showphi

南北时光

对于想4个颜色打印的伙伴，建议打印多个，打印一个出现瑕疵的概率会增加，并且打印的时间会很长，多个打印时间也并不会增加太多，所以性价比会更高。并且腹部可以尝试加一个支撑，来获得更好的腹部质量。感谢@user_302746402 的建议和反馈For friends who want to print in four colors, I suggest printing multiple copies. The probability of defects increases when printing just one, and the printing time is long. Printing multiple copies won&#39;t significantly increase the time. Additionally, consider adding support to the abdomen for better quality. Thanks to @user_302746402 for the suggestion and feedback! -----------&nbsp;这是抽空做的一个小柴犬的站立姿态模型，想法就是做一只看着就很开心的小柴犬，在这充满压力的每一天里看到小狗会让你紧绷的心情稍微放松些。我打印的版本是有些瑕疵的，比如耳朵和嘴巴。在上传的文件里把这里修复了，只是我就没有再次打印了，等什么时候机器有空再打印一堆小模型。具体说明在 站姿说明.jpg 图片中。在打印的过程当中最开始是打算开起支撑的，我比较担心肚子那会有问题，然而在打印的过程当中却忘记选择这个选项，结果还都成功打印了出来，蛮开心的。 脸部侧面偏下应该悬垂面太大，有些堆积，我不确定是否更改参数或者能修改模型的伙伴能自己调整一下，效果应该会更改好些。另外还上传了一个坐下姿态的小狗狗，可以去看看，感谢您的喜欢！^ ^ This is a standing posture model of a Shiba Inu that I made in my spare time. The idea is to create a Shiba Inu that looks very happy. Seeing a little dog in this pressure-filled day will help relax your tense mood a little.The version I printed has some flaws, such as the ears and mouth. I have made the repairs in the uploaded file, but I have not printed it again. I will print a bunch of small models when the machine is available. The specific instructions are in the &#34;Standing Posture Instructions.jpg&#34; image.At the beginning of the printing process, I initially intended to use supports because I was concerned about potential issues with the belly. However, I forgot to select this option during the printing process, but the results still turned out to be successful, which made me quite happy.The hanging surface of the lower face on the side profile should be reduced, and there is some accumulation. I am not sure whether changing parameters or manually adjusting the model can fix it. The effect should be improved as a result.I have also uploaded a sitting posture model of a little dog. You can have a look at it. Thank you for understanding and liking it! ^_^

卡通小狗  柴犬  站立 |  Cartoon small dog Shiba Inu

摆件

PREMIUMTEA

Step into the future of compact computing with our sleek NAS mini-ITX case,a marvel of modern design where industrial meets openness. 🌟&nbsp;Imagine a space where your tech dreams aren’t confined by dimensions.Our pioneering model is the first in a series that champions the mini-ITX mainboard—a testament to our commitment to powerful performance in a petite package.&nbsp;No bulky graphic cards. No oversized power supplies. Just the streamlined efficiency of an SFX power unit.&nbsp;This isn’t just a case; it’s the heart of your Network Attached Storage (NAS) assembly, crafted to bring your data together in a symphony of accessibility and security. 🛡️&nbsp;And for those who crave a little extra, hold tight! The next iteration whispers promises of graphic card compatibility—a nod to the gamers, the designers, the dreamers. Stay tuned! 🚀Download now and join the revolution of refined computing. Your NAS mini-ITX case awaits.&nbsp;&nbsp;&nbsp;Bill of Materials&nbsp;M3x10 Socket Head Cap Screw (16 pcs)M3x5x4.5 Brass Threaded Heat Set Insert Nut (16 pcs)M4x8 Socket Head Cap Screw (6 pcs)M4 Hex Nut (6 pcs)Rubber Feet (6 pcs)

