skywolf

Bambu Lab

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000014265/design/2023-09-19_8d08d601f168.png"></figure>Let&#39;s start a marble race with friends! This marble run features a series of elements including elevator, starting line, randomized dividers, elevated track, large funnel, spiral, and loop section. It allows competition of multiple marbles, with each segment introducing an element of unpredictability. The excitement continues all the way to the end!&nbsp;Recommended filaments: Bambu PLA series, PLA Basic is recomended for more smooth track<a target="_blank" href="https://store.bambulab.com/collections/bambu-lab-3d-printer-filament?gf_60645=279355719795" rel="nofollow noopener">https://store.bambulab.com/collections/bambu-lab-3d-printer-filament</a>Hardware Kit: Marble Run Components Kit-003<a target="_blank" href="http://store.bambulab.com/products/marble-run-components-kit-003" rel="nofollow noopener">http://store.bambulab.com/products/marble-run-components-kit-003</a>&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures.&nbsp;Follow the video tutorial step by step to print and assemble your build. <figure class="media"><div data-oembed-url="https://youtu.be/8_Su9jdzgNA"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/8_Su9jdzgNA" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>

Marble Run 003

玩具

Curious Mint

Lego bricks that are perfect for printing out spares to replace missing pieces. &nbsp;Good accuracy is required to produce Lego compatible bricks, watch <a href="https://www.youtube.com/watch?v=GUz4YCnuNOQ" rel="nofollow">this YouTube video</a> if you're having trouble.&nbsp;DisclaimerLEGO®, the LEGO logo, the Minifigure, and the Brick and Knob configurations are trademarks of the LEGO Group of Companies which does not sponsor, authorize, or endorse this.

Lego Bricks

乐高

mclanesmemories

Wall Art - Asian Designs - Red on Black and White - Walking in the Gardens of the Temple&nbsp;Please share your prints&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Swap Instructions: Start with Black At layer #4 (0.40 mm) swap Red At layer #10 (0.88 mm) swap to Grey At layer #18 (1.52mm) swap to white

Wall Art - Asian Designs - Red on Black and White - Walking in the Gardens of the Temple

照片类

@H_N

请严格按图四五摆放  建议壁厚3层  填充率99%   打印后使用胶水拼接。&nbsp;Please place it strictly according to Figure 45 The recommended wall thickness is 3 layers, and the filling rate is 99% Use glue splicing after printing.

尾翼  empennage

汽车配件

Neebick

Master Sword pen that is designed to use Pilot G2 ink refills (Gold and silver inks are available for extra fun). I designed the hilt for multiple color printing but looks very nice in all silver as well.<h3>Printing</h3>The model prints great with a 0.4mm nozzle. All pictures are printed with it at 0.08mm layer height. A 0.2mm nozzle will look better with finer details like the Triforce on the blade but is optional.&nbsp;Print at lower layer heights for better detail and smoother feel while handling.&nbsp;Supports are necessary for the hilt at the section that the blade inserts into. Supports also helps with the blade top since it is very narrow on the plate and could jostle loose. The screw must be printed vertically for best detail and function.&nbsp;I printed the blade in Bambu Labs Basic PLA Silver. This filament gave a very smooth and satisfying to touch finish without paint. I had to print on separate plates to achieve it since unsightly bulges appeared when the nozzle moved between parts to often. This is most likely due to the tall and skinny profile of the parts.<h3>Assembly</h3>The hilt prints in two halves for better detail and less filament waste on purges. Remove supports and glue halves together. Alignment is important for appearance and part fitment.<figure class="image image_resized" style="width:32.89%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_8fcaf10bf4d81.png"></figure>&nbsp;The blade top inserts into the hilt. Friction fitting will hold but glue can be used for a more permanent assembly.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_43c74889e437e8.png"></figure>&nbsp;Slide Pilot G2 refill cartridge into blade body. It will not go all the way in. The fitment is purposely tight for better feel while using as a pen.<figure class="image image_resized" style="width:30%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_944e3f5ee510a8.png"></figure>&nbsp;Slowly screw in the blade top into the blade body. You will feel a slight resistance as the screw pushing against the ink cartridge. Continue till the parts align flush. DO NOT over tighten to avoid damage to the threads. There is a slight over tightening allowance but you will not be able to get an additional turn without damaging the parts.<figure class="image image_resized" style="width:31.67%;"><img src="https://makerworld.bblmw.com/makerworld/draft/549416/2024-02-01_80381d0adb3148.png"></figure>&nbsp;To remove the ink cartridge, unscrew the top and press the tip against a piece paper. There should be a slight pop as the the pen tip aligns with the blade tip. The cartridge should just shake out now.

