skipperjohnn

LemonArts

1967 Shelby Mustang GT 500 Model Kit a model of the legendary Car Easy to Print. Multicolor use glue to assemble <figure class="image image_resized" style="width: 73.8%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497166/design/2024-06-15_e980d4cba3d34.jpg"></figure><figure class="image image_resized" style="width: 74.28%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497166/design/2024-06-15_e3fc65b6eabf1.jpg"></figure><figure class="image image_resized" style="width: 74.24%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000497166/design/2024-06-15_16f9c61e69231.jpg"></figure>

1967 Shelby Mustang GT 500

Cars

w3r3wolv3s

Marvel Spider-Man logo as a dimensional mosaic wall hanging. Nine versions included (2-4 color).&nbsp;I printed this with Polymaker PLA Pro Metallic, Polymaker Silk PLA, and eSun PLA+.&nbsp;Note: I wanted them as big as possible, so yes they print over the initial filament trace. It won&#39;t hurt anything, but you can always scale yours down a little and reposition.

Marvel Spider-Man Dimensional Mosaic

Comic Book

LimaMike3D

Larger version of my F4U Corsair wallart (aprox. 106cm long), separated into pieces (Small version and other models can be found here). default scale maxes out P1/X1/A1 bed, can be scaled down to about 50% to allow for two walls in the thinnest parts with 0.4mm nozzle. You will need glue to assemble. Where necessary I added regisration keys od dovetail joint, otherwise the geometry itself acts as a registration.

Large F4U Corsair Wallart

Airplanes

cruse2382

simple jack skellington face string art.

jack Skellington string art

Halloween

MagnetDanny

Use the filament poop waste from the amazing Bambu Lab printers to fill the Poop Heart Honeycomb.&nbsp;Get creative mixing colors for a unique Heart !&nbsp;Share photos of your colorful &#34;poop&#34; artwork - it&#39;s a great reason to collect specific shades.&nbsp;Unleash your eco-friendly artistic side with this fun, recycled masterpiece.&nbsp;Easy wall mount using the Hang-It-Right Wall Hanging Guide 挂挂无忧板&nbsp;<a target="_blank" href="https://makerworld.com/en/models/248502#profileId-264755" rel="nofollow noopener">https://makerworld.com/en/models/248502#profileId-264755</a>&nbsp;<figure class="image image_resized" style="width:53.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/837144/2024-03-12_b423d28550b64.jpeg"></figure>you can resize it as needed, there are two squares in the back.&nbsp;

Poop Heart Honeycomb

Poop

Xander Designs

This box is inspired by the Gift box found in ‘Fortnite’ when you gift a friend a skin within the game. We have also gone ahead and made the box customizable in any color you wish, just like it is also in the game!No AMS? Then we have got your back! This gift box is also designed so it can be printed on standard printers without AMS and fits together nicely with simply a bit of glue. The ribbon has shapes embedded with matching shapes on the box and lid, this is to make sure you glue the correct pieces in place, as they fit together in a certain way, so double check that before glueing.&nbsp;Sell my prints commercially by joining my <a target="_blank" href="https://patreon.com/xanderdesigns?utm_medium=unknown&amp;utm_source=join_link&amp;utm_campaign=creatorshare_creator&amp;utm_content=copyLink" rel="nofollow noopener">Patreon</a>Want to say ‘Thank You’  <a target="_blank" href="https://www.buymeacoffee.com/xanderdesigns" rel="nofollow noopener">Buy me a coffee</a>

Fortnite Gift Box

Video Games

Leif3D

A lovely black &amp; white bookmark with a nature scenery.&nbsp;The size is 150x50mm with a 4mm hole for a cord of your choice. The thickness is about 2.2mm&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm&nbsp;Filaments Used: PLA Sunlu Meta Black Transmission Distance: 1 PLA Sunlu Meta Grey Transmission Distance: 3.5 PLA+ Sunlu White Transmission Distance: 5&nbsp;Swap Instructions: Start with Black At layer #12 (1.04mm) swap to Grey At layer #20 (1.68mm) swap to White for the rest.&nbsp;If you like it you also might want to check out my <a target="_blank" href="https://makerworld.com/en/@Leif3D/collections/1135672" rel="nofollow noopener">other bookmarks</a>. I&#39;ve created a whole collection to cover different genre types. All using the same 3 filament colors to keep the printing costs low.&nbsp;<figure class="image image_resized" style="width:81.99%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000190534/design/2024-02-17_2af2f296a36f5.jpg"></figure>