Sleek NAS mini-ITX case

Hugo

<h3>The reason behind this project</h3>I absolutely love 3D-printed storage systems, but there&#39;s one thing I don&#39;t like about them: how the bins connect to each other. With most systems out there, you need to print a base grid or tiny connecting pieces, which is a bit of a hassle. And the attempts at interconnecting storage systems are not aestheticly pleasing. That&#39;s why I came up with this new design! I wanted interlocking bins of various sizes that can connect on each side but with a sleek and simple design.I&#39;ve also added small bumps on the inside, which means you can add accessories and customise each bin to a dedicated task.And to create custom storage boxes, I&#39;ve adapted my <a href="https://www.printables.com/model/761101-snaplock-storage-boxes" rel="nofollow">SnapLock </a>model to accommodate the bins.&nbsp;<h3>How to choose the size</h3>The standard bin, Bin_1x1x1, is 60x60x50mm outer dimensions.All the dimensions in the STL names are based on those dimensions*Every bin is named as follow : Bin_length x width x heightThe other flat components such as lids are named : Lid_length x width&nbsp;*The other bins are not exact multiples of the standard bin as I take into account the interconnecting part&nbsp;<h3>Test print</h3>I encourage you to test the fit by printing 2 Bin_1x1x0.5It should be a nice, snug fit, but not so tight that it&#39;s impossible to split.&nbsp;<h3>Printing</h3>All the STLs are oriented to be printed directly No support neededYou can use any materialThe sweet spot between material use and rigidity for me is 2 walls ans 5% infill with a 0.4mm nozzle (bigger nozzle should work as well)&nbsp;<h3>Accessories </h3>You can even put the bins on their side to act as drawers.For the moment I have designed several accessories that fit inside or outside the bins :<ul><li>Drawers (I used the plastic&#39;s elasticity to lock them in place while closed)<ul><li>Assembled drawer</li><li>Screw drawer</li></ul></li><li>Lid (to close any bin</li><li>Screw organizer</li><li>Tray</li><li>Battery holder</li><li>Pen holder</li><li>SnapLock storage box</li></ul>&nbsp;Feel free to give me some feedback if you give this project a try :)

BinLink

盒子

EPIQ3D

Make All your herbs easy in the kitchen.This planter ensures that your herbs stay fresh and hydrated.If you dont yourself use fresh herbs, i know this will be a great gift for those who do.&nbsp;<figure class="image image_resized" style="width:89.55%;"><img src="https://makerworld.bblmw.com/makerworld/draft/863886/2024-04-09_f6ffd46161a02.png"></figure>&nbsp;The Design is made to be as simple as possible, and blend into any kitchen aesthetic.There a two different patterns, because i could&#39;nt decide witch i liked best.So why not upload both of them :)&nbsp;<h3>HOW IT WORKS</h3>The self watering planter is designed to slowly absorb water from the reservoir (This needs to be filled up occasionally).Its a one piece print (uni body) with a clear and visible water reservoir, so you dont need to lift a inner pot, or rely on a floater to tell you how much water is left.&nbsp;Simply just look in the in the reservoir, and fill it up if needed.&nbsp;<figure class="image image_resized" style="width:88.82%;"><img src="https://makerworld.bblmw.com/makerworld/draft/863886/2024-04-09_d7e73f43dae5c.png"></figure>&nbsp;There are 3 water inlets to the center, where it is recommended to use a wicking material at the bottom.This helps to absorb water into the soil slowly. You can place a couple of cotton balls / cotton wool in the bottom of the pot.I recommend filling wicking material so it is above the reservoir edge, then fill with soil, and your herb of choice.&nbsp;<figure class="image image_resized" style="width:88.79%;"><img src="https://makerworld.bblmw.com/makerworld/draft/863886/2024-04-09_ec6f3714a17fa.png"></figure>The water inlets has a light slope towards the center, so all the water is utilized&nbsp;&nbsp;UPDATE - I have added a funnel, for making it easier to fill soil in the planter, without spilling soil in the water reservoir.&nbsp;<figure class="image image_resized" style="width:52.95%;"><img src="https://makerworld.bblmw.com/makerworld/draft/863886/2024-04-16_31e6442045a85.png"></figure>&nbsp;Basic print settings:<ul><li>Infill : 10%</li><li>Walls: 3</li><li>Top/bottom shell layers: 3</li><li>No support needed</li></ul>Dimensions: Soil area has a diameter of 80 mm, and a total hight of 108 mm.

