sikora.jan.84

BODY3D

If you like my work, support me by leaving a like !Get access to really cool models every months on my PatreonAnd don't Forget to Follow me !<a target="_blank" href="https://www.patreon.com/BODY3D" rel="nofollow noopener"><img src="https://dreamityourselfmusician.com/wp-content/uploads/2020/10/patreon-france.jpg" alt="BODY3D"></a><a target="_blank" href="https://www.tiktok.com/@body_3d" rel="nofollow noopener"><img src="https://encrypted-tbn0.gstatic.com/images?q=tbn:ANd9GcSrfIHeAYT6KeLQTVHxvXORYsILY6oVXlNVmg&usqp=CAU" alt="BODY3D"></a> <a target="_blank" href="https://cults3d.com/en/users/BODY3D/3d-models" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3079230113/draft/2023-08-21_6b0967a6c4cbc.png"></a> <a target="_blank" href="https://beacons.ai/body3d" rel="nofollow noopener"><img src="https://makerworld.bblmw.com/makerworld/user/3079230113/draft/2023-08-21_63b5664660755.png"></a>

Gnome ( Christmas tree )

figurky

SlowEvo

Update 10/26: Updated models available. There are profiles for multicolor and single color. The biggest change is embossed text which will look much better when printed. Read profile details for more info. I strongly suggest you print the updated model.&nbsp;Put on display infill patterns! Looks cool too says my wife!&nbsp;<a target="_blank" href="https://makerworld.com/en/models/37162#profileId-35568" rel="nofollow noopener">Check out v2 here!</a>&nbsp;I wanted to display infill options so that I can more easily visualize and feel the strength. A big reason for making this was to show my friend who only used cubic, I wanted to show him he had a plethora of options.&nbsp;Blocks are 30x30x8.6. Since the first outer wall is a different color from the infill and there's a small gap, the infill is 29.1x29.1. I originally wanted it to be only infill with no outer wall but I was having difficulty and I like the way it came out like this so I didn't try to tweak anymore.&nbsp;You'll see in the 3mf for the modifiers..<ul><li>Wall loops - 0</li><li>Top shell layers - 0</li><li>Sparse infill density - 15%-20%</li><li>Sparse infill pattern - different for each block</li></ul>I had to leave a tiny gap in between the outer wall that surrounds the infill blocks so that I was able to paint them.&nbsp;Total model size: 133x166.8x10&nbsp;Note: Infill patterns missing are adaptive cubic and lightning*. 1. because adaptive cubic can't really be shown with this 2. lightning infill I believe is (usually) the least practical infill 3. I wanted it wanted to be symmetrical. Also, Octagram Spiral and Archimedean Chords aren't really shown properly since they aren't in the center of the model**.*The updated models contain lightning infill. It replaced Support Cubic since it looks too similar to Cubic in this model.** The updated model is rearranged to have Octagram Spiral in the center.&nbsp;*.f3d and STEP are included in case you'd like to add to them or remix in any way.*Unfortunately due to profile farmers starting to download, change negligible things in the model and uploading them as remixes(often without stating what was changed) I have taken down STEP and f3d files. If you would like these files you may message me and we can figure out a way for me to send them to you. Unfortunately the minority of people ruin it for everyone. I know this won't stop it but it's a deterrence. For now, I still have the license allowing remixes. I'll change the license if necessary. I apologize I had to do this.

Infill Display

geometrie

OurAngryBadger

Do you have the following printer errors when printing with the AMS? Failed to pull out the filament from the extruder Failed to feed the filament into the toolheadWell, give this little mod a try!In my case, I found the most common cause of these errors to be the PTFE tube having too much of a curve as it enters the extruder. This little bracket easily clips onto the cable guide on top of the extruder body and keeps it straight.NOTE: This is a remix of Bambu Lab's own design, they are providing the (unmodified) STL file of this to some users who contact support about AMS problems. In this remix, I made the following changes:<ol><li>Added hole for the PTFE tube instead of open-bottom, this way the tube does not slide out as the print head moves.</li><li>Modified design for easier printing with no supports needed.</li><li>Shaved 2mm off the top of the model so it can never bang against the glass lid of the printer like Bambu's design did.</li><li>Orientated the model properly for printing.</li><li>Added windows on the side for a more mechanical look and visibility of PTFE tube.</li></ol>Will it fix your problems?Maybe, maybe not. I think the AMS system on this printer needs a lot of refinement, but since I have created this and installed it, I have noticed a lot less error messages. It's only 1.3 grams of filament and 5 minutes to print, so give it a shot. Printing settings:<ul><li>Print in PETG, ABS, ASA, Poly, or Nylon. PLA will not survive.</li><li>Print at 0.16mm layer height with 0.4mm nozzle.</li><li>Print with a large brim around the base - I recommend 15mm brim.</li><li>No supports are needed with most materials.</li></ul>How to install:<ol><li>Straighten PTFE tube (bend) by hand to be very straight (according to Bambu).</li><li>Slide PTFE tube through hole in bracket.</li><li>Insert PTFE tube into extruder to lock in place.</li><li>Slide the straightener down the PTFE tube and onto the coupler inside the extruder.</li><li>Press it down onto the coupler inside the extruder to lock into place.</li><li>If properly installed it should swivel around, and look like the photos.</li></ol>Leave a rating and some feedback!Let me know if this helps at all, and also let me know if you can think of any improvements I could make to the design.

Bambu X1 / P1S / P1P PTFE Extruder Bracket AMS Error Fix 

tiskarna upgrade

blecheimer

This is a spoon that allows fast and precise spooning. You can easily fill your smallest and largest desiccant containers without spilling the tiny pearls - say goodbye to funnels. The unscaled spoon can hold ~12ml that is 10g of silica-gel pearls.&nbsp;Update: Based on a comment of user fish_ I made a stand for this spoon: <a target="_blank" href="https://makerworld.com/de/models/28648#profileId-25036" rel="nofollow noopener">https://makerworld.com/de/models/28648#profileId-25036</a>&nbsp;Disclaimer: This work by blecheimer is licensed under <a target="_blank" href="http://creativecommons.org/licenses/by-nc-sa/4.0/?ref=chooser-v1" rel="nofollow noopener">CC BY-NC-SA 4.0</a> You are not allowed to copy this model to other 3D printing websites without my permission.

Spoon for Fast & Precise Spooning

nářadí k tiskárně 

squinn

A cute little baby turtle that looks great sitting up on two legs, standing on all four, or just laying down to get some rest. This is an easy print-in-place that has been carefully designed to require no supports, and (at just 6 cm long) it's a fun size that only requires 14 grams of filament and prints quick.

Cutie Baby Turtle

zvířátka 

Lofted Goods

A mid century modern vase.&nbsp;No supports needed. Easy print. Can be scaled up or down however you like.&nbsp;Filament and hardware/non 3D printed items for this model can be found on my Amazon Storefront, linked here: <a target="_blank" href="https://hendricks.design/links/" rel="nofollow noopener">https://hendricks.design/links/ </a>

figurky

geometrie

tiskarna upgrade

nářadí k tiskárně

zvířátka

vazy