Nature Bookmark (HueForge)

Bookmarks

Codyinbody3

I've had a ton of you reach out asking what I use to hold/mount my helmets on my wall and I designed this to hold my helmets on the wall.&nbsp;To get a good grip you can either print the top portion (half ball) in TPU or do it the easy way I did it and use a couple strips of electrical tape to give it good friction. Enjoy!

Helmet Hanger Mount

Helmets

Mysstra hueforge

Gran cuadro de Stormtrooper con su fusil, he utilzado Hueforge para poder imprimir en 3d&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 6&nbsp;Swap Instructions: Start with Black At layer #11 (0.96mm) swap to Gray At layer #15 (1.28mm) swap to Orange At layer #16 (1.36mm) swap to Jade White for the rest.&nbsp;&nbsp;Este nuevo hueforge consta de 4 partes para hacer uno de 450mm x 450 mmSeguir estas instrucciones para el hueforge tamaño grande &nbsp;This new hueforge consists of 4 parts to make one 450mm x 450mmFollow these instructions for the large hueforge&nbsp;Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Jade White Transmission Distance: 6Swap Instructions: Start with Black At layer #13 (1.12mm) swap to Gray At layer #15 (1.28mm) swap to Orange At layer #17 (1.44mm) swap to Jade White for the rest.

Stormtrooper  Star Wars Hueforge

Star Wars

aPyroDesign

&nbsp;&nbsp;&nbsp;This Infinite Slinky Animated Fidget Spinner is designed to be printed as a multicolor print using the AMS. It can also be printed as one piece.&nbsp;This fidget spinner is unlike a standard spinner. The shapes on the spinners are frames of animation. When you spin the spinner and view the spinner through a smartphone camera, the animations come to life. There are also two other ways to view the spinners. The instructions are below for the 3 different viewing methods.&nbsp;Smartphone Camera Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/cell-phone-method" rel="nofollow noopener">HERE</a>&nbsp;Strobe Light App Instructions: Click <a target="_blank" href="https://spinnermation.com/pages/strobe-method" rel="nofollow noopener">HERE</a>&nbsp;Handheld viewer: Click <a target="_blank" href="https://spinnermation.com/pages/handheld-spinner-viewer" rel="nofollow noopener">HERE</a>&nbsp;&nbsp;You will need an r188 bearing for the spinner.Recommended bearings from Amazon: Click <a target="_blank" href="https://www.amazon.com/dp/B095GTJC1R?linkCode=ssc&amp;tag=onamztravi04a-20&amp;creativeASIN=B095GTJC1R&amp;asc_item-id=amzn1.ideas.1JB9SWU6KEPUY&amp;ref_=aip_sf_list_spv_ons_mixed_d_asin" rel="nofollow noopener">HERE</a>&nbsp;Filaments used in this project.&nbsp;Black PLA Basic: Click <a target="_blank" href="https://us.store.bambulab.com/products/pla-basic-filament?variant=41078274654344" rel="nofollow noopener">HERE</a>&nbsp;Galaxy purple for the stairs: Click <a target="_blank" href="https://shrsl.com/4hplx" rel="nofollow noopener">HERE</a>&nbsp;Silver Silk for Slinkies: Click <a target="_blank" href="https://shrsl.com/4hpm6" rel="nofollow noopener">HERE</a>&nbsp;All links are Affiliate links&nbsp;&nbsp;Files included:&nbsp;3MF file that is ready for AMS printing.&nbsp;Top and Bottom Cap files.&nbsp;Bearing Top Cap. This part is to lock in the bearing.&nbsp;Bearing top tool. This will make it easier to lock on the bearing top cap.&nbsp;Solid file for single extruders.&nbsp;&nbsp;Interested in selling my spinners? Check out my Patreon for more info. Click <a target="_blank" href="https://www.patreon.com/APD" rel="nofollow noopener">HERE</a>