Self watering Grail planter

花瓶

NagyBig

The pack was meant for decorative purposes.&nbsp;All parts are interchangeable, insert core and glue it.&nbsp;Original upload date: 2023 Dec. 14Updated Jan. 11, Core pieces.

Kunai pack

玩具

LP PRINT

NUT iso stanadrd M2 to M10 measure

NUT iso stanadrd M2 to M10 measure

Tool

Adam L

Update (5/3/23): I would now recommend that people consider trying the ShortStack Remix linked in the 4/17/23 update directly below if it meets your needs. Its been used for a few weeks with decent success, and seems mostly equivalent to this mod but is less filament to print and is more compact & stiffer, leading to less restriction on filament movement overall. Update (4/17/23): There is now a "short-stack" variation of the model, posted as a remix here: <a target="_blank" href="https://makerworld.com/en/models/15497#profileId-15292" rel="nofollow noopener">https://makerworld.com/en/models/15497#profileId-15292</a> <img src="https://media.printables.com/media/prints/338542/rich_content/734d9458-5713-4b61-8d54-812587b5e426/screenshot-2023-04-17-193716.png#%7B%22uuid%22%3A%22e6c39bc6-6e81-4036-9e81-9e7015b09e3c%22%2C%22w%22%3A1156%2C%22h%22%3A867%7D">Pros/cons versus this model listed in the link above.&nbsp;Update (4/11/23): Someone pointed out I posted the wrong STEP for the P1P version. Uploaded the right STEP file. Thanks!Update (1/26/23): Added a P1P version to address collision issues with frame on that printer. X1 users should use the original. I don't have a P1P, but a user has kindly verified that this version works for them. Note that this version might be harder to print because of lower bed surface area and you might want to go pretty slow printing it. Would suggest using a small layer height like 0.16, and/or use a nice wide brim with small brim gap.&nbsp;This remix combines what I consider to be the best of multiple solutions to this problem:<ul><li>Snap-on ease of use from the semi-official Bambu PTFE bracket<ul><li>But this bracket had routing issues that caused the tube to be either too tight or to hit the top glass.</li></ul></li><li>Superior arc/design from Mowcius's for curvature and keeping the tube angled correctly.<ul><li>But this design came in two parts that had to be shoved together, and also tended to have the part rub the top glass. It also has a thin support arm that tended to be just a little too easy to break in ABS for me, so I thickened it.</li></ul></li></ul>This design has the snap-on abilities of the Bambu PTFE bracket, with the better curvature of <a target="_blank" href="https://www.printables.com/model/309088-bambu-lab-x1-ptfe-minimum-radius-guide" rel="nofollow noopener">the Mowcius bracket</a>, and the added strength on the support arm by adding 1.5 mm thickness to it. I hope it works for you !Tons of credit to <a target="_blank" href="https://www.printables.com/social/434562-davidja92" rel="nofollow noopener">davidja92</a> who made a remix like this with a mesh-mix style. I remodeled <a target="_blank" href="https://www.printables.com/model/337720-mowcius-radius-fix-with-bambu-type-connector" rel="nofollow noopener">his approach </a>here with my own finishing touches in CAD for a cleaner model and stronger arm.Printed at 102% scale in black ABS @0.2 layer height. If you print in PETG or other plastic that shrinks less than ABS, I would suggest trying 100% scale. I'm sure it works well at smaller layer heights as well.

摆件

PC

盒子

花瓶

玩具

Tool

Bambu