sknutson913

Classic 2.5

Picture Frame VI&nbsp;I used an old Spool of Metallic Filament. Your Print will most likely look better :)&nbsp;

Picture Frame VI

frames

Code_Craft

For a more stabilized version, please check out my new model: <a target="_blank" href="https://makerworld.com/en/models/483450#profileId-395641" rel="nofollow noopener">Stabilized Milwaukee M12/M18 Charger Wall Mount</a>, both available in PETG and PLA. If you have any suggestions or issues, please reach out!&nbsp;Maximize your workshop space with the Milwaukee RapidCharge Station Wall Mount, designed for seamless integration with Milwaukee M12 and M18 battery chargers. Constructed using PETG filament for durability, this mount features a 0.2mm layer height, 4 walls, and 25% gyroid infill to ensure robustness and longevity. Easy to install, it’s an essential upgrade for any professional or DIY workspace, promoting efficiency and organization.&nbsp;Includes 2 variations:<ul><li>1 with mounting holes optimized for a m4 screw</li><li>1 with mounting holes optimized for a #6 screw</li></ul>

Milwaukee M12/M18 Charger Wall Mount

garage

Lucky 13 Toys

<h3>Mini 13 is now on a CC BY 4.0 license!</h3>This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on your product page:<figure class="table" style="width:65.75%;"><table class="ck-table-resized"><colgroup><col></colgroup><tbody><tr><td><a target="_blank" href="https://makerworld.com/en/models/183758#profileId-202617" rel="nofollow noopener">MINI 13 Printable Jointed Figure </a>© 2023 by <a target="_blank" href="https://www.lucky13toys.com/" rel="nofollow noopener">Lucky 13 Toys </a>is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY 4.0 </a></td></tr></tbody></table></figure>Please help me build my identity as a creator by referring to this design by its original name. Don't pass off my work as your own product.Want to support future projects with a one-time donation? <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">Make a PayPal donation here!</a>&nbsp;— &nbsp;<a target="_blank" href="https://www.printables.com/@soozafone/activity/4153" rel="nofollow noopener">This is my own work, originally uploaded to Printables.</a><h4>Introducing MINI 13!</h4>Mini 13 is the next generation of <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure" rel="nofollow noopener">Lucky 13</a>: a fully 3D printable, highly posable, snap-together, modular, customizable, jointed figure - now optimized for faster and easier printing and even easier customization.&nbsp;With a jointed frame, a simple set of armor, and some example accessories, this starter set contains everything you need to start printing, playing, and making it your own.&nbsp;<h4>Printing</h4>The first three files give you all the parts you need to assemble the frame, armor, and extras. You can also print individual parts; the file name indicates if you will need to print more than one of each part (e.g. you would print 4 of the file mini13-frame-arm-4x.stl).&nbsp;I recommend PETG or ASA for the frame parts (PLA also works but the joints will weaken faster). The armor and extras can be printed in the filament of your choice.&nbsp;These are the settings I use for best results (at 100% scale and with a 0.4mm nozzle)<ul><li>Layer height 0.15mm (first layer 0.2mm)</li><li>3 perimeters</li><li>30% rectilinear infill</li><li>Slow down the first layer print speed (30% of default)</li><li>0.25mm elephant foot compensation</li><li>Print external perimeters first</li><li>No brim or support material</li></ul>You may need to tweak these settings and find what works best with your printer.&nbsp;<h4>Assembly</h4>The video and image below show how to assemble the model. All parts should snap snugly into place - no tools needed!&nbsp;<figure class="image"><img src="https://media.printables.com/media/prints/422353/rich_content/4d9a1afc-3189-4c46-96ba-e8538d53b13f/thumbs/cover/800x1034/png/single-page-assembly-guide.webp"></figure><h4>Customizing</h4>Mini 13 is meant to be customized! I'll be making my own expansions too, but I love seeing community remixes. Here are some tips to get started.<ul><li>Mini 13 uses the same head connection and hand size as Lucky 13, so any existing <a target="_blank" href="https://www.printables.com/model/148367-lucky-13-printable-jointed-figure/remixes" rel="nofollow noopener">Lucky 13 remixes</a> for alternate heads and handheld items should also work for Mini!</li><li>The ball joint size is 6mm (also the same as Lucky 13). The handheld accessories use a 4mm-diameter handle with a flat 3mm across:</li></ul><figure class="image image_resized" style="width:48.1%;"><img src="https://media.printables.com/media/prints/422353/rich_content/ca004e46-8ff8-4d53-a4c5-4865f65e173d/screenshot-2023-03-10-160926.png"></figure><ul><li>The basic armor provided here is intentionally simple, so you can use it as a starting point for your own designs!</li></ul><h4>More tips</h4><ul><li>Mini 13 is 3.5 inches or 9cm tall at 100% scale.</li><li>Printing a lot of small parts can be tricky. In my experience, the best way to keep prints from coming off the bed is to s l o w d o w n the first layer print speed!</li><li>You can also try adding a brim, printing parts one at a time, and increasing the scale of the parts.</li><li>The joints will inevitably get looser over time due to wear and the plastic relaxing. One solution is to disassemble the joint and apply a thin coat of super glue or clear nail polish to the ball. Let it dry completely, then reassemble.</li></ul><h4>Enjoy!</h4>I hope you have a great time with Mini 13. If you enjoyed this print, please consider making a donation <a target="_blank" href="https://www.paypal.com/donate/?business=65FUQ2SJMYDDS&no_recurring=0&item_name=Thanks+for+supporting+Lucky+13%21&currency_code=USD" rel="nofollow noopener">here.</a>

