sofuz66

MiniRacer

Counter Strike 2 M4A1-S Printstream Remix from iClints ModelsCurrently printed with a Simple 2 tone White and Black PLA, with fixed/Adapted models such as-added optional Suppressor -fixed/changed Various models (Removed Hand Guard's gas tube, rail clamp sizing, Small part fixes for X1-C, Added Supports/Quality of prints, etc.)-Created plates with out the gate 3mf printable settings that are (Hopefully) very efficient&nbsp;Vastly still designed/Created by iClints Models,&nbsp;With the included parts on Plate 5, there is still needed various M3 Screws and Springs to make this prop function correctly (Triggers, mag drop, stock lock, and charging handle). I bought both an m3 screw kit ($13) and spring compression assortment kit ($14) on amazon that came with well over enough parts to make 30 of these. And I did use super glue on a couple connections (from gas tube to hand guard, butt pad, etc.). Other than that its designed that cut pieces of 1.75mm filament to fill pin holes to align various parts. This is still a prop, This doesn't fire anything. &nbsp;Attached is a original PDF that has Step-by-Step Instructions on creation of print.

CS2 Printstream M4A1-S (PLA)

3D design shop

This is a flexible, lizard It prints in place with no supports.with a flexible head, arms,legs,body and tail! &nbsp;&nbsp;Otherwise try to check the new version of the same Lizard <a target="_blank" href="https://makerworld.com/en/models/90082#profileId-96508" rel="nofollow noopener">https://makerworld.com/en/models/90082#profileId-96508</a>&nbsp;&nbsp;&nbsp;No supports or assembly required just print.

The Lizard-dragon evileye - flexible multi color -

Stuff

make 3D

This riser adds 18.5mm to the top glass height. This does help some with the “filament pull out error” as the PTFE tubes is not bend by the glass.&nbsp;This riser design allows for a LED strip to be installed with 3D printed diffusers for a softer light.&nbsp;Benefits of this design:<ul><li>Soft inner corners allows the LE strip to follow along without any sharp bends. And no soldering is needed.</li><li>The riser is designed so you can install 4 diffusers so the LED strip does not shine too hard.</li><li>The design of the riser does not need any support for printing. (no additional clean-up is needed)</li><li>All parts snap perfectly together and does not require screws or glue.</li><li>All 4 main parts are labeled with numbers to ensure an easy assembly.</li><li>No Support material is needed - the riser only needs assembly.</li></ul>&nbsp;My riser are printed in:SUNLU PLA+ BlackGEEETECH Matte PLA White&nbsp;For P1S users: you can just use a regular USB LED strip with the USB port next the the screen. (inside the printer)&nbsp;When installing the diffusers, make sure you assemble them in the correct orientation.The two long cutouts on the diffusers should be on the front of the riser:<figure class="image image_resized" style="width: 42.03%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000099746/design/2023-12-19_6fa5cbffef518.png"></figure>LicensingAll my designs are non-commercial and may not be sold, reproduced, or shared outside of this website.For some designs it is possible to buy a individual license for a fixed fee. Please contact me for any details regarding this.&nbsp;How to Support MeIf you like my designs, please give them a ‘like’ as this helps the model being more visible to other users.Also please consider donating via <a target="_blank" href="https://www.buymeacoffee.com/make3d" rel="nofollow noopener">https://www.buymeacoffee.com/make3d</a>  All support is highly appreciated!&nbsp;UPDATE 21-12-2023:I have changed the design of the front panels for it to fit the P1P model - I was informed the P1P was a tiny bit smaller and the original riser would not fit.I have not tested this myself, but got the dimensions from another user.&nbsp;UPDATE 24-12-2023:I have added a hole on the back left side for wiring to external power supply. This is mostly for all X1C users.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000099746/design/2023-12-24_66023a61afd7d8.png"></figure>UPDATE 26-12-2023 (Version 4):I have changed the hole shape so you are able to wire a USB plug or power supply without having to solder any wires.<figure class="image image_resized" style="width: 61.51%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000099746/design/2023-12-26_a3eb603bd25768.png"></figure>

CS2

Stuff

Bambu Lab