Master Sword Pen

动漫模型

MakerWorld

<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/281253/2023-09-20_ca373507d148d.png"></figure>This 3D printed version of the tank strives to replicate the authentic details in terms of appearance, including intricate undercarriage details. It features a rotatable and elevating turret, three accessible hatches, rotating wheels and tracks, as well as a suspension system with articulated movement. Through careful disassembly, arrangement of components, and the addition of auxiliary structures, all parts can be printed without the need for supports. Furthermore, the openable chassis design preserves the potential for future internal structural DIY work.&nbsp;Parts count: 157Estimated build time: 1hTools: CA Glue-medium, hand drill, pen knife, sand paper&nbsp;More Details version print profileRecommended filaments:Bambu PLA Matte Desert Tan (11401)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043</a>&nbsp;Bmabu PLA Matte Latte Brown(11800)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035</a>&nbsp;Bambu PLA-CF Lava Gray(14101)<a target="_blank" href="https://store.bambulab.com/products/pla-cf?variant=40828231581811" rel="nofollow noopener">https://store.bambulab.com/products/pla-cf?variant=40828231581811</a>&nbsp;Hotend: 0.2mm Stainless Steel & 0.4mm Hardened SteelPrint time: 50.8h&nbsp;&nbsp;&nbsp;Time Saving version print profileRecommended filaments:Bambu PLA Matte Desert Tan (11401)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=41159118717043</a>&nbsp;Bambu PLA Matte Latte Brown(11800)<a target="_blank" href="https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035" rel="nofollow noopener">https://store.bambulab.com/products/pla-matte-filament?variant=40904271954035</a>&nbsp;Bambu PLA-CF Lava Gray(14101)<a target="_blank" href="https://store.bambulab.com/products/pla-cf?variant=40828231581811" rel="nofollow noopener">https://store.bambulab.com/products/pla-cf?variant=40828231581811</a>&nbsp;Hotend: 0.4mm Hardened SteelPrint time: 13.9h&nbsp;Please make sure you clean the build plate before printing and/or applying glue to prevent print failures when printing small parts&nbsp;Follow the Assembly Guide below step by step to print and assemble your build. Refer to the Design Guide for further design and quality enhancement.

Panzerkampfwagen IV Tank

车类

sauryyyyy

Cinnamoroll from Sanrio

Cinnamoroll

摆件挂件

ideat0m

<a target="_blank" href="https://makerworld.com/en/u/1897072971/collections" rel="nofollow noopener">More puzzle in my collections.</a> ----------------------------------------------------Insertion puzzles allow children to develop their motor skills and orientation in the shapes of objects. Individual parts are inserted into their place in the picture. The parts fit together beautifully and simply. Can also be used as a decoration. This particular puzzle has four parts and I believe it will bring a lot of fun. -----------------------------------------------------Vkládací puzzle umožňuje dětem rozvíjet jejich motoriku a orientaci v tvarech předmětů. Jednotlivé části se vkládají na své místo v obrázku. Díly do sebe krásně a jednoduše zapadají. Lze použít také jako dekoraci. Toto puzzle je tvoreno ctyrmi dily a verim ze prinese spoustu zabavy.