MINI 13 Printable Jointed Figure

Lily

ConTra

Spiderman headphone stand, you can scale it to smaller decoration, paintjob after print is much faster than print it with AMS

Spiderman head, headphone stand

Asher

m.cody.sims

Just a good Mando helmet!&nbsp;My profile doesn&#39;t have support on the inside of the helmet because I have found it didn&#39;t really help that much with the quality and it used a lot of filament. the very center of the inside will be rough because of this but it hasn&#39;t been an issue for me.&nbsp;For those wondering what I use for a face sheild I use a Hobart 770580 Face Shield Replacement Lens, Shaded from Amazon. I cut it to shape and use a little bit of hot glue along the front and near the temples. That seems to be enough. I would recommend getting air soft helmet padding for a custom fit and comfort.&nbsp;If you like my work, please consider supporting me by boosting my model or <a target="_blank" href="https://www.buymeacoffee.com/m.cody.sims" rel="nofollow noopener">buying me a coffee</a>!

Mandalorian Helmet One Piece

helmets

halil_d

Benötigt werden 2 stück 4x40mm spax schrauben

AMS Lite Wallmount Bambulab A1 Mini 

A1 Mods + Accessories

agepbiz

<figure class="media"><div data-oembed-url="https://www.youtube.com/watch?v=jj3vnPYccS4"><div style="position: relative; padding-bottom: 100%; height: 0; padding-bottom: 56.2493%;"><iframe src="https://www.youtube.com/embed/jj3vnPYccS4" style="position: absolute; width: 100%; height: 100%; top: 0; left: 0;" frameborder="0" allow="autoplay; encrypted-media" allowfullscreen=""></iframe></div></div></figure>Simple and clean looking Xbox Controller Standfits 8x3mm anti slip rubber pads (optional)&nbsp;Subscribe or follow me on:Instagram: <a target="_blank" href="https://www.instagram.com/agepbiz/" rel="nofollow noopener">https://www.instagram.com/agepbiz/</a> YouTube: <a target="_blank" href="https://www.youtube.com/user/agepbiz" rel="nofollow noopener">https://www.youtube.com/user/agepbiz</a> Twitter: <a target="_blank" href="https://twitter.com/agepbiz" rel="nofollow noopener">https://twitter.com/agepbiz</a>&nbsp;Printsettings: No raft Support Structures for best results where the rubber pads are 0,1-0,2mm layer height

Minimalistic Xbox Controller Stand

Xbox

JamesThePrinter

This set of squares all rotate independently. Each face has a different pattern to give a varying tactile sensation as you twist and play with it:<ul><li>Spiral</li><li>Sunburst</li><li>Wavy Lines</li><li>Stripes</li><li>Bubbles</li><li>Hexagons</li></ul>&nbsp;This was designed with 0.25mm clearances, so it prints easily with no special settings.&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;The filaments used in the picture above are:<ul><li>MatterHackers Quantum Green Raspberry PLA</li><li>Amolen Purple Blue PLA</li><li>polymaker PolyTerra Pastel Banana PLA</li><li>polymaker PolyTerra Sapphire Blue PLA</li></ul>