Infinite Slinky Stairs Zoetrope Spinner

Stuff

Basti85

<h2>Also visit <a target="_blank" href="https://makerworld.com/en/models/166549#profileId-182942" rel="nofollow noopener">BIG Spiral Lamp V2 [WLED]</a></h2><ul><li>less filament</li><li>reduced printtime</li><li>easier assembly</li><li>WLED</li><li>video tutorial</li></ul><figure class="image image_resized" style="width:22.98%;"><a href="https://makerworld.com/en/models/166549#profileId-182942" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-02-02_7e308c88fa001.jpg"></a></figure>&nbsp;&nbsp;<h2>You can find the battery upgrade (V1 only!) <a target="_blank" href="https://makerworld.com/de/models/133588#profileId-144917" rel="nofollow noopener">here</a></h2><figure class="image image_resized" style="width:39.44%;"><a href="https://makerworld.com/de/models/133588#profileId-144917" target="_blank" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-10_625e21d2a88a4.png"></a></figure><h2>Description:</h2>&nbsp;Hi guys,&nbsp;finally → it's done :)&nbsp;<figure class="image image_resized" style="width:48.07%;"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_f98dfa77bda96.jpg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_e0e3941c1b7fd.gif"></figure>&nbsp;<h3>You need some hardware:</h3>&nbsp;<ul><li>1x USB-C plug board with charger capability (if you want to use the battery addon skip that part as I replaced it. see the other project for more details)<ul><li><a target="_blank" href="https://www.amazon.de/gp/product/B07XG5F9T3/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.de/gp/product/B07XG5F9T3/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1</a></li></ul></li><li>1x Arduino Mini<ul><li><a target="_blank" href="https://www.amazon.de/AZDelivery-PRO-MINI-ATmega328-16MHz/dp/B07RY894D5/ref=sr_1_3?keywords=arduino%2Bmini&qid=1704537139&sr=8-3&th=1" rel="nofollow noopener">https://www.amazon.de/AZDelivery-PRO-MINI-ATmega328-16MHz/dp/B07RY894D5/ref=sr_1_3?keywords=arduino%2Bmini&qid=1704537139&sr=8-3&th=1</a></li></ul></li><li>Arduino flasher:<ul><li><a target="_blank" href="https://www.amazon.de/gp/product/B01N9RZK6I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1" rel="nofollow noopener">https://www.amazon.de/gp/product/B01N9RZK6I/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1</a></li></ul></li><li>1.5m ws2812b LEDs (3x30 LEDs or 3x50cm stripes)<ul><li><a target="_blank" href="https://www.amazon.de/dp/B0BTVBTHQ5?psc=1&ref=ppx_yo2ov_dt_b_product_details" rel="nofollow noopener">https://www.amazon.de/dp/B0BTVBTHQ5?psc=1&ref=ppx_yo2ov_dt_b_product_details</a></li></ul></li><li>Jumper Cables<ul><li><a target="_blank" href="https://www.amazon.de/gp/product/B01EV70C78/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1" rel="nofollow noopener">https://www.amazon.de/gp/product/B01EV70C78/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1</a></li></ul></li></ul><h3>The filament I used:</h3><ul><li>Bambu black:<ul><li><a target="_blank" href="https://eu.store.bambulab.com/de/products/pla-matte-filament?variant=43992833261787" rel="nofollow noopener">https://eu.store.bambulab.com/de/products/pla-matte-filament?variant=43992833261787</a></li></ul></li><li>Bambu gold:<ul><li><a target="_blank" href="https://eu.store.bambulab.com/de/products/pla-silk?variant=46636020531548" rel="nofollow noopener">https://eu.store.bambulab.com/de/products/pla-silk?variant=46636020531548</a></li></ul></li><li>Bambu white:<ul><li><a target="_blank" href="https://eu.store.bambulab.com/de/products/pla-matte-filament?variant=43992833229019" rel="nofollow noopener">https://eu.store.bambulab.com/de/products/pla-matte-filament?variant=43992833229019</a></li></ul></li><li>Initially I wanted to print the diffusors with transparent PETG. I used an older spool. It worked like a charm but I got out of filament as I had some failed prints (you should really use my print profile as otherwise your prints might fail! These profiles work 100%)</li></ul>&nbsp;<h2>Instructions:</h2><h3>Preparations:</h3><ul><li>Print everything with 100% speed. Do NOT use other modes than normal mode!</li><li>Cut the LEDs (3 stripes)<ul><li>If you are not using the 60LEDs per meter stripe measure the length → just insert the stripe into the lamp. The leds should end within the lamps body on both sides this way (you just see a small edge of the stripe):</li></ul></li></ul><figure class="image image_resized" style="width:33.91%;"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_80a509040244c.jpg"></figure><ul><li>Flash the Arduino:<ul><li>Count the overall LEDs</li><li>Edit my source code (see documentation → download, remove “.txt” and open in the Arduino IDE) with that number</li><li>Flash it (see the end of the description → ATTENTION: on Windows 11 do NOT use ArduinoIDE 2.X → there seems to be a problem with the flasher. Use the old ArduinoIDE 1.X instead!!)</li></ul></li><li>Cut the cables in the half, strip the insulation and solder everything (if you want to use the battery mod flash the code from the other project as you would need to unsolder two cables in order to connect the flasher again):<ul><li>Stripes → 3 * 3 Cables → use the male plug for the output and the females for the input (see flow)</li></ul></li></ul><figure class="image image_resized" style="width:75.38%;"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_bbd3dd1e50506.jpg"></figure><ul><li>USB-C → 2 Cables → use the male plugs for the output</li></ul><figure class="image image_resized" style="width:74.81%;"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_a687aaf66c8a2.jpg"></figure><ul><li>Arduino → 5 Cables → use 2 females for AC and 3 males for power out & data lane for the stripes</li></ul><figure class="image image_resized" style="width:74.26%;"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_418bb98506736.jpg"></figure>&nbsp;<h2>NOW CONNECT EVERYTHING AND CHECK WHETHER YOUR SOLDER-POINTS ARE OK!