skyweb

CRD-3D

Another take on classic PlayStation Logo. B&W version.Enjoy&nbsp;If you enjoy my work you could buy me a cup of coffee as a token of appreciation. Thanks<a target="_blank" href="https://www.buymeacoffee.com/crd3d" rel="nofollow noopener">https://www.buymeacoffee.com/crd3d</a>

PlayStation Logo Light Box

lachimalaif

Holder for small boxes to lidl parkside pegboard.It is functional for more box systems. Tried to two types of boxes (as photos).Print setup depend on your printer and filament quality. I used PET filament, 20% infill, two perimeters and 0,24mm high of layer. Load capacity depend on yours print quality. (of course you can print it more perimeters and infil, but from PET it is not necessary) Good luck and happiness with holders :)

Lidl pegboard box holder

Parkside

Jargcomp

I had someone request a version of this and had to color it. &nbsp;I wanted to make sure that I was able to use 4 colors for this so that I was able to use just 1 AMS.&nbsp;The four base colors are Black (Color of coat)Brown (Color of stick)White (Color of hands and head)Pink (Color of shirt and tie)&nbsp;Here is a guide to help you with colors when printing - Hopefully it makes sense but ultimately you can do 6+ colors on one ams. Plate 1 has a pause that I put in it to help with changing filament between the tie and vest to the neck and head. <figure class="table" style="width:86.48%;"><table class="ck-table-resized"><colgroup><col><col><col><col><col><col><col><col></colgroup><tbody><tr><td>AMS Slot</td><td>Color Default</td><td>Plate 1 Before Pause</td><td>Plate 1 After Pause</td><td>Plate 2</td><td>Plate 3 </td><td>Plate 4</td><td>Plate 5</td></tr><tr><td> </td><td> </td><td>Torso - Bottom</td><td>Torso - Top</td><td>Legs and Pole</td><td>Grass and Pole</td><td>Hands and Arms</td><td>Hat and Pipe</td></tr><tr><td>1</td><td>Black</td><td>Black</td><td>Black</td><td>Black </td><td>Green</td><td>Black</td><td>Black</td></tr><tr><td>2</td><td>Pink</td><td>Pink</td><td>Pink</td><td>Pink</td><td>Pink</td><td>Pink</td><td>Pink</td></tr><tr><td>3</td><td>White</td><td>Baby Blue (Vest)</td><td>White</td><td>White</td><td>White</td><td>White</td><td>White</td></tr><tr><td>4</td><td>Brown</td><td>Blue Purple (Tie)</td><td>Brown</td><td>Brown</td><td>Brown</td><td>Brown</td><td>Brown </td></tr></tbody></table></figure>

Turnip Head From Howl's Moving Castle

Anime

3DPmom

<figure class="media"></figure><img class="image_resized" style="width: 30.59%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/b50369d8-d175-46ad-80d6-b86a1393e919">These are fun rockets with boosters that extend on take-off. I designed two sizes and each contain two parts: the main rocket body and the boosters. The larger rocket has four small boosters and the smaller rocket has one large booster.  These make great little gifts or party favors 🚀&nbsp;<img class="image_resized" style="width: 30.5%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/41d3f34e-0eac-43be-ba01-6c384316d3ca">Layer Height 0.2mmPLA works great15-20% InfillSupports needed for the area around the boosters on the Large Rocket&nbsp;Dimensions of Large Rocket: 4in x 2 3/8inDimensions of Small Rocket: 3 1/4in x 1 7/8in&nbsp;There are two ways you can print these rockets (I included both in their print profiles):<ol><li>Print the complete rocket: this prints great but if you want multi-color for the boosters (and/or fins) it’s going to take some time (I found 8-10hrs)</li><li>Print the boosters first, print the rocket second pausing at layer height 15.6mm for the large rocket and 30.6mm for the small rocket, drop the boosters in and then continue printing. This method is much faster:)</li></ol>&nbsp;In the print profile for the small rocket I included the complete rocket to print on plate #1. On plates #2 &amp; #3 I separated the rocket from the boosters, so they can be printed separately (make sure to print the boosters first:)&nbsp;In the print profile for the larger rocket I included the complete rocket to print on plate #1. On plates #2 &amp; #3 I separated the rocket from the 4 sets of small boosters so they can be printed separately (again make sure to print the boosters first:)&nbsp;Note: supports are needed for the larger rocket at the base around the rings for the boosters. I have included those supports in my print profile. (Also note if you are printing plate #3, I did not include supports in the booster chambers so that they are clear to drop the boosters in:)&nbsp;<img class="image_resized" style="width: 30.6%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/5e3a3622-4ff3-47e6-adc2-303a5155681a">My designs are free for personal and non-commercial use. If you would like to sell them for commercial use, send me a message and we can discuss the details:)&nbsp;<img class="image_resized" style="width: 30.54%" src="https://makerworld.bblmw.com/makerworld/model/DSM00000000149136/design/e757d34e-1fcd-4b04-b6fe-8c0d913c3a49">If you like my work and want to help support it, you can buy me a Diet Coke at <a target="_blank" href="https://www.buymeacoffee.com/3dpmom" rel="nofollow noopener">https://www.buymeacoffee.com/3dpmom</a> Thanks so much!&nbsp;Have fun printing these…they’re a blast 🚀

Rocket with Boosters (2 Sizes)

Space

Jonathan_Sto

25cm wide divisible shelf for the Ikea Skadis board. I recommend Tree Support for the hooks. The shelf can be divided every 10mm.

PS5

Parkside

Anime

Space

Ikea

Coffee

Plant