Rhino / Rhinocenos insert puzzle for kids

益智类

uhltimate

Description:Introducing my 6-Shot Disc Shooter that launches discs over 8 meters!&nbsp;<figure class="media"><div data-oembed-url="https://youtu.be/gTluRbJBJP0"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/gTluRbJBJP0" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;Features:<ul><li>Impressive Range: Launch discs with precision over 8 meters.</li><li>6-Shot Magazine: Experience continuous fun with swift and hassle-free reloading.</li><li>Compact and Portable: Take the excitement anywhere with this portable and compact design.</li></ul>Safety Guidelines:<ul><li>Aim responsibly, avoiding people, animals, or fragile items.</li><li>Always wear eye protection.</li><li>Keep the disc shooter out of reach of children.</li></ul>&nbsp;Some nice add-on parts and modifications:<ul><li>Mesmerizing Discs with colorized pattern by @BamBam Design <a target="_blank" href="https://makerworld.com/en/models/108108#profileId-115446" rel="nofollow noopener">https://makerworld.com/en/models/108108#profileId-115446</a></li><li>Magazine Extension - 12 Shots by @BamBam Design <a target="_blank" href="https://makerworld.com/en/models/109578#profileId-117052" rel="nofollow noopener">https://makerworld.com/en/models/109578#profileId-117052</a></li><li>Easy load handle by @madizmo <a target="_blank" href="https://makerworld.com/en/models/102564#profileId-109231" rel="nofollow noopener">https://makerworld.com/en/models/102564#profileId-109231</a></li></ul>&nbsp;Printing Tips:<h2>“set wall loops to 6 for the spring !”</h2>(or more ;-)Choose a durable filament for longevity.Ensure precise calibration for accurate dimensions.&nbsp;Print Orientation for the Frame (no Support required)<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/625784/2023-12-22_ca11c87353632.png"></figure>&nbsp;&nbsp;cutaway model (Assembly aid)&nbsp;<img src="https://makerworld.bblmw.com/makerworld/draft/625784/2023-12-18_0bc99f0ee1ade.jpg">&nbsp;