</h2>&nbsp;<h3>Assembly:</h3>Now just follow my pictures. I will add text to the passages where you need extra information.&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_905f5905a2cb2.jpg"></figure>&nbsp;<h2>Insert the stripes to the bottom of the lamp (where the boards are places). Start with the first stripe. It needs the female plugs at the lamps bottom. Then insert the second stripe the other way round. Then insert the third stripe (the same way as the first one).</h2>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_44c803be8b4be.jpg"></figure>&nbsp;<h2>Insert the small diffusor. You may need to push the LEDs a bit. Be careful to not move the hole stripe! It should never change its position on the bottom. Pay attention to this the whole time!</h2>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_27244b9747792.jpg"></figure><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_f75ffe8bf1ed3.jpg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_fd53ed0a00255.jpg"></figure><h2> </h2><h2>Now add the big duffusors.</h2>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_bfcb68971c99b.jpg"></figure>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_a45749ef3b0cd.jpg"></figure>&nbsp;<h2>Lay the top of the lamp next to the assembled bottom and insert the stripes.</h2>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_626ffeab07a34.jpg"></figure>&nbsp;<h2>Add the remaining small diffusors.</h2>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_4b37851eac4a9.jpg"></figure>&nbsp;<h2>Move the small diffusors and the stripes step by step until you can also insert the big diffusors.</h2>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_9383d2fea99a6.jpg"></figure>&nbsp;<h2>Move the stripe, big & small diffusor step by step. Pay attention that the stripe only moves within the top. It should never change it's position on the bottom part!</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_6190b4209f917.gif"></figure><h2>Pay attention to the cables and move them trough the holes as soon as you reach them.</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_afc909a688698.jpg"></figure>&nbsp;&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_5e8d0efc9c987.jpg"></figure>&nbsp;<h2>Finally you are done with the assembly :)</h2>&nbsp;<figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_f59e9f0c48b89.jpg"></figure>&nbsp;<h2>Now connect all the cables (follow the LEDs in the spiral if you are confused). Plug the USB-C to the power and check whether everything is still working. Glue the boards if necessary. You may also have to tape the cables. Then add the lids.</h2>&nbsp;<h2>You are done and now own a f*cking cool spiral lamp :)</h2><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-06_72c4dbcc250a2.jpg"></figure><h4>(by the way.. can you guess the movie ;))</h4>&nbsp;Have fun with it!BR,B@sti&nbsp;&nbsp;<h2>Postscript - How to flash the Arduino</h2>First of all you need to download the IDE. DO NOT USE THE 2.X Version as there seems to be a problem with the flasher (this once cost me a weekend for nothing..). You can download the IDE here → <a target="_blank" href="https://downloads.arduino.cc/arduino-1.8.19-windows.zip" rel="nofollow noopener">Legacy IDE (1.8.X) - Windows as ZIP</a>. If you have another OS than Windows then just navigate to <a target="_blank" href="https://www.arduino.cc/en/software" rel="nofollow noopener">this page</a>, scroll to Legacy IDE and choose the right package.&nbsp;<ul><li>Extract / Install the software</li><li>Open the Software</li><li>Install the Neopixel library → Sketch → Include Library → Manage Libraries → search for Adafruit NeoPixel (by the times of writing the Version is 1.12.0) → Install</li></ul><figure class="image image_resized" style="width:43.2%;"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-13_f0b7feb0a436c.png"></figure><ul><li>Download my INO-File from the documentation. Delete the .txt ending and the auto added UUID. The file should end with *.ino and should be in a folder with the same name (without the INO-ending)</li><li>Open the file with the IDE</li><li>Count the amount of LEDs and change the define pictured below</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-13_c6462dfdb18e6.png"></figure><ul><li>Connect your flasher</li><li>Connect the board to the flasher</li></ul><figure class="image image_resized" style="width:25.4%;"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-13_3067d9a01c11.jpg"></figure><ul><li>Install the boards via → Tools → Board → Boards Manager → Search for Arduino AVR Board and install (by the times of writing the Version is 1.8.6)</li></ul><figure class="image image_resized" style="width:49.11%;"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-13_d948b53f589f8.png"></figure><ul><li>Select the right board after installation → Tools → Board → Arduino AVR Boards → Arduino Pro or Pro Mini</li><li>Select the right processor → Tools → Processor ATmega328P (5V, 16MHz)</li><li>Select the right Port → Tools → Port → select the available COM port. If there is no COM port available may try re-plugging the flasher. If there is still no COM port you might have to install the driver (look at the site where you bought the flasher → there should be something mentioned)</li><li>Everything should look like this (except the COM port - this can be something different on your machine)</li></ul><figure class="image"><img src="https://makerworld.bblmw.com/makerworld/draft/487344/2024-01-13_cb306245ae1a4.png"></figure><ul><li>Compile & Upload via Sketch → Upload (compiles automatically) or click the Upload button in the tool box (the second one)</li><li>You are done :) Connect the board and check whether the LEDs are shining</li></ul>

