hole on the leg). Warning: The clips are not designed to come out once they're attached, so make sure you're ready.</li></ol><h5>Body</h5><ol><li>Glue the limb clips into each arm, like you did for the legs.</li><li>Glue the wrist onto the hand, with the pins. Because of the relative print orientations here, it's best to use a bit more glue here to make sure it stays on.</li><li>Press each wrist clip into the arm. (They're the same, so you can't put in the wrong hand.)</li><li>Press each arm clip into the body. The body is also symmetric, so you can't put the arms on backwards.</li></ol><h5>Head</h5>If you printed the separate head and face pieces, glue the face pieces into the head. You may need to file or sand some of the face pieces to fit, depending on how well the supports worked.<h4>License Note</h4>This model is marked as non-commercial because I don't want anyone (including myself) having Lego come after them with a lawyer. If you choose to sell prints of this model, you do so at your own risk!

Mega Lego-like Minifigure (10:1 scale)

人形玩具

TrocheHole

Fidget toy with a continuous &#39;click&#39; sound as you turn the dial.Print-in-Place! No supports! Have fun!  <figure class="table" style="width: 60%"><table style="background-color: #f5f5f5; border: 12px solid #f5f5f5"><tbody><tr><td style="border: 1px solid rgb(191, 191, 191); padding: 12px">[ Information ]Explore another fidget with wheels that doubles as a ratchet handle tool.&nbsp;<a target="_blank" href="https://makerworld.com/en/models/67213" rel="nofollow noopener">“Ratcheting Wheel Fidget”</a></td><td style="text-align: center; width: 30%"><a target="_blank" href="https://makerworld.com/en/models/67213" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000061194/design/2023-11-26_91d3b51b3c5ac.jpg"></a></td></tr></tbody></table></figure><h4> ────────── Update [ November 11, 2023 ]</h4>Ver. 1.1 ─ Fine-tuned adjustments and improvements have been made to each part for smoother turning.Ver. 1.2 ─ Enhanced the tactile click sensation.*Downloading the updated version is recommended for those who have downloaded the previous version. ──────────&nbsp;

Clicky Dial Fidget (Print-in-Place)