6-Shot Disc Shooter

玩具枪类

Benjamin Kott

Please refer to the description for print times and filament requirements. The available build plates include all components for both upper and under desk variations in each size. You have the flexibility to print only what suits your needs.<h2>Modular Desk Drawer with Fusion 360 Source Files.</h2>Whether you prefer a hassle-free printing experience or enjoy tinkering with customization, this desk drawer provides both options. Utilize the available print profiles for specific sizes or dive into the Fusion 360 file to explore a range of customizable parameters. The model is intelligently designed, automatically calculating and evenly spacing the pattern on the front. Say goodbye to manual adjustments – simply define the basic parameters and witness the magic of automated calculations! 😊<h3>Introduction</h3>Facing desk clutter and a lack of space, I sought a solution beyond traditional boxes. Constantly shuffling items between surfaces became tiresome, prompting me to design a drawer that blends seamlessly with my workspace.&nbsp;Seeking simplicity and functionality, I aimed for a design that integrates smoothly with my surroundings. As a programmer, gamer, and hobbyist, I spend countless hours at my desk, so creating an environment that fosters productivity and minimizes stress was paramount.&nbsp;Drawing on community feedback, I refined the model to meet practical needs, resulting in features like stackability, pull-out protection, on-desk usage, and optional handles. Although delicate, these enhancements elevate usability and aesthetics.&nbsp;I invite you to share your thoughts and contribute ideas for improvement. Your feedback is invaluable in shaping future iterations.<h3>Description</h3>The choice is yours: utilize it as a desk drawer or mount it beneath your desk for additional surface area. Engineered for seamless operation, the drawers feature rounded corners and rails to minimize surface drag resistance, ensuring smooth functionality. Built-in pull-out protection prevents accidental drawer removal, safeguarding your belongings from falling. If needed, the drawers can still be easily removed. With ample surface area, tape can be used for mounting; alternatively, angled boreholes allow for secure screwing underneath your desk for added stability. Two case options are available: one offers a sleek appearance even from the sides, while the other facilitates stacking and connecting multiple units using connectors for enhanced rigidity. Finally, a base and top cover complete the look, transforming it into an on-desk drawer and concealing any holes as desired. <figure class="table" style="width:97.18%;"><table class="ck-table-resized"><colgroup><col><col></colgroup><tbody><tr><td style="width:50%;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_c93f158139fe1.jpg"></figure>Under Desk Drawer Mode</td><td style="width:50%;"><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_d899642f12e4.jpg"></figure>Upper Desk Drawer Mode</td></tr></tbody></table></figure><h3>Demo v1</h3>This demo showcases the behavior of the initial iteration. While the video needs to be updated, it offers a glimpse into the capabilities of the Fusion 360 sources.<figure class="media"><div data-oembed-url="https://youtu.be/JAgiqoJdaw8"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/JAgiqoJdaw8" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure><h3>Customizable Parameters:</h3><ul><li>Height</li><li>Width</li><li>Length</li><li>Wall</li></ul><h3>Printing</h3>Printing this model is simple; there are no special requirements. Minimal support is provided for the large holes underneath the case, which can be disabled if desired, though it enhances their appearance and makes them easy to remove. Additionally, there is minimal support for the pull-out clamps on the drawer, which are essential; removing them would result in printing in mid-air.<h3>Print Times & Filament</h3><h4>Under Desk Drawer</h4><figure class="table" style="width:100%;"><table><thead><tr><th>Variant</th><th> </th></tr></thead><tbody><tr><th style="width:200px;">100x140x32 mm</th><td>~3.2 h ~136g Filament</td></tr><tr><th style="width:200px;">160x100x42 mm</th><td>~4.1 h ~182 g Filament</td></tr><tr><th style="width:200px;">220x160x42 mm</th><td>~7h ~346 g Filament</td></tr></tbody></table></figure>1x Drawer, 1x Holder Plain<h4>Upper Desk Drawer</h4><figure class="table" style="width:100%;"><table><tbody><tr><th style="width:200px;">Variant</th><td> </td></tr><tr><th style="width:200px;">100x140x32 mm</th><td>~9h ~349g Filament</td></tr><tr><th style="width:200px;">160x100x42 mm</th><td>~11h ~443g Filament</td></tr><tr><th style="width:200px;">220x160x42 mm</th><td>~17h ~816g Filament</td></tr></tbody></table></figure>2x Drawer, 2x Handle, 2x Holder Stackable, 4x Connectors, 1x Base, 1x Top<h3>Installation</h3><h4>Under Desk Drawer <img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_7e35b5b67fbaf.jpg"></h4>Secure this under-desk drawer to your table's underside using Countersunk screws (refer to recommendations). Ensure the screws sit flush for optimal stability. For a smooth installation, consider predrilling holes before mounting. Enjoy a sturdy and functional addition to your workspace! Alternatively, use tape for a hassle-free attachment— the ample surface area makes it suitable. <img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_b8c3f05ece19a.jpg">&nbsp;Check Screw Recommendations / Tape Recommendations.&nbsp;Partslist Example<ul><li>1 Drawer</li><li>1 Holder Plain</li><li>4 Screws / Strong Double Sided Tape </li></ul><h4>Upper Desk Drawer:</h4><img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_e1d73468305ae.jpg"> Partslist Example:<ul><li>1 Base</li><li>1 Top</li><li>2 Drawer</li><li>2 Holder Stacking</li><li>2 Handles</li><li>4 Connectors</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_a598f2f3689da.jpg"></figure>Add the connectors into the holes on the holder. They are press-fit, so you need to apply some force. After you insert them on one side hold them together and repeat the stop on the opposite side.