SixOThree

Korux

This model is a cover for a 19° rack. The model can be downloaded in its entirety or for the Bambulab printer. The version for the Bambulab printer consists of 3 parts that are joined together. The 2 main parts are plugged together and can be glued to the connecting plate if necessary. Have fun with the printer :) More parts for 19° racks will be available soon under my profile.

19° 2U Rack Cover

Home Lab

JustARandomPrinterOwner

Recently have to fine tune “Top Z distance” to make supports to detach more easily from the printed model. this one must be printed by object. &nbsp;

testing support settings

Test Prints

JamesThePrinter

Hygrometer stand for easy viewing of your humidity level inside your AMS.&nbsp;&nbsp;<h4>Print Settings</h4>No special setting are needed&nbsp;&nbsp;<a target="_blank" href="https://www.buymeacoffee.com/JamesThePrinter" rel="nofollow noopener">Buy Me A Coffee</a>&nbsp;&nbsp;The following filaments were used in the pictures above:<ul><li>Bambu Lab Matte Ash Grey PLA</li><li>Bambu Lab Basic Bambu Green PLA</li></ul>

AMS Hygrometer Stand

_To be rated

Sevro

Update:28.03.2024 - I redesigned the lamp a bit. I made it a little thicker, so now it is compatible with 12 mm LED strip and is also stronger.&nbsp;I used to this version LED STRIP from Bambu Lab Store<a target="_blank" href="https://store.bambulab.com/collections/led-strip-light/products/white-cct-tunable-cob-led-strip-light?skr=yes" rel="nofollow noopener">https://store.bambulab.com/collections/led-strip-light/products/white-cct-tunable-cob-led-strip-light?skr=yes</a>&nbsp;&nbsp;The diffuser has a larger flange and fits better into the main ring.I enlarged each piece by 110% so it now better takes advantage of bed size of the Bambu Lab printers <figure class="image image_resized" style="width: 68.55%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-03-28_e7c1da1fbecee.jpg"></figure>I created new print profile with this new design and will be develop this project with this size of lamp.If you want use front panels of other designers make sure that is proper size. If it too small just easy enlarge it to 110 % in X and Y axis <figure class="image image_resized" style="width: 44.26%"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2024-03-28_867e2b9fbfc93.png"></figure>&nbsp;02.02.2024 - New front panel added : Deer in the forest05.02.2024 - New front : Birds in love&nbsp;&nbsp;Overview.A Ring Lamp that can be changed to different situations. I designed base with various panels which can adapt to various style and occasion. You can simply change color of it as well as pattern on it, by changing color of diffuser and changing different panels.WARNINGSLed strips can emits some heat depends on what type of led you and voltage you use. In my case temperature of Main Ring achieve 60 °C . Due to this I recommend use filament that can resist that temperature especially for Main Ring. I tested ASA and it works well. Other high temperature filaments should work too (ABS, PETG but I didn&#39;t test it) PLA in this case can bend over time especially if you use heavy panel like budha.So in summary I tested and recommend :Main Ring - ASABase, Diffuser - PLAPanels- PLA or ASAIf you want change panel, always wait to cool down the ring lamp, otherwise PLA cover can bend during take off.Electric parts you need.<ul><li> led stripe - I used: LED COB 8W/1M 12 V, 8mm wide - choose one that can be cut every 2.5 cm</li></ul><figure class="image image_resized" style="width: 430.185px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/6db55f53-37bb-4cbb-ba60-486465aa3c52.webp"></figure><ul><li>dc connector - I used 2.1/5,5 mm , the diameter of the mounting hole is 11.5 mm</li></ul><figure class="image image_resized" style="width: 424.403px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/8867176f-a9e4-4554-8087-7b1fd3a6b430.webp"></figure><ul><li>OFF-ON SWITCH</li></ul><figure class="image image_resized" style="width: 424.332px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/5cf1687e-913a-4186-92f2-75d8d2bac909.png"></figure><figure class="image image_resized" style="width: 425.98px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/4ed0768e-9f72-45b5-9dc0-72aa2a703338.png"></figure><ul><li>Charger 12V</li></ul><figure class="image image_resized image-style-align-center" style="width: 434.759px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/1b0daae1-d790-41b4-a6da-4028c899a774.webp"></figure>Printed PartsMain Ring, Base and Panels can be printed in draft mode 0.28-0.30 mm layer height with no issue.Diffuser should be printed with 0.2 mm layer height.<ol><li>After print, glue led strip to inner side of Main Ring</li></ol><figure class="image image_resized" style="width: 539.361px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/55f0a8a9-5b68-4a7a-b60e-def1c0cf337a.webp"></figure>Start from hole on bottom side<figure class="image image_resized image-style-align-center" style="width: 537.429px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/8f453fdd-01d6-476e-baaa-f03826eac490.webp"></figure>2. Put Main Ring into base. It should fit tight without glue.<figure class="image image_resized image-style-align-center" style="width: 538.864px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/f03a229b-e68e-4835-9d5f-37f66a2677d0.webp"></figure>3. Insert the electric part into the base and connect them by soldering<figure class="image image_resized" style="width: 535.014px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/2e73757c-be70-46f0-8fbb-ebc700b2e62a.webp"></figure><figure class="image image_resized" style="width: 531.08px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/75ca1515-ddbf-47b2-ab0d-34d6c3b795b9.webp"></figure>4. Insert Diffuser to Main Ring”. The Main Ring has a groove into which the Diffuser should be inserted and sit steadily. The flat side to the back.<figure class="image image_resized" style="width: 529.148px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/dd5e9b3f-84e4-47dc-8964-6b93b4f6ee46.webp"></figure><figure class="image image_resized" style="width: 527.23px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/3fc14977-a473-4279-b0d1-25f667c08fba.webp"></figure>5. Insert Panel into Main ring. The Panel has cuts at the bottom to avoid cutting the cables<figure class="image image_resized" style="width: 531.08px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/f414f9b5-fc71-4e83-af57-faf01b92199e.webp"></figure><figure class="image image_resized" style="width: 529.148px"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000163227/design/d3004065-f61c-4175-b595-6235c7b8ead8.webp"></figure>&nbsp;If you any question or suggestion write to me&nbsp;Have fun

