Super nice! Though I am wondering the screw sizes. Do you mind if you can share the size of the screw so people can design extensions too? 😇

I have a local brand of hex keys (Biltema) all fitted except one. But it works so all good :)

The top piece could be pressure fitted to the base to print sideways to make it stronger but it is not carrying anything heavy anyways so it is nice!

Perfect holder. It is holding lighting for the printer

Now it looks much better :)

Now I need to print a base too 😇

Nice! Thanks!

holds well, nice and snug. I printed with ABS+.

Very nice! No small parts no screws and profile was good.

nice for calibration too

quite useful set

it is a bit loose but it is nice

It is great, I wish I would print the gridfinity 2x2 bottom plate though

Quite nice, I am not using very big screws and anything bigger than M5 so a more compact design can be better

Highly recommend to dry your filament well and do calibration

Really nice model but Bambulab logo is really not necessary I think 🙃

Used PLA with 0.08 layer height they are great!

Great! Filaments I used: - ClasOhlson Transparent PLA (not transparent but I like its "icy" color) - BambuLab Basic PLA Green - addNorth Glitz Saphire ePLA

Great clock, the bridge being too close to the bed is a problem though. My suggestion to everyone to print first a few lanes with no cooling and then warm it up a little if you need heated bed.