<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_bfe29f66d8cad.jpg"></figure>You can then simply put them onto the base, and add the top. Please note: The base and top only COVER the holes, there is no direct connection. The covers are very small and brittle. Once added nothing will happen to them. If you want a forced connection I recommend gluing them onto the Holders.&nbsp;<h4>Optional Handle:</h4>Apply firm and even pressure to the handle, pressing it into the grip area. The layer lines on the handle create a tight and secure fit. Use controlled force to avoid any damage to the handle or the drawer. If you desire additional stability, you can optionally apply some glue around the base of the handle. Ensure the glue is evenly distributed for a secure bond. If you haven't used glue and need to remove or replace the handle, gently wiggle it out of the grip area.<figure class="table" style="width:100%;"><table><tbody><tr><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_8e1e3a0603e1e.jpg"></figure></td><td><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-02-06_41a67c3fba9d3.jpg"></figure></td></tr></tbody></table></figure><h4>Screw Recommendations:</h4>With the lowered back, there's increased flexibility for screws that aren't perfectly flat. The cutout is designed for 8mm diameter screws, accommodating 4x something mm screws snugly. While 3.5x and 3mm will work, the latter leans towards the flimsy side.<ul><li>Spax 4x16 mm - TIGHT! <a target="_blank" href="https://amzn.eu/d/8YUU522" rel="nofollow noopener">https://amzn.eu/d/8YUU522</a></li><li>Spax 3.5x16 mm - OK! <a target="_blank" href="https://amzn.eu/d/by5afRT" rel="nofollow noopener">https://amzn.eu/d/by5afRT</a></li><li>Spax 3.0x16mm - Flimsy <a target="_blank" href="https://amzn.eu/d/iOn9AWF" rel="nofollow noopener">https://amzn.eu/d/iOn9AWF</a></li></ul>Tape Recommendations: When taping it to the underside of your desk, invest in quality tape designed for this purpose. I recommend 3M VHB 4611; a small amount goes a long way. Choose your placement wisely because once it adheres, it stays securely in place.<ul><li>3M VHB 4611 <a target="_blank" href="https://amzn.eu/d/buqRvMa" rel="nofollow noopener">https://amzn.eu/d/buqRvMa</a></li></ul><h3>Timelapse v1</h3>This video is still showing a timelapse of the first iteration.<figure class="media"><div data-oembed-url="https://youtu.be/JmUWZjHJkQw"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/JmUWZjHJkQw" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>&nbsp;I hope you enjoy the design, please leave a comment/rating if you enjoy it or share your feedback!&nbsp;<h3>Updates</h3>For updates, all original STL files, the Fusion 360 file, and my print profiles will be refreshed. Before printing, please ensure the accuracy of the profiles not provided by me.<h4>28.01.2024 - Release v3</h4>I want to express my gratitude to everyone who provided feedback on the model. Consolidating all the input, it took some time, but as I continue to learn CAD and Fusion 360, and with around four months of 3D printing experience, I'm pleased to share an improved model. Despite the increased print time and filament usage, the updated version is now significantly sturdier and more reliable, enhancing the overall feel when using the drawer. 😊&nbsp;I'm actively updating the description to reflect these changes. However, I wanted to release the model files promptly to address the layer adhesion problem that some users encountered. Your support is greatly appreciated! <img src="https://makerworld.bblmw.com/makerworld/draft/711082/2024-01-28_1fd67753fba56.jpg">&nbsp;<ul><li>Height Adjustment You may observe a 2mm height increase – no worries, existing drawers remain compatible. The added height accommodates the new holder design, providing a snug fit around the drawer.</li><li>Holder Upgrade The holder is now enclosed, resolving previous layer adhesion issues. Print vertically for enhanced stability and rigidity. Bonus: Easily install with double-sided tape.</li><li>Holder Variants Responding to user requests, two holder variants are available. Choose between a sleek variant for mounting below the desk or a stackable version with connectors.</li><li>Pull-Out Protection Introducing a "pull-out" protection feature. While you can still pull it out, you'll experience minimal resistance. The strategically placed stopper ensures enough drawer remains in the holder.</li><li>Additional Features Added a Top Cover for desk drawer use. Included a Base for elevating the drawer.</li></ul>Enjoy the enhanced functionality and versatility of the updated release! Feel free to reach out with any questions or feedback.<h4>27.01.2024</h4><ul><li>Added an optional Handle</li></ul><h4>21.01.2024 - Release v2</h4>Based on Feedback the models were slightly adjusted. These improvements are compatible with previous printed parts. That means you can replace the mount or the drawer and keep the other one.<ol><li>I get that it´s tough to have the right screws at hand. The back of the drawer was lowered by 3mm to allow screws not to sit 100% flat flush and have a bit more room.</li><li>The back of the mount is now reinforced. It is now a little bit taller than before and has cross struts on both sides to make the mount more rigid.</li><li>I increased the walls to 3 and the bottom layers to 5, this will make a more solid infill and also increase the rigidity.</li></ol><h3>More Fusion 360 Parameterized Models</h3><ul><li>Organizer Box <a target="_blank" href="https://makerworld.com/en/models/103266" rel="nofollow noopener">https://makerworld.com/en/models/103266</a></li><li>Organizer Box Diamond Edition <a target="_blank" href="https://makerworld.com/en/models/147775" rel="nofollow noopener">https://makerworld.com/en/models/147775</a></li><li>Stackable Storage Bin <a target="_blank" href="https://makerworld.com/en/models/114250" rel="nofollow noopener">https://makerworld.com/en/models/114250</a></li><li>Modern Vase 1 <a target="_blank" href="https://makerworld.com/en/models/108166" rel="nofollow noopener">https://makerworld.com/en/models/108166</a></li></ul>