Glowing Spiral Lamp

Lamps

RobertotE-

Christmas baby yoda, with supports and layer height 0.2. Created with ams from Bambu lab----------------Baby yoda navideño, con soportes y altura de capa 0.2. Creado con ams de Bambu lab

baby yoda christmas xmas navidad Santa Claus Papa Noel

Christmas

Mechengg

This is inspired by the “Annoying Gift Box” that most people (including my wife) have seen on TikTok.&nbsp;The size of the original is quite small, and the 3 different versions of it didn't give me exactly what I was looking for. I wanted a large internal volume (4"x4"x4"), and I wanted this to look like a Christmas present with zero visible screws. So obviously I spent far too much time modeling this up and figured that I would share it for free instead of charge people for it :)&nbsp;3 BoxesRibbon & Bow120 total screws&nbsp;You do need a few dabs of CA glue to hold the inner box posts in place. :) You can add glue for the white threaded part as well but it works without it&nbsp;Thanks for viewing, and take a look at my other models for things that I have designed for myself because the originals weren't exactly what I was desiring&nbsp;EDIT: I have also designed a bin with magnetic slide lid for storing the multitude of screws. 3 partitions to separate by color :)<a target="_blank" href="https://makerworld.com/en/models/82815#profileId-88321" rel="nofollow noopener">https://makerworld.com/en/models/82815#profileId-88321</a>

