Enly1

Reckit

<p>5 x 7 (127mm x 178mm) free-standing or wall-mounted portrait and landscape picture frames.</p><p>&nbsp;</p><p>No supports needed, only takes 1h50mins to print the free-standing versions including the clip-on stand. Wall mounted takes 1h40mins.</p><p><br>1mm clear perspex sheets can be used to protect the photos. I've used these and they fit perfectly <br><a target="_blank" href="https://www.amazon.co.uk/dp/B0BVZK4FKS?ref=ppx_yo2ov_dt_b_product_details&th=1" rel="nofollow noopener">https://www.amazon.co.uk/dp/B0BVZK4FKS?ref=ppx_yo2ov_dt_b_product_details&th=1</a></p><p><br>All versions are included in the .3mf file and one frame including the clip-on stand fits on the bed of P1(S) and X1C.</p>

127mm x 178mm (5in x 7in) Portrait & Landscape Picture Frames

photos 

<p>I bought a Katsu bushing kit for use with my little trim router, but ended up wanting to use them on the Triton JOF001 router. Obviously there is no way to mount these, so I created an adapter ring (white in pictures) that fits between the existing base and the metal frame and allows the bushings to be directly mounted.  No need for the Katsu plunge router adapter.</p><p>&nbsp;</p><p>Made as a snug fit so it doesn't move about once mounted, so you may need to experiment a little with your tolerances to get a nice friction fit. The adapter is held in place by the base, so it won't fly out if its a little loose, but tighter the better.</p><p>&nbsp;</p><p>Bushing set: <a target="_blank" href="https://www.aimtools.co.uk/products/105436" rel="nofollow noopener">https://www.aimtools.co.uk/products/105436</a></p><p>&nbsp;</p><p>Please note that if you want a textured surface on the bottom, you will need to flip the model and print with supports for the bushing mounts and screw holes.</p>

Triton JOF001 Router Insert / adapter for Katsu Bushings

Triton JOF001 Router Adapters

Place and Play 3D

<p>A two piece bowl for pistachio's and peanuts.</p><p>You just throw the shells in the lower bowl.</p><p>PLA.</p><p>10% infill.</p><p>0.4mm nozzle.</p><p>0.2mm layer height.</p><p>No Supports.</p>

Pistachio Bowl

random

StarSDF

<p><span style="font-size:20px;">Infuse your space with a rich festive atmosphere! Enhance the Christmas spirit. </span></p><p><span style="font-size:20px;">Diameter: 17cm, Thickness: 0.5cm. </span></p><p><span style="font-size:20px;">Thank you for your support. </span></p><p><span style="font-size:20px;">If you enjoy my creation, feel free to share your Bambu configuration file, and you also have the opportunity to accumulate points.</span></p>

Starry Christmas Sleigh

Christmas

sprior

<div><h1>Summary</h1><div><p>I wanted clamping dogs that I could use with the stock Festool MFT fence and not use the miter gauge.  This design fits with no slop in the MFT holes for precise alignment.  In addition to the print for each clamp you need 2 M6x25mm hex bolts and nuts, you'll want a pair of these.  One bolt goes down from the top into the nut in the lower knob.  The head of the other bolt engages the track in the fence and the nut goes into the tightening arm in the back - if you screw the bolt in the right amount the level will lock and unlock the track with about a 90 degree turn.  (2/25/2018) I've added an alternate bottom knob design which is bigger and easier to grab by hand.  It can be used instead of the other bottom.</p><p>I've also now added a third knob design.  For some cases the big rounded knob felt great, but was too big.  I found the 8 ridged knob designs to be a bit rough on the hands if you really needed to grip them.  So now I've added a 4 ridge knob design which should let your fingers get in there to grip them, but are still small enough to not cause clearance issues.  I'll leave the original 8 ridge design here, but I'd suggest one of the other two.</p></div><h1>Print Settings</h1><p class="detail-setting printer brand"><strong>Printer Brand: </strong>                         </p><div><p>MakerGear</p></div>                                    <pre><code>                                            <p class="detail-setting printer"><strong>Printer: </strong>                     <div><p>MakerGear M2</p></div></code></pre><p></p>                                    <p class="detail-setting rafts"><strong>Rafts: </strong>                         </p><div><p>No</p></div>                                    <pre><code>                                            <p class="detail-setting supports"><strong>Supports: </strong>                     <div><p>Yes</p></div></code></pre><p></p>                                    <p class="detail-setting resolution"><strong>Resolution: </strong>                         </p><div><p>0.2mm</p></div>                                    <pre><code>                                            <p class="detail-setting infill"><strong>Infill: </strong>                     <div><p>85%</p></div></code></pre><p></p><br><br><p class="detail-setting notes"><strong>Notes: </strong><br></p><div><p>Printed in PLA.  I used a high infill to make this part effectively solid for maximum strength.</p></div></div>

Fence dog for Festool MFT table

Emvi 3D

180° Print in Place hinges

Practical Prints

Ryxxi_makes

<p>Clips onto the Cable chain very securely and rigidly. Then snap in the bowden tube. </p><p>&nbsp;</p><p>Use pliers to remove the clips by slowly lifting one end from the cable chain.</p><p>&nbsp;</p><p>The clips are very sturdy and dont move much.</p><p>&nbsp;</p><p>&nbsp;</p>

PTFE cable chain clip for P1P/P1S and X1C

Bambu Labs P1S

Daniel Schenk

<div><h1>Summary</h1><div><p>Simple Gridfinity 5x5 box 6u height</p><p>Update:<br>V2Base and V2Lid with more clearance around the alignment features and improved locking mechanism</p><p>Hardware:<br>8x M3x6 set screw to fasten the hinges to the box<br>2x M3 Nyloc Nut for the hinges<br>2x M3x35 Socket Head Screw DIN912 for the hinges<br>2x M3x5 Socket Head Screw DIN912 to hold the sliders on the rails</p><p>Printing:<br>-&#34;block&#34; and the two hinge parts need to be printed twice<br>-printing orientation see pictures</p><p>Inspired by: <a href="https://www.printables.com/model/543553-gridfinity-storage-box-by-pred-now-parametric" rel="nofollow">https://www.printables.com/model/543553-gridfinity-storage-box-by-pred-now-parametric</a></p><p>Gridfinity by Zack Freedman: <a href="https://www.youtube.com/watch?v=ra_9zU-mnl8" rel="nofollow">https://www.youtube.com/watch?v=ra_9zU-mnl8</a></p><h1>gridfinity</h1></div></div>