Desk Drawer Modular

收纳

soerenharaldsson

I have reorganized my desk and designed this mounts for it, it is part of my new desk-mount-series, which includes mounts for<ul><li><a target="_blank" href="https://makerworld.com/en/models/160442#profileId-176120" rel="nofollow noopener">iPad/Tablet Mount</a> <img src="https://makerworld.bblmw.com/makerworld/draft/628302/2024-01-28_f1287f05bc01f8.png">  </li><li><a target="_blank" href="https://makerworld.com/en/models/164984#profileId-181205" rel="nofollow noopener">iPhone/Smartphone Mount</a> <img src="https://makerworld.bblmw.com/makerworld/draft/628302/2024-01-28_8792bc056511d.png">  </li><li><a target="_blank" href="https://makerworld.com/en/models/160456#profileId-176144" rel="nofollow noopener">MagSafe Mount</a> <img src="https://makerworld.bblmw.com/makerworld/draft/628302/2024-01-28_f259fa87474b58.png">  </li><li><a target="_blank" href="https://makerworld.com/en/models/160474#profileId-176163" rel="nofollow noopener">Apple Watch Mount</a> <img src="https://makerworld.bblmw.com/makerworld/draft/628302/2024-01-28_947834e96e4488.png">  </li><li><a target="_blank" href="https://makerworld.com/en/models/160469#profileId-176159" rel="nofollow noopener">Headphones (Organic Design) Mount</a> <img src="https://makerworld.bblmw.com/makerworld/draft/628302/2024-01-28_46e89a7dbb6db.png">  </li><li><a target="_blank" href="https://makerworld.com/en/models/160462#profileId-176151" rel="nofollow noopener">Laptop Stand (Organic Design) Mount</a> <img src="https://makerworld.bblmw.com/makerworld/draft/628302/2024-01-28_f8ec0a481239a.png">  </li><li><a target="_blank" href="https://makerworld.com/en/models/165025#profileId-181250" rel="nofollow noopener">Shelf Bracket - if the shelf is not mounted on the wall</a> <img src="https://makerworld.bblmw.com/makerworld/draft/628302/2024-01-31_04bbe9d293c1a8.png">  </li></ul>Overview:<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/628302/2024-01-28_d5a8ec52ea4ae.png"></figure>&nbsp;&nbsp;I have printed all of them with Bambu PLA-CF, the surface is super smooth&nbsp;I have also tested a layer height of 0.2mm, but I think it looks much nicer with 0.16mm, especially with mounts that you see directly every day. Have fun with it&nbsp;&nbsp;&nbsp;------------------------- ❤️ Thanks for ur support ❤️&nbsp;usually make the designs for myself, I am also happy to make them available... Work doesn't have to be done twice. 🤷♂️&nbsp;If you like the files and would like to support me a little, I would be thankful 🖖🤓https://www.buymeacoffee.com/soerenharaldsson

