shipeezy

camping

BLUGUELL

I designed this cup holder to mount inside of my flip over ice shack for ice fishing. The design works on a dove tail clip system in which the female clip is bolted to the surface you wish to mount the cup holder to using two M3 bolts. The cup holder body has the male clip attached to it. The male clip will easily slide and lock into the female clip, making this easy to install and remove for transport. The cup holder insert then slides right into the body and seats on the beveled flange This could be glued together or kept separate. It was designed in 3 pieces to avoid the need for supports. The files are not oriented properly for printing but are just as I designed them. It should be fairly obvious of how to orient them on the build plate but if you are having trouble…The female clip should stand vertically on the build plateThe cup holder body should lay face down on the build plate with the male clip standing verticallyand the cup holder insert should sit just as a cup would sit on your counterThis system was designed to free up space in my flip over ice shack, since space is limited when transporting gear from spot to spot. The sliding dove tail clip allows for accesories to be stored in transport and to be easily installed when setting up. This keeps the body of the sled clear for packing larger items such as heaters, electronics and minnow buckets.I have also designed a few other accessories to work with this system. <a href="https://www.printables.com/model/371608-mountable-ice-rod-holder" rel="nofollow">Mountable Ice Rod Holder by blueguell | Download free STL model | Printables.com</a><a href="https://www.printables.com/model/371615-mountable-tray" rel="nofollow">Mountable Tray by blueguell | Download free STL model | Printables.com</a>I have included the fusion files for the clip system if anyone would like to remix and add more accessories to this system.

Mountable Cup Holder

canoe

FyreB1rd

I'm offering a 3D printed protective case designed specifically for the DJI Goggles 2. The case is shaped to fit the goggles snugly, with cutouts for easy access to ports and buttons. It's made of durable material that keeps the goggles safe from everyday knocks and scratches.Features:<ul><li>Tailored fit for DJI Goggles 2</li><li>Durable construction</li><li>Easy-open lid for quick access</li><li>Compact and light for travel</li><li>Internal compartment for cables and accessories</li></ul>This protective case is perfect for anyone looking to keep their DJI Goggles 2 in great condition, whether at home or on the go. Now available for order through MakerWorld.

DJI Goggles 2 Box

drone

Toyota Man

This is a wall mount I designed in Fusion 360 to hold my Nintendo 64 collection. I would recommend printing with more than 4 walls and a fairly high infill density. Also it's probably best to print in black or the same color as your wall just for asthetics. It's by no means perfect, feel free to alter or remix it.

N64 Wall Mount

gaming

Mirkosa

Okie Dokie!&nbsp;Designed to hold a wide variety of aroma pads, including any standard sized Cotton Rounds which can be found just about anywhere in the makeup section. I use “premium” woven cotton rounds with essential oils, super cheap, work great and they&#39;re easily obtainable.&nbsp;Cautionary note: Since this will be left in your car, take note that PLA could potentially warp over time due to the heat. Use your own discretion when choosing which filament to use. PETG, ABS, ASA would withstand high temps much better.&nbsp;Outer Dimensions:Approx. 87mm (3.43&#34;)Internal Dimensions: 60mm (2.36&#34;) diameter4mm (0.16&#34;) thick&nbsp;~Print Profiles~Shaded: The look of this will vary depending on your specific filaments. It is designed specifically for White, Black, Blue and Yellow/Gold and prints at 0.08mm layer heights to blend colors slightly. I would suggest printing only the smaller half first to see if it will look good before printing the rest.&nbsp;The filaments I used in my photos are:Elegoo Rapid PLA+ WhiteElegoo Rapid PLA+ BlackJayo Silk BlueJayo Silk Gold&nbsp;Unshaded: Easier and faster to print at 0.2mm layer heights and does not rely on blending colors, but it uses 5 colors for optimal results.&nbsp;Extra profiles are available in the raw downloads for Orca slicer. These profiles will let you easily customize the number cutout on the uniform. To change it, open the orca profile in Orca Slicer &gt; Right-Click on the numbers &gt; Edit Text.<figure class="image image_resized" style="width:54.38%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000440208/design/2024-04-23_717a3efd6aef7.png"></figure>You should see this box come up:<figure class="image image_resized" style="width:57.53%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000440208/design/2024-04-23_bf6b651bee07e8.png"></figure>Simply change the number here and press Enter. Do this for both halves. You can also adjust the size here if needed.&nbsp;&nbsp;&nbsp;~Assembly Instructions~Before assembling, go over the inner surface and use a razor or some sandpaper to smooth out any rough areas. The inside needs to be as smooth as possible to prevent the inserts from getting snagged.&nbsp;Assembly is pretty straightforward, just be sure you put the hinge in place before pressing the 2 halves together. Once it is assembled, it may be difficult to take apart without breaking one of the connections. So don&#39;t forget to smooth out the inner surface first. The hand should stay in place on it&#39;s own, but if it&#39;s loose, use a couple drops of glue.<figure class="image image_resized" style="width:66.23%;"><img src="https://makerworld.bblmw.com/makerworld/model/DSM00000000440208/design/2024-04-23_127cd33a497488.gif"></figure>&nbsp;&nbsp;&nbsp;For the inserts, there&#39;s no right or wrong way to do it. You can use cotton rounds like I do, or pads specifically marketed as aroma pads. Essential oils work great for the scent, I use 8-10 drops and it&#39;s perfect for me, but you could use more or less. Mine has been in my car for a week now, and it still smells great.&nbsp;Licenses:&nbsp;Selling physical prints of my files with attribution is OK&nbsp;Re-uploading or selling my digital files is not

Reusable Vault Boy Air Freshener (4 Colors)

vehicle

Oclure

mount for your 5" random orbit sander for wall control pegboard systems&nbsp;this is a centerpiece i made to fit the DDD wall control accessories system made by Allen Dersha his project can be found at <a target="_blank" href="https://github.com/aderusha/DDD-Printable-Wall-Control-System" rel="nofollow noopener">https://github.com/aderusha/DDD-Printable-Wall-Control-System</a> and<a target="_blank" href="https://www.printables.com/model/52618-ddd-printable-wall-control-system" rel="nofollow noopener">https://www.printables.com/model/52618-ddd-printable-wall-control-system</a>&nbsp;the rest of my accessories I've designed for the system can be found here <a target="_blank" href="https://makerworld.com/en/u/2234273742/collections/102156" rel="nofollow noopener">https://makerworld.com/en/u/2234273742/collections/102156</a>&nbsp;the following parts from Allens project were used in mounting this model to my pegboard- 3x5 Angle Bracket Inverted Left- 3x5 Angle Bracket Inverted Right- 3x6 Locking Spacer- 8mm lock pin x 2

camping

canoe

drone

gaming

vehicle

tools