解压玩具

Amao Chan

<h2>Summary</h2>Bing-shen year of Formosan macaquesIn Chinese Zodiac, the year of the Monkey is in Feb. 8, 2016-Jan. 27, 2017. I designed Bing-shen year of Formosan macaques to celebrate the coming of a new year, and I hope to use this opportunity to draw attention for Formosan macaques in Taiwan.Formosan macaques, Macaca cyclopis, have been inhabiting in Mountain Shou-shan in Taiwan for many years. In recent years, tourists or local residents involving in feeding macaques have been raising a controversial issue. The foraging behavior of these macaques have been changing, and the macaques have becoming dependent upon handouts increasingly. In addition, the intense monkey-human conflict have been occurred. Some of macaques snatched the food from tourists, and some even invaded into local houses. In response to these threat, the tourists or local residents around villages started to attack macaques. Some of macaques were found being poisoned and attacked by human as their body appeared with wounds. The conflict around villages were intense against the species and its protected status. Scientists reported that 200 of the species were missing. These were the worst environment for Formosan macaques habitation. Scientists started working on conservation measures to reduce the conflict, they tried to provide a less disturbed habitats for macaques. They suggested the best way to resolve the conflict is to stop feeding, disturbing and touching macaques, so that macaques can stop dependent on human and start back to their habitats.&nbsp;As I designed Bing-shen year of Formosan macaques, I tried to left an imprint of time on their body. Thus, the foot of Bing-shen year of Formosan macaques are imprinted with Chinese words of Bing-shen.Chinese sexagenary cycle is a means of recording days or years. Most of people believe that the year of the Monkey will be back in the period of 12 years. In fact, the same year of the Monkey will be back in a circulation of 60 years, that is, it takes 60 years to wait for the next the year of Bing-shen of the Monkey. I designed 24 of nodes on macaques’ body, and each of nodes are rotatable and adjustable, which permits the macaques to show variable dynamics and expressions. Each of rotatable nodes are representing each of 24 solar terms, climate changes of weather in a year, in Chinese Lunar calendar. As a full circulation of 24 solar terms completed, that means a new year is coming again. I looked forward this design of Bing-shen year of Formosan macaques would remind ourselves of precious time and hopes we can use the time in a meaningful way.PS.<ol><li>If the one piece model of monkey tail is not easy to bend, we suggest to print the composed tail model.</li><li>Don't printing all models are small then 86% of original model size, and set up 0.15mm layer resolution.</li></ol>Design Software - SketchUp my settings ABS support angle 30 deg z resolution 0.2mm scale 100% <a target="_blank" href="https://www.facebook.com/paperworkers" rel="nofollow noopener">https://www.facebook.com/paperworkers</a> <a target="_blank" href="https://amaochan.work/work/" rel="nofollow noopener">https://amaochan.work/work/</a> <a target="_blank" href="https://www.youtube.com/watch?v=1MdAZr_GWi8" rel="nofollow noopener">https://www.youtube.com/watch?v=1MdAZr_GWi8</a>&nbsp;丙申年台灣獼猴2016/2/8到2017/1/27是華人世界的猴年，於是我設計了(丙申年台灣獼猴)用以慶祝一個新的年度來臨，並希望利用這個機會來提醒人們關注生活在台灣的獼猴與人的緊張關係。生活在高雄壽山的野生台灣獼猴群由於人類長期餵食，改變了牠們的自然覓食習性。當獼猴把人類當成提供食物的來源之一時，人猴衝突也因此發生。有一些獼猴會搶行人食物及入侵民宅偷食。不勝其擾的居民疑似也回頭傷害這些獼猴，已經發現了多件疑似毒殺獼猴的案例，有些獼猴身上甚至有明顯人為攻擊傷痕。有專家說已有超過200隻獼猴失蹤。這是人與自然相處最不好的狀況。生物學家建議的解決衝突最佳方法就是停止餵食獼猴，別再帶食物上山、不干擾、不接觸牠們，讓獼猴停止依賴人類，久之這些獼猴就會重新回到野生棲地。設計丙申年台灣獼猴時，我希望能在牠的身上標註出時間的印記，所以腳底下我幫他寫下(丙申)二字。天干地支是中國古代用以記錄時間的一種方式，一般人都認為12年後猴年又將回來，事實上相同的猴年在60年後才會循環回來，也就是今年的新生兒在遇到下個丙申年時他已經是60歲的人了。我在獼猴的身上設計了24個可轉動的節點，調整每一個節點都會影響到整體的動態與表情，這正代表傳統農曆24個(節氣)，每一小段的節氣都是一年當中氣候小轉折，每個節氣就像是一年當中天氣不同的表情。當24個節氣循環完成，新的一年又將來臨。我期望以這樣的設計來提示自己時間珍貴，並且期許自己能夠更有意義的利用時間。&nbsp;ps. 1.若是打印機列印品質不佳時可能會造成一體成型的尾巴無法成功彎折，此時可以另選分離式尾巴套件列印。 2.縮小列印時請別小於0.86，並提高列印解析度到0.15mm。同樣的檔案我也分享於 <a target="_blank" href="http://fastlab.tw/" rel="nofollow noopener">http://fastlab.tw/</a> 這是台灣資訊策進會剛剛成立的3D分享網頁，因為才剛建立所以作品不多，希望各位3D玩家也能慢慢豐富這個地方。配色建議 身體-灰或土黃 腹部-白 手指和腳指-深灰或黑 面部-橘色或粉紅<h2>Custom Section</h2><figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=1MdAZr_GWi8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/1MdAZr_GWi8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Bing-shen year of Formosan monkey

动物类玩具

MakerWorld

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/281253/2023-09-20_ca373507d148d.png"></figure>This 3D printed version of the tank strives to replicate the authentic details in terms of appearance, including intricate undercarriage details. It features a rotatable and elevating turret, three accessible hatches, rotating wheels and tracks, as well as a suspension system with articulated movement. Through careful disassembly, arrangement of components, and the addition of auxiliary structures, all parts can be printed without the need for supports. Furthermore, the openable chassis design preserves the potential for future internal structural DIY work.&nbsp;Parts count: 157Estimated build time: 1hTools: CA Glue-medium, hand drill, pen knife, sand paper&nbsp;More Details version print profileRecommended filaments:Bambu PLA Matte Desert Tan (11401)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043</a>&nbsp;Bmabu PLA Matte Latte Brown(11800)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035</a>&nbsp;Bambu PLA-CF Lava Gray(14101)<a target="_blank" href="https://store.bambulab.com/products/pla-cf?variant=40828231581811" rel="nofollow noopener">https://store.bambulab.com/products/pla-cf?variant=40828231581811</a>&nbsp;Hotend: 0.2mm Stainless Steel & 0.4mm Hardened SteelPrint time: 50.8h&nbsp;&nbsp;&nbsp;Time Saving version print profileRecommended filaments:Bambu PLA Matte Desert Tan (11401)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043</a>&nbsp;Bambu PLA Matte Latte Brown(11800)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035</a>&nbsp;Bambu PLA-CF Lava Gray(14101)<a target="_blank" href="https://store.bambulab.com/products/pla-cf?variant=40828231581811" rel="nofollow noopener">https://store.bambulab.com/products/pla-cf?variant=40828231581811</a>&nbsp;Hotend: 0.4mm Hardened SteelPrint time: 13.9h&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures when printing small parts&nbsp;Follow the Assembly Guide below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.