MagSafe Mount

生活配件

Jaxel

If you have more than one AMS, you will need an AMS hub. The problem I had, was the AMS hub was sold out; it was also $50!&nbsp;As it turns out, the AMS hub is really nothing more than a big-bro version of the AMS buffer, with a 4-in-1 splitter built in. You don't need to get it, as you can actually print your own splitter, and attach your own PC4-M10 heads. But why do that, when you can simply adapt the $6 AMS hub LITE! So that's what I did.&nbsp;This model uses the <a target="_blank" href="https://us.store.bambulab.com/products/ams-lite-filament-hub" rel="nofollow noopener">$6 AMS hub LITE</a>, and a PTFE tube coupler.This is completely non-destructive, as it does not require you to cut or sand the hub.&nbsp;You do not need to buy the PTFE tube coupler, as one comes with each AMS. Just depress the black end of the PTFE tube coupler and slide it into the model and the AMS hub LITE. The model will keep the black end depressed, which is essential to stop the PTFE teeth from interfering with filament input. Use either 18mm or 20mm M3 bolts to attach the hub to the back of your printer. Your PTFE tube into the buffer should be 58mm in length.&nbsp;You can find other models I have released for the X1C/AMS here:<a target="_blank" href="https://makerworld.com/en/u/2811301167/collections/109412" rel="nofollow noopener">https://makerworld.com/en/u/2811301167/collections/109412</a>&nbsp;If you appreciate my models, please consider <a target="_blank" href="https://ko-fi.com/ultrajaxel" rel="nofollow noopener">buying me a coffee</a>!

X1C AMS Hub LITE Adapter (input)

拓竹相关

Little Maker

This was my first 3D creation, a flexi wolf that is very easy to print.&nbsp;It includes two models, the flexi wolf and another one of a keychain.&nbsp;Hope you like it!

Flexi wolf - Wolf keychain

关节玩具

wuguigui

This lampshade is designed for the Bambu Led Lamp 001, the structure has been tested to fit the base well.There are 2 styles for choice, have fun!Disclaimer: This model is part of the Creator Program, When you purchase the LED Lamp Kit-001 through the links below, creators may earn an affiliate commission as a reward of their work. (The creator program is currently in the trial phase. The application is not yet open to the public.)Hardware Kit: <a target="_blank" href="https://shrsl.com/4cxd4" rel="nofollow noopener">LED Lamp Kit 001</a>Recommended filaments: <a target="_blank" href="https://shareasale.com/r.cfm?b=2282157&amp;u=4048186&amp;m=138211&amp;urllink=store%2Ebambulab%2Ecom%2Fproducts%2Fpla%2Dtough&amp;afftrack=" rel="nofollow noopener">Bambulabs PLA Tough</a>, or other <a target="_blank" href="https://shareasale.com/r.cfm?b=2354730&amp;u=4048186&amp;m=138211&amp;urllink=&amp;afftrack=" rel="nofollow noopener">Bambu Filaments</a>&nbsp;A new  <a target="_blank" href="https://makerworld.com/en/models/162037#profileId-177867" rel="nofollow noopener">Icosahedron lamp</a> based on LED Lamp Kit 001 as well<a target="_blank" href="https://makerworld.com/en/models/162037#profileId-177867" rel="nofollow noopener">https://makerworld.com/en/models/162037#profileId-177867</a><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000020185/design/2024-01-29_e386c32664eed.png"></figure>&nbsp;

lampshade for LED Lamp Kit

灯相关

IKEA Skadis Bambu Lab P1&X1 Sheet Holder 7 sheets 宜家洞洞板拓竹P1&X1打印版支架 7片

宜家洞洞板

基于原作者做了一些修改1.去除五金件，直接使用中国结连接2.去除中国结坠子附加购买品，使用打印中国结和坠子3.修改蜡烛底座，参考市场上通用的电子蜡烛设计，可以卡的很牢固，开关处掏空处理，方便开关。4.2024 采用翻面打印，效果看起来会好一些。

玩具

乐高

照片类