Silver Harmony Studios

I was getting tired of bendeing down to pick wires up off the ground when I wanted to connect my drawing tablet to my computer or my Valve Index connection end, so I made this for the side of my computer wire. The idea is to use a bolt on your case to hold it on if you have external bolts on your computer case.&nbsp;This is for 2 wires in particular, 1 works especially with the valve index wire.&nbsp;Suggested Infill: 10% is what I printed mine at and it works&nbsp;Mounting Hole: 2.92mm Diameter (Can be resized with a drill bit to fit needs in post process)&nbsp;Left Holder: 9.7mm Diameter wire maxRight Holder: 6mm Diameter wire max

Case Mounted Wire Holder

Electronics

A stand I designed for my turntable to allow it to hold up products vertically, such as my wall art plaques I make. It should fit any turntable with a diameter at or bigger than 135mm. This file contains both .stp and .stl formats.&nbsp;V2: - Changed the end peg height by 12mm. I had forgotten to test my other plaque on it and found it was too short.&nbsp;Suggested Print Settings: (What my product pictures show) - 0.4mm Nozzle - 0.20mm Layer Height - 30% Infill - I set my slice to auto tree suppot and it put supports under the crest and underneath the front limbs, long with the curve of the limbs at the front&nbsp;Turnaround: <a target="_blank" href="https://youtube.com/shorts/CJuJf96AdRk" rel="nofollow noopener">https://youtube.com/shorts/CJuJf96AdRk</a>&nbsp;>DO NOT resell/sell it by itself >DO NOT redistribute this asset freely, please simply redirect them to this page>DO credit me if you use it

Electronics

Wall Mounted