shoupet85

Naruto - Filament Painting Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic WHITE Transmission Distance: 5 Swap Instructions: Start with Black At layer #15 (1.28mm) swap to Red At layer #24 (2mm) swap to Yellow At layer #28 (2.32mm) swap to WHITE for the rest. How to do more than 4 colors on a single AMS? To use more than 4 colors with a single AMS is pretty simple when it comes to HueForges. Always start the print from either Bambu Studio or Bambu Handy App - This will allow you to map the rolls of filaments to a certain slot in the AMS: <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000443164/design/2024-04-18_0f99fb49a11e7.png"> Now map the first 4 colors (which should already be inserted in the AMS to Slots 1 - 2 - 3 - 4 Once thats done move to maping colors 5 - 6 - 7 - 8 to respectively AMS Slots 1 - 2 - 3 - 4 again! <img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000443164/design/2024-04-18_55b3ae6ccce94.png"> This will allow you to Change the rolls of filament once the printer is done with that color. For example, in the picture above once we are done with the Black color (Which is usually first) we are going to remove the black roll (you can do that while printing) with White, then once Charcoal Black is done we are going to change that to Red, Dark Gray to Yellow and we are done. ~ You can do that with as many colors as you need! All my SINGLE AMS profiles will have a pause at the last layer of the 4th color so you can switch rolls 1,2,3 before continuing the print. This is to help you if you are not able to monitor the print and switch colors on time. (working, sleeping, giving attention to the wife)

Naruto - Filament Painting

A TESTER

Mr.Jay

In continuation of my succesful <a target="_blank" href="https://makerworld.com/en/models/84398#profileId-93193" rel="nofollow noopener">party coasters</a> and <a target="_blank" href="https://makerworld.com/en/models/86006#profileId-91912" rel="nofollow noopener">party coasters V2</a>, I made:&nbsp;Don't put a cup of hot coffee or tea on them when printing on PLA. They will warp. If you want them for coffee or tea, use PETG instead.&nbsp;Collection of 6 coasters. Easy print, about 45 minutes to 1 hour per coaster. Print upside down for a nice top finish. If you use the textured PEI plate, the will sparkle.&nbsp;Size 9 cm (you can resize them if you want), 4 colors, only 11 color changes. I printed mine in colors black, red, silver and gold (PLA)&nbsp;Make sure your bed is level and clean.&nbsp;<a target="_blank" href="https://makerworld.com/en/u/2093862659/collections/131891" rel="nofollow noopener">Click here for my collection of coasters.</a>

A TESTER

St_Valentin