Panzerkampfwagen IV Tank

车类飞机类模型

MakeIt3D

<h2>Summary</h2>Tired of receipts, dust, and other debris clouding your workspace?This 3D Printable Mini Trashcan is the perfect tool for throwing away, storing, or disposing trash and other belongings.This print features a fully functioning built-in swing allowing you to store items inside without things accidently falling out.This item is easy to print featuring 2 main files<ul><li>LID STL</li><li>Bottom STL</li></ul>Total Size of the product is roughly 6 inches Height, 3.5 inches Width, 3.5 inches Length.Feel free to print out the designs and share photos of your results. I would love to see them. All MakeIt3D Designs are made and designed in-house. When you purchase any of these designs you do NOT have the rights to sell the digital files or printed models. 3D PRINTING SETTINGS Printer Used: Bambu Labs X1 Layer Height: 0.2 Infill: 10% - 15% Honeycomb Print Speed: Slow Speed on First Layers Material: PLA Wall Count: 2 Walls

3D Printable Mini Trash Can for Car and Office Use

汽车用品

maCyo42

<h2><a target="_blank" href="https://makerworld.com/en/models/133452#profileId-155723" rel="nofollow noopener">NEW AMS Riser V2 is released</a></h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2024-01-17_44483ed08d787.gif"></figure> <a target="_blank" href="https://makerworld.com/de/models/54960#profileId-56527" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-11-01_c95b7e28a2973.png"></a> Mods<figure class="table" style="width:93.96%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td style="border:3px solid hsl(0, 0%, 0%);height:280px;width:310px;"><figure class="image"><a href="https://makerworld.com/de/models/45759#profileId-47533" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-10-30_67b62d6e14237.png"></a></figure></td><td style="border:3px solid hsl(0, 0%, 0%);height:280px;width:310px;"><figure class="image image_resized" style="width:85.17%;"><a href="https://makerworld.com/de/models/53455#profileId-55205" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-10-30_5e484d88c7c34.png"></a></figure></td><td style="border:3px solid hsl(0, 0%, 0%);height:280px;width:310px;"><figure class="image image_resized" style="width:96.15%;"><a href="https://makerworld.com/de/models/57617#profileId-59380" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-11-05_42be75b9c601c.png"></a></figure></td></tr></tbody></table></figure><figure class="table" style="width:92.55%;"><table class="ck-table-resized"><colgroup><col><col><col></colgroup><tbody><tr><td style="border:3px solid hsl(0, 0%, 0%);text-align:center;">NEW</td><td style="border:3px solid hsl(0, 0%, 0%);"><figure class="image"><a href="https://makerworld.com/de/models/82112" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-12-03_c9af0f3d5a3a4.png"></a></figure></td><td style="border:3px solid hsl(0, 0%, 0%);"><figure class="image image_resized" style="width:88.08%;"><a href="https://makerworld.com/de/models/53336#profileId-55112" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-10-30_07c5c51104054.png"></a></figure></td></tr></tbody></table></figure>First i would like to thank you Ben Levi for this awesome Design! I like the Design of Ben very much but i want to use a full around the top Lightstrip so i started my Remix. Then.. one came to another. Like you know it when you walk around and see many Things you can design to print. :-D<figure class="table"><table><tbody><tr><td><figure class="image"><a href="https://www.surveymonkey.com/r/JQ6DQFS" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-10-26_5365ec7b49877.png"></a></figure>@ https://www.surveymonkey.com/r/JQ6DQFS</td></tr></tbody></table></figure>X1C Owners ! If you have an X1C Printer heres my Remix of the Front Dash Parts for your Printer<a target="_blank" href="https://makerworld.com/de/models/45759#profileId-47533" rel="nofollow noopener">https://makerworld.com/de/models/45759#profileId-47533</a>  BOM & Status <img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-10-25_cfe77cd6608b6.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-10-25_d0f1103deaca6.jpg"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/415870/2023-10-11_53c0c0386bc29.png"></figure>

鱼缸