Ring Lamp with replaceable panels

Lamps

generatorlabs

Relive those nostalgic years, when you dropped a small fortune into Arcade cabinets like Donkey Kong. I have fond memories of retro classics like this and I wanted to celebrate that with this wall-mounted time capsule.&nbsp;If you have an AMS you can print this in color. If not, you can print it in a single color and add hand-painted details.The included 3MF file has multiple plates combined. Each plate is grouped into similar items & colors.No single plate requires more than 4 colors.Each character and component was hand-drawn in Fusion360 and colorized in slicer. A screenshot of the colors I used is included.Print at Standard settings and standard fill.If printed at 100% scaling the project will be approx. 23" tall by 17.5" wide. Plexiglass sheet is 26" x 21". You can scale the entire project to get your desired result & size.&nbsp;The printed pieces are attached to a sheet of plexi-glass with E6000 multi-purpose adhesive. Adhesive was applied to parts sparingly with a toothpick. If you want to add a little more excitement to the design I also include a background image. It is attached as a high resolution PDF. Once adhesive is dry you can mount in a custom picture frame.&nbsp;Attributions to the artist of the city skyline background image are as follows: "Designed by pikisuperstar / Freepik".&nbsp;I hope you enjoy my work.&nbsp;UPDATES: I created an optional frame for this project.It can be found here: <a target="_blank" href="https://makerworld.com/en/models/168692#profileId-185259" rel="nofollow noopener">https://makerworld.com/en/models/168692#profileId-185259</a>&nbsp;Another member, NxtGnPrtHub, created the “Help” scream bubble for Pauline, to add a little extra eye candy.It can be found here: <a target="_blank" href="https://makerworld.com/en/models/187392#profileId-206431" rel="nofollow noopener">https://makerworld.com/en/models/187392#profileId-206431</a> Print Settings: Printer: Bambu P1S Rafts: No Supports: No Resolution: Standard Infill: Standard Filament color: Various Colors - Army Brown, Charcoal Black, Lava Red, Pastel Peach, Sunrise Orange, Cotton White, Wood Brown, Saphire Blue Filament material: PLA Matte  Notes:Printed with 0.4 nozzle. Printed with Standard 0.20 Settings and Standard In-Fill.&nbsp;Take measurements and use painters tape to mock-up play field before using adhesive. You only get one chance if using adhesive with plexiglass.

Donkey Kong Arcade 3D Playfield

Vintage Computing

Williams Industries

We have a lot of great stuff over at the Patreon: <a target="_blank" href="https://www.patreon.com/WilliamsIndustries" rel="nofollow noopener">https://www.patreon.com/WilliamsIndustries</a>Patreon includes commercial use on all prints.

Cat Coaster

Cats

SabreDesign

Modern easter bunny decoration. The model is 110 mm tall, can be scaled up to your liking. The inside of the model is hollow to save on filament.&nbsp;If you want to support me or get commercial licenses you can join a patreon membership: https://www.patreon.com/SabreDesign&nbsp;Check out more of my designs below and on my profile:<img src="https://makerworld.bblmw.com/makerworld/draft/836500/2024-03-09_3031dfb02454e.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836500/2024-03-04_f1cfd27f8e9d5.png"> <img src="https://makerworld.bblmw.com/makerworld/draft/836500/2024-03-02_bdab38c1e474e.png">&nbsp;&nbsp;&nbsp;