simonweisshuber

techam

<h2>Summary</h2>This adapter allows you to mount two 7mm slim 2.5&#34; HDD or SSD drives in a 3.5&#34; Slot.The adapter has mounting points on the top and sides with the same spacing as 3.5&#34; drives have. Also there are holes with 30mm spacing as floppy disk drives use them.The holes should fit for M3 Screws, to be screwed directly into the plastic.For the 2.5&#34; Drives you need four M3x12mm Allen screws.&nbsp;Have fun.

3.5" HDD adapter for two 2.5" HDD 

Computer 

mikolaj.mazik

I'm a student. If you like my work, please consider leaving a small donation, it will help me create more and more interesting models!<a target="_blank" href="https://ko-fi.com/mikolajmazik" rel="nofollow noopener">https://ko-fi.com/mikolajmazik</a>&nbsp;I would like to present you my latest model, it is a Caterpillar 6020B mining excavator which I have been designing for over two weeks, including prototyping.This is an advanced model due to the design of the tracks. It is best to print them from regular pla as it will allow you to remove the supports relatively easily. The model is adapted for rotating tracks, you only need to drill a hole in the wheels and then screw in a screw that will lock them.If you have a problem with any part, please write to me or leave a message

Caterpillar 6020B Minig Excavator- Fully 3D printable model 

Caterpillar 6020B

SprocketStudios

Update January 25, 2024: A new version of this model has been released! It prints much cleaner at the bottom, and has the same threading. <a target="_blank" href="https://makerworld.com/en/models/156286" rel="nofollow noopener">Check it out here</a>. &nbsp;This is a large threaded egg. It was designed to be large enough to hold one of <a target="_blank" href="https://www.printables.com/model/525789-articulated-dragon" rel="nofollow noopener">McGybeer's articulated dragons</a> (printed at the default size). Looks particularly good in multicolor coextruded filaments.&nbsp;It will print OK without supports, but the bottom points of some of the scales get a bit messy.&nbsp;Update January 5, 2024: There is a new “revised” version which aims to address some of the issues with the messy early layers. It's not perfect by any means, but it has a wider base which is less prone to issues. There is also improved alignment of the lower scales.&nbsp;If you would like to print this model for commercial use you must purchase a license here: https://thangs.com/designer/Sprocket%20Studios

Computer

Caterpillar 6020B

Harry Potter