Gift Box w/ 120 Screws

Gifts

bennny

VERSION 2 NOW AVAILABLE – SEE BELOW!&nbsp;I designed this Spool Adapter for the Bambu Lab AMS for my Eryone branded cardboard spools, since none of the other adapters currently available fit it properly. This design utilizes the holes of the carboard spools to help lock the adapter in place as well as an anti-slip lip at the top (prints without supports) that will prevent the adapter from coming loose inside the AMS. I exported this as a high quality STEP file and as a result the curves on the outside have no flat edges and will spin easily inside the AMS. The model only uses 9g of filament.&nbsp;&nbsp;UPDATE 1/10/23 - VERSION 2I have adapted this model and print profile to better align with my other cardboard spool models on Maker World. These changes result in faster print times and less filament usage without any changes to the quality of the print. Version 2 is named “VERSION 2 - 0.24mm layer, 2 walls, 15% infill” in the print profiles list.If you have any issues with the print please let me know via DM and I will have them sorted immediately! Thank you. :)&nbsp;Check out my other spool adapters!<ul><li><a target="_blank" href="https://makerworld.com/en/models/89117" rel="nofollow noopener">PolyMaker/PolyLite/PolySonic</a></li><li><a target="_blank" href="https://makerworld.com/en/models/106277#profileId-113445" rel="nofollow noopener">Overture</a></li><li><a target="_blank" href="https://makerworld.com/en/models/PolyMaker/PolyLite/PolySonic" rel="nofollow noopener">JAYO</a></li><li><a target="_blank" href="https://makerworld.com/en/models/119149#profileId-128189" rel="nofollow noopener">SUNLU</a></li><li><a target="_blank" href="https://makerworld.com/en/models/122273#profileId-131739" rel="nofollow noopener">eSUN</a></li><li>Inland (coming soon!)</li><li>PolyTerra (coming soon!)</li><li>eSun (coming soon!)</li><li>Duramic (coming soon!)</li></ul>

Eryone AMS Spool Adapter

Bambu Accessories

k2thestank

Now Released and more game surfaces to follow!&nbsp;The goal of slingpuck is to be the first to shoot all your pucks into your opponent's camp! A simple 2 player game.How to play&nbsp;Rules:<ul><li>1. Each player puts 5 pucks on their side.</li><li>2. The game is played with one hand.</li><li>3. Use the elastic to fire the pucks to the other side of the board.</li><li>4. Only one puck is moved at a time.</li><li>5. Slide both ends of the elastic band into the side grooves so that they snap into place.</li><li>6. As soon as the game starts, there is no pause allowed.</li><li>7. Whoever clears the board first is wins.</li></ul>Important Rules;<ul><li>When the game starts, the puck cannot be moved to clear the way of pucks</li><li>If a puck should fly out of the board, the game doesn’t pause and the player must go pick it up by himself.</li></ul>Suggested print settings:<ul><li>3 walls</li><li>10% infill</li><li>4 Top/Bottom layers (ironing is optional)</li><li>supports are optional for the puck gate if you dont trust your bridging</li></ul>Materials:<ul><li>One piece of 1.75mm to join the boards together</li><li>12 3x2mm magnets</li><li>300-350mm of 2.5-3mm elastic cord</li></ul>Changes:<ul><li>added a rounded edge /w build in layers for easier coloring/painting on the STL file as well as BL 3mf file for easier access to the attached step files inside!</li></ul>Full Ice Edition:<ul><li>Print a stick and smaller pucks and fight your way to the win the old school way! (Nets coming soon)</li><li>Uses 3x2mm magnets which will hold the nets in place and challenge your friends to classic finger hockey!</li></ul>Support:<ul><li>If you like my work and wish to help support me share and post about my designs or head over to my Cults3D or Patreon and purchase the files/subscription as well all money earned go back into my design and prototyping for new products for the community!</li></ul>Revisions:<ul><li>Dec 9 - Added more tolerance for the hinge as some were having issues getting filaments through! Also added a hole cap to plug the holes between games to prevent pucks from escaping.</li><li>Dec 27 - Added a non divider version and smaller pucks to really up the difficulty and versatility of the game</li></ul>