Fidget Squares

FIDGETS

Maty505

articulated lizard with crystals. best result with silk, color changing or rainbow filaments

Articulated Crystal Diamond Lizard

Articulated Models

dfreshkremer

Check out my profile and print VERSION 3 of these mini-screw drivers.  It is a much better model with better tolerances! &nbsp;These are mini screw drivers that are perfect for stocking stuffers! Would be good to keep in a car or kitchen junk drawer when in a pinch.I printed these in PLA.&nbsp;My machine (Bambu P1P) is really dialed in, and I have the perfect snug fit for the bits. However, if yours is too tight, you can scale it up by 1-2%. If you print these in PETG, you may also need to scale it by 1-2%, because PETG shrinks more than PLA.&nbsp;I printed these at either layer height of 0.1 or 0.15. I have not tested 0.2. With the small threads, the smaller layer height is better!&nbsp;The threads are tight at first but will loosen up and work perfectly after you use them a dozen times. I usually just open and close the cap 20x right after printing and then they work well.

Mini Screwdrivers

tools

Ocular Dynamic

Cool retractable karambit knife remix of a remix originally of cat claw box cutter. I'll have a profile that all one color and a 2nd profile with 2 plates, body separate from links so you can make them different colors if you wish.&nbsp;I only put supports for the hex nuts on the blade holder to make sure its clean. Push em out super easy with the hex key wrench through the hole from the other side.&nbsp;Assembly PartsFor Body:4x - M3x16mm screws4x - M3 Nuts&nbsp;For Blade:2x - M3x5 Screws2x - M3 Nuts&nbsp;Magnets [Optional]:3x - 6mm x 3mm

Retractable Karambit Knife

Shane

Cj 3DPRINT

Quick and easy to print cat bookmark.&nbsp;Link Here to see my other design:<ul><li><a target="_blank" href="https://makerworld.com/en/u/115355792" rel="nofollow noopener">https://makerworld.com/en/u/115355792</a></li></ul>Please put a like it's always a pleasure and follow me and sharing your prints 🙏🙏🙏.&nbsp;Printing instructions :0.2mm layer height2 walls10% infill

cat bookmark

Katrina 

GOGO-_-3d

Simple temp Tower. I just uploaded this profile here to be able to print temp towers with the handy app. I use it for PLA & PLA+&nbsp;

PLA + & PLA Temp Tower Print directly from handy app

Benchy/Test Prints

urbanplantito

Here is a fun and neat way to brighten up your desk and enjoy the start to each day with this tidy and fun Desk Calender.&nbsp;Month and Day cards are best printed face down (glass bed if you have access to one) with slower speeds and a lower Z offest to ensure nice smooth face finish.&nbsp;Hope you like, have fun and enjoy!&nbsp;Happy to answer any questions.

Desk Calender - Modudesk

Office

Big Simi

This is my remix of a stitch model found on Thingiverse. I upscaled the model and added all the colors.

Colored Stitch

Toy/Culture Models

3DPrintable.art

Cute Owl Piggy Bank, perfect for both kids and adults. Its wings open, allowing for the retrieval of saved money with ease.&nbsp;Individual parts provided (and a print profile) for an easy and faster multi-color print that can be fit and glued together.&nbsp;Please note that supports are recommended to print this model.&nbsp;COMMERCIAL LICENSE AVAILABLE: <a target="_blank" href="https://patreon.com/3DPA" rel="nofollow noopener">https://patreon.com/3DPA</a>&nbsp;Check out <a target="_blank" href="https://makerworld.com/en/u/943536974" rel="nofollow noopener">our other models</a>. Your likes and downloads support more content.&nbsp;Happy printing!&nbsp;

Cute Owl Piggy Bank

Arya

DžonSnou

Printed with PLA,PETG, ABS, ASA, ASA275 at 0.2 or 0.3mm layer height, 15% infill without supports.

Cute cat cookie cutter

Household/Cooking

maegu_

Wall Art - Home Sweet Home&nbsp;

Wall Art - Home Sweet Home

Wall Art

shahravi94

I've included 2 versions. The smaller one should fit on a standard Ender sized bed. The larger one fits on a 300mm^2 bed.&nbsp;No supports required. I printed with 10